Development and evaluation of an assistive apparatus with pantograph mechanism for standing-up motion of elderly

Yun Ting Liao, Keiichi Muramatsu, Keiichi Watanuki, Eiichiro Tanaka

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Due to the growing elderly population in many developed countries like Japan, assistive devices are increasingly needed to overcome the difficulties of their activities of daily living (ADL). The motion of standing up places a particular burden on the ankle and knee joints and connects static motions (e.g., sitting and lying) and kinetic motions (e.g., walking and climbing up/down the stairs). In our previous research, two types of standing-up assistance apparatuses were introduced according to the suitable standing-up motions. However, these devices are bulky and cannot be widely used in practical settings such as bus terminals. Regarding the suitable standing-up motions of the elderly in the previous literature, a standing-up apparatus with a pantograph mechanism is introduced to diminish the size of the mechanism based on three design principles: (1) the trajectory of the user's COG is an arc; (2) the trajectory of the user's hip joint while standing up is a straight line at an angle of 45 [deg] from the horizon; and (3) the user is supported until the knee angle reaches 60 [deg]. Simulations showed that the load on knee and ankle joint is decreased, and user may stand up easily with our proposed apparatus. A prototype of the apparatus that may be installed on various chairs in public was fabricated. Considering that the apparatus may be used in places without electric power supply, the apparatus is made simply with links and a gas spring instead of electric actuators. Experimental measurements of the trajectories of the center of gravity (COG) and hip joints show that the proposed apparatus may help users to stand in a way that minimizes stress on their lower-body joints.

Original languageEnglish
JournalJournal of Advanced Mechanical Design, Systems and Manufacturing
Volume11
Issue number6
DOIs
Publication statusPublished - 2017 Nov 1

Fingerprint

Pantographs
Trajectories
Gravitation
Bus terminals
Electric actuators
Stairs
Kinetics
Gases

Keywords

  • Activities of daily living
  • Body segment
  • Center of gravity
  • Elderly
  • Gas spring
  • Pantograph mechanism
  • Standing-up assistance

ASJC Scopus subject areas

  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Cite this

Development and evaluation of an assistive apparatus with pantograph mechanism for standing-up motion of elderly. / Liao, Yun Ting; Muramatsu, Keiichi; Watanuki, Keiichi; Tanaka, Eiichiro.

In: Journal of Advanced Mechanical Design, Systems and Manufacturing, Vol. 11, No. 6, 01.11.2017.

Research output: Contribution to journalArticle

@article{b453a3a50af14370b235695f7971794d,
title = "Development and evaluation of an assistive apparatus with pantograph mechanism for standing-up motion of elderly",
abstract = "Due to the growing elderly population in many developed countries like Japan, assistive devices are increasingly needed to overcome the difficulties of their activities of daily living (ADL). The motion of standing up places a particular burden on the ankle and knee joints and connects static motions (e.g., sitting and lying) and kinetic motions (e.g., walking and climbing up/down the stairs). In our previous research, two types of standing-up assistance apparatuses were introduced according to the suitable standing-up motions. However, these devices are bulky and cannot be widely used in practical settings such as bus terminals. Regarding the suitable standing-up motions of the elderly in the previous literature, a standing-up apparatus with a pantograph mechanism is introduced to diminish the size of the mechanism based on three design principles: (1) the trajectory of the user's COG is an arc; (2) the trajectory of the user's hip joint while standing up is a straight line at an angle of 45 [deg] from the horizon; and (3) the user is supported until the knee angle reaches 60 [deg]. Simulations showed that the load on knee and ankle joint is decreased, and user may stand up easily with our proposed apparatus. A prototype of the apparatus that may be installed on various chairs in public was fabricated. Considering that the apparatus may be used in places without electric power supply, the apparatus is made simply with links and a gas spring instead of electric actuators. Experimental measurements of the trajectories of the center of gravity (COG) and hip joints show that the proposed apparatus may help users to stand in a way that minimizes stress on their lower-body joints.",
keywords = "Activities of daily living, Body segment, Center of gravity, Elderly, Gas spring, Pantograph mechanism, Standing-up assistance",
author = "Liao, {Yun Ting} and Keiichi Muramatsu and Keiichi Watanuki and Eiichiro Tanaka",
year = "2017",
month = "11",
day = "1",
doi = "10.1299/jamdsm.2017jamdsm0088",
language = "English",
volume = "11",
journal = "Journal of Advanced Mechanical Design, Systems and Manufacturing",
issn = "1881-3054",
publisher = "Japan Society of Mechanical Engineers",
number = "6",

}

TY - JOUR

T1 - Development and evaluation of an assistive apparatus with pantograph mechanism for standing-up motion of elderly

AU - Liao, Yun Ting

AU - Muramatsu, Keiichi

AU - Watanuki, Keiichi

AU - Tanaka, Eiichiro

PY - 2017/11/1

Y1 - 2017/11/1

N2 - Due to the growing elderly population in many developed countries like Japan, assistive devices are increasingly needed to overcome the difficulties of their activities of daily living (ADL). The motion of standing up places a particular burden on the ankle and knee joints and connects static motions (e.g., sitting and lying) and kinetic motions (e.g., walking and climbing up/down the stairs). In our previous research, two types of standing-up assistance apparatuses were introduced according to the suitable standing-up motions. However, these devices are bulky and cannot be widely used in practical settings such as bus terminals. Regarding the suitable standing-up motions of the elderly in the previous literature, a standing-up apparatus with a pantograph mechanism is introduced to diminish the size of the mechanism based on three design principles: (1) the trajectory of the user's COG is an arc; (2) the trajectory of the user's hip joint while standing up is a straight line at an angle of 45 [deg] from the horizon; and (3) the user is supported until the knee angle reaches 60 [deg]. Simulations showed that the load on knee and ankle joint is decreased, and user may stand up easily with our proposed apparatus. A prototype of the apparatus that may be installed on various chairs in public was fabricated. Considering that the apparatus may be used in places without electric power supply, the apparatus is made simply with links and a gas spring instead of electric actuators. Experimental measurements of the trajectories of the center of gravity (COG) and hip joints show that the proposed apparatus may help users to stand in a way that minimizes stress on their lower-body joints.

AB - Due to the growing elderly population in many developed countries like Japan, assistive devices are increasingly needed to overcome the difficulties of their activities of daily living (ADL). The motion of standing up places a particular burden on the ankle and knee joints and connects static motions (e.g., sitting and lying) and kinetic motions (e.g., walking and climbing up/down the stairs). In our previous research, two types of standing-up assistance apparatuses were introduced according to the suitable standing-up motions. However, these devices are bulky and cannot be widely used in practical settings such as bus terminals. Regarding the suitable standing-up motions of the elderly in the previous literature, a standing-up apparatus with a pantograph mechanism is introduced to diminish the size of the mechanism based on three design principles: (1) the trajectory of the user's COG is an arc; (2) the trajectory of the user's hip joint while standing up is a straight line at an angle of 45 [deg] from the horizon; and (3) the user is supported until the knee angle reaches 60 [deg]. Simulations showed that the load on knee and ankle joint is decreased, and user may stand up easily with our proposed apparatus. A prototype of the apparatus that may be installed on various chairs in public was fabricated. Considering that the apparatus may be used in places without electric power supply, the apparatus is made simply with links and a gas spring instead of electric actuators. Experimental measurements of the trajectories of the center of gravity (COG) and hip joints show that the proposed apparatus may help users to stand in a way that minimizes stress on their lower-body joints.

KW - Activities of daily living

KW - Body segment

KW - Center of gravity

KW - Elderly

KW - Gas spring

KW - Pantograph mechanism

KW - Standing-up assistance

UR - http://www.scopus.com/inward/record.url?scp=85040245298&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85040245298&partnerID=8YFLogxK

U2 - 10.1299/jamdsm.2017jamdsm0088

DO - 10.1299/jamdsm.2017jamdsm0088

M3 - Article

VL - 11

JO - Journal of Advanced Mechanical Design, Systems and Manufacturing

JF - Journal of Advanced Mechanical Design, Systems and Manufacturing

SN - 1881-3054

IS - 6

ER -