Delayed fracture of beta titanium orthodontic wire in fluoride aqueous solutions

Kazuyuki Kaneko, Ken'ichi Yokoyama, Keiji Moriyama, Kenzo Asaoka, Jun'ichi Sakai, Michihiko Nagumo

    Research output: Contribution to journalArticle

    75 Citations (Scopus)

    Abstract

    Hydrogen embrittlement of a beta titanium orthodontic wire has been examined by means of a delayed-fracture test in acid and neutral fluoride aqueous solutions and hydrogen thermal desorption analysis. The time to fracture increased with decreasing applied stress in 2.0% and 0.2% acidulated phosphate fluoride (APF) solutions. The fracture mode changed from ductile to brittle when the applied stress was lower than 500MPa in 2.0% APF solution. On the other hand, the delayed fracture did not occur within 1000h in neutral NaF solutions, although general corrosion was also observed similar to that in APF solutions. Hydrogen desorption of the delayed-fracture-tested specimens was observed with a peak at approximately 500°C. The amount of absorbed hydrogen was 5000-6500 mass ppm under an applied stress in 2.0% APF solution for 24h. It is concluded that the immersion in fluoride solutions leads to the degradation of the mechanical properties and fracture of beta titanium alloy associated with hydrogen absorption.

    Original languageEnglish
    Pages (from-to)2113-2120
    Number of pages8
    JournalBiomaterials
    Volume24
    Issue number12
    DOIs
    Publication statusPublished - 2003 May

    Fingerprint

    Orthodontic Wires
    Fluorides
    Acidulated Phosphate Fluoride
    Titanium
    Wire
    Hydrogen
    Phosphates
    Thermal desorption
    Hydrogen embrittlement
    Corrosion
    Immersion
    beta titanium
    Titanium alloys
    Desorption
    Hot Temperature
    Degradation
    Mechanical properties
    Acids

    Keywords

    • Beta titanium
    • Delayed fracture
    • Fluoride
    • Hydrogen embrittlement
    • Orthodontic wire
    • TMA

    ASJC Scopus subject areas

    • Biotechnology
    • Bioengineering
    • Biomedical Engineering

    Cite this

    Kaneko, K., Yokoyama, K., Moriyama, K., Asaoka, K., Sakai, J., & Nagumo, M. (2003). Delayed fracture of beta titanium orthodontic wire in fluoride aqueous solutions. Biomaterials, 24(12), 2113-2120. https://doi.org/10.1016/S0142-9612(02)00642-7

    Delayed fracture of beta titanium orthodontic wire in fluoride aqueous solutions. / Kaneko, Kazuyuki; Yokoyama, Ken'ichi; Moriyama, Keiji; Asaoka, Kenzo; Sakai, Jun'ichi; Nagumo, Michihiko.

    In: Biomaterials, Vol. 24, No. 12, 05.2003, p. 2113-2120.

    Research output: Contribution to journalArticle

    Kaneko, K, Yokoyama, K, Moriyama, K, Asaoka, K, Sakai, J & Nagumo, M 2003, 'Delayed fracture of beta titanium orthodontic wire in fluoride aqueous solutions', Biomaterials, vol. 24, no. 12, pp. 2113-2120. https://doi.org/10.1016/S0142-9612(02)00642-7
    Kaneko K, Yokoyama K, Moriyama K, Asaoka K, Sakai J, Nagumo M. Delayed fracture of beta titanium orthodontic wire in fluoride aqueous solutions. Biomaterials. 2003 May;24(12):2113-2120. https://doi.org/10.1016/S0142-9612(02)00642-7
    Kaneko, Kazuyuki ; Yokoyama, Ken'ichi ; Moriyama, Keiji ; Asaoka, Kenzo ; Sakai, Jun'ichi ; Nagumo, Michihiko. / Delayed fracture of beta titanium orthodontic wire in fluoride aqueous solutions. In: Biomaterials. 2003 ; Vol. 24, No. 12. pp. 2113-2120.
    @article{87ebd876abb746c98c3b37e1c57d8ebd,
    title = "Delayed fracture of beta titanium orthodontic wire in fluoride aqueous solutions",
    abstract = "Hydrogen embrittlement of a beta titanium orthodontic wire has been examined by means of a delayed-fracture test in acid and neutral fluoride aqueous solutions and hydrogen thermal desorption analysis. The time to fracture increased with decreasing applied stress in 2.0{\%} and 0.2{\%} acidulated phosphate fluoride (APF) solutions. The fracture mode changed from ductile to brittle when the applied stress was lower than 500MPa in 2.0{\%} APF solution. On the other hand, the delayed fracture did not occur within 1000h in neutral NaF solutions, although general corrosion was also observed similar to that in APF solutions. Hydrogen desorption of the delayed-fracture-tested specimens was observed with a peak at approximately 500°C. The amount of absorbed hydrogen was 5000-6500 mass ppm under an applied stress in 2.0{\%} APF solution for 24h. It is concluded that the immersion in fluoride solutions leads to the degradation of the mechanical properties and fracture of beta titanium alloy associated with hydrogen absorption.",
    keywords = "Beta titanium, Delayed fracture, Fluoride, Hydrogen embrittlement, Orthodontic wire, TMA",
    author = "Kazuyuki Kaneko and Ken'ichi Yokoyama and Keiji Moriyama and Kenzo Asaoka and Jun'ichi Sakai and Michihiko Nagumo",
    year = "2003",
    month = "5",
    doi = "10.1016/S0142-9612(02)00642-7",
    language = "English",
    volume = "24",
    pages = "2113--2120",
    journal = "Biomaterials",
    issn = "0142-9612",
    publisher = "Elsevier BV",
    number = "12",

    }

    TY - JOUR

    T1 - Delayed fracture of beta titanium orthodontic wire in fluoride aqueous solutions

    AU - Kaneko, Kazuyuki

    AU - Yokoyama, Ken'ichi

    AU - Moriyama, Keiji

    AU - Asaoka, Kenzo

    AU - Sakai, Jun'ichi

    AU - Nagumo, Michihiko

    PY - 2003/5

    Y1 - 2003/5

    N2 - Hydrogen embrittlement of a beta titanium orthodontic wire has been examined by means of a delayed-fracture test in acid and neutral fluoride aqueous solutions and hydrogen thermal desorption analysis. The time to fracture increased with decreasing applied stress in 2.0% and 0.2% acidulated phosphate fluoride (APF) solutions. The fracture mode changed from ductile to brittle when the applied stress was lower than 500MPa in 2.0% APF solution. On the other hand, the delayed fracture did not occur within 1000h in neutral NaF solutions, although general corrosion was also observed similar to that in APF solutions. Hydrogen desorption of the delayed-fracture-tested specimens was observed with a peak at approximately 500°C. The amount of absorbed hydrogen was 5000-6500 mass ppm under an applied stress in 2.0% APF solution for 24h. It is concluded that the immersion in fluoride solutions leads to the degradation of the mechanical properties and fracture of beta titanium alloy associated with hydrogen absorption.

    AB - Hydrogen embrittlement of a beta titanium orthodontic wire has been examined by means of a delayed-fracture test in acid and neutral fluoride aqueous solutions and hydrogen thermal desorption analysis. The time to fracture increased with decreasing applied stress in 2.0% and 0.2% acidulated phosphate fluoride (APF) solutions. The fracture mode changed from ductile to brittle when the applied stress was lower than 500MPa in 2.0% APF solution. On the other hand, the delayed fracture did not occur within 1000h in neutral NaF solutions, although general corrosion was also observed similar to that in APF solutions. Hydrogen desorption of the delayed-fracture-tested specimens was observed with a peak at approximately 500°C. The amount of absorbed hydrogen was 5000-6500 mass ppm under an applied stress in 2.0% APF solution for 24h. It is concluded that the immersion in fluoride solutions leads to the degradation of the mechanical properties and fracture of beta titanium alloy associated with hydrogen absorption.

    KW - Beta titanium

    KW - Delayed fracture

    KW - Fluoride

    KW - Hydrogen embrittlement

    KW - Orthodontic wire

    KW - TMA

    UR - http://www.scopus.com/inward/record.url?scp=0037400539&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=0037400539&partnerID=8YFLogxK

    U2 - 10.1016/S0142-9612(02)00642-7

    DO - 10.1016/S0142-9612(02)00642-7

    M3 - Article

    C2 - 12628832

    AN - SCOPUS:0037400539

    VL - 24

    SP - 2113

    EP - 2120

    JO - Biomaterials

    JF - Biomaterials

    SN - 0142-9612

    IS - 12

    ER -