Damping system for torsion modes of mirror isolation filters in TAMA300

Y. Arase, R. Takahashi, K. Arai, D. Tatsumi, Mitsuhiro Fukushima, T. Yamazaki, Masa Katsu Fujimoto, K. Agatsuma, N. Nakagawa

Research output: Contribution to journalArticle

Abstract

The seismic attenuation system (SAS) in TAMA300 consists of a three-legged inverted pendulum and mirror isolation filters in order to provide a high level of seismic isolation. However, the mirror isolation filters have torsion modes with long decay time which disturb the interferometer operation for about half an hour if they get excited. In order to damp the torsion modes of the filters, we constructed a digital damping system using reflective photosensors with a large linear range. This system was installed to all of four SASs. By damping of the target torsion modes, the effective quality factors of the torsion modes are reduced to less than 10 or to unmeasurable level. This system is expected to reduce the inoperative period by the torsion mode excitation, and thus will contribute to improve the duty time of the gravitational wave detector.

Original languageEnglish
Article number012027
JournalJournal of Physics: Conference Series
Volume122
DOIs
Publication statusPublished - 2008
Externally publishedYes

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Dive into the research topics of 'Damping system for torsion modes of mirror isolation filters in TAMA300'. Together they form a unique fingerprint.

  • Cite this

    Arase, Y., Takahashi, R., Arai, K., Tatsumi, D., Fukushima, M., Yamazaki, T., Fujimoto, M. K., Agatsuma, K., & Nakagawa, N. (2008). Damping system for torsion modes of mirror isolation filters in TAMA300. Journal of Physics: Conference Series, 122, [012027]. https://doi.org/10.1088/1742-6596/122/1/012027