Derivation of flotation kinetic model for activated and depressed copper sulfide minerals

Hidekazu Matsuoka, Kohei Mitsuhashi, Masanobu Kawata, Chiharu Tokoro

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)

Abstract

The wettability and floatability of oxidized chalcocite, bornite, and chalcopyrite with the conditions of sodium hydrosulfide (NaHS) dosages and pHs were studied by contact angle measurements, and single and mixture mineral flotation tests. To evaluate the results of the flotation, the flotation kinetic model for copper sulfide minerals treated by NaHS was derived. In this study, we focused on the activation and depression by NaHS, a well-known activator and depressant of copper minerals. The flotation results showed that there can be a threshold NaHS dosage to activate the mineral surfaces, as evidenced by the depression of the minerals and reduction of recoveries at higher dosages of NaHS. Chalcocite recoveries increased with an increase of NaHS dosage. Bornite recoveries tended to be depressed with a smaller amount of NaHS as pH increased. The recoveries of chalcopyrite increased as pH increased at an optimum NaHS dosage. Moreover, the flotation kinetic model that includes the surface properties and the reaction rate constant between the copper sulfide minerals and NaHS was derived. The trends of the flotation rate constants and mass fractions with NaHS dosages and pHs could quantitatively well-explain the flotation results.

Original languageEnglish
Article number1027
Pages (from-to)1-15
Number of pages15
JournalMinerals
Volume10
Issue number11
DOIs
Publication statusPublished - 2020 Nov

Keywords

  • Activation
  • Copper sulfide
  • Depression
  • Flotation
  • Flotation kinetic model

ASJC Scopus subject areas

  • Geotechnical Engineering and Engineering Geology
  • Geology

Fingerprint

Dive into the research topics of 'Derivation of flotation kinetic model for activated and depressed copper sulfide minerals'. Together they form a unique fingerprint.

Cite this