Development of 400kN magnetorheological damper for a real base-isolated building

Hideo Fujitani, Hiroshi Sodeyama, Takuya Tomura, Takeshi Hiwatashi, Yoichi Shiozakt, Katsuhiko Hata, Katsuaki Sunakoda, Shin Morishita, Satsuya Soda

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    46 Citations (Scopus)

    Abstract

    A 400kN magnetorheological damper (MR damper) for a real base-isolated building was developed and its dynamic characteristics were verified by experimental tests. The MR damper has 950mm (+/-475mm) stroke and by-pass flow potion. A new type of Magnetorheological fluid is also developed in order to apply to the MR damper. MR fluid had a property of the settlement of particles in dampers. Authors developed a new MR fluid, which keeps the particles in the fluid adequately enough for usual use of MR damper. Analytical model was discussed in this paper. The force by the bingham visco-plastic model was compared with the results of experimental tests. It was found that this analytical model is useful to predict the capacity of the MR damper.

    Original languageEnglish
    Title of host publicationProceedings of SPIE - The International Society for Optical Engineering
    EditorsG.S. Agnes, K-W. Wang
    Pages265-276
    Number of pages12
    Volume5052
    DOIs
    Publication statusPublished - 2003
    EventPROCEEDINGS OF SPIE SPIE - The International Society for Optical Engineering: Smart Structures and Materials 2003 Damping and Isolation - San Diego, CA, United States
    Duration: 2003 Mar 32003 Mar 5

    Other

    OtherPROCEEDINGS OF SPIE SPIE - The International Society for Optical Engineering: Smart Structures and Materials 2003 Damping and Isolation
    CountryUnited States
    CitySan Diego, CA
    Period03/3/303/3/5

    Fingerprint

    dampers
    Fluids
    Analytical models
    Magnetorheological fluids
    fluids
    Plastics
    magnetorheological fluids
    strokes
    dynamic characteristics
    plastics

    Keywords

    • Bingham visco-plastic model
    • Magnetorheological fluid
    • MR damper
    • Real base-isolated building

    ASJC Scopus subject areas

    • Electrical and Electronic Engineering
    • Condensed Matter Physics

    Cite this

    Fujitani, H., Sodeyama, H., Tomura, T., Hiwatashi, T., Shiozakt, Y., Hata, K., ... Soda, S. (2003). Development of 400kN magnetorheological damper for a real base-isolated building. In G. S. Agnes, & K-W. Wang (Eds.), Proceedings of SPIE - The International Society for Optical Engineering (Vol. 5052, pp. 265-276) https://doi.org/10.1117/12.483810

    Development of 400kN magnetorheological damper for a real base-isolated building. / Fujitani, Hideo; Sodeyama, Hiroshi; Tomura, Takuya; Hiwatashi, Takeshi; Shiozakt, Yoichi; Hata, Katsuhiko; Sunakoda, Katsuaki; Morishita, Shin; Soda, Satsuya.

    Proceedings of SPIE - The International Society for Optical Engineering. ed. / G.S. Agnes; K-W. Wang. Vol. 5052 2003. p. 265-276.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Fujitani, H, Sodeyama, H, Tomura, T, Hiwatashi, T, Shiozakt, Y, Hata, K, Sunakoda, K, Morishita, S & Soda, S 2003, Development of 400kN magnetorheological damper for a real base-isolated building. in GS Agnes & K-W Wang (eds), Proceedings of SPIE - The International Society for Optical Engineering. vol. 5052, pp. 265-276, PROCEEDINGS OF SPIE SPIE - The International Society for Optical Engineering: Smart Structures and Materials 2003 Damping and Isolation, San Diego, CA, United States, 03/3/3. https://doi.org/10.1117/12.483810
    Fujitani H, Sodeyama H, Tomura T, Hiwatashi T, Shiozakt Y, Hata K et al. Development of 400kN magnetorheological damper for a real base-isolated building. In Agnes GS, Wang K-W, editors, Proceedings of SPIE - The International Society for Optical Engineering. Vol. 5052. 2003. p. 265-276 https://doi.org/10.1117/12.483810
    Fujitani, Hideo ; Sodeyama, Hiroshi ; Tomura, Takuya ; Hiwatashi, Takeshi ; Shiozakt, Yoichi ; Hata, Katsuhiko ; Sunakoda, Katsuaki ; Morishita, Shin ; Soda, Satsuya. / Development of 400kN magnetorheological damper for a real base-isolated building. Proceedings of SPIE - The International Society for Optical Engineering. editor / G.S. Agnes ; K-W. Wang. Vol. 5052 2003. pp. 265-276
    @inproceedings{0e488d56e51a49058193e3cba7bf5303,
    title = "Development of 400kN magnetorheological damper for a real base-isolated building",
    abstract = "A 400kN magnetorheological damper (MR damper) for a real base-isolated building was developed and its dynamic characteristics were verified by experimental tests. The MR damper has 950mm (+/-475mm) stroke and by-pass flow potion. A new type of Magnetorheological fluid is also developed in order to apply to the MR damper. MR fluid had a property of the settlement of particles in dampers. Authors developed a new MR fluid, which keeps the particles in the fluid adequately enough for usual use of MR damper. Analytical model was discussed in this paper. The force by the bingham visco-plastic model was compared with the results of experimental tests. It was found that this analytical model is useful to predict the capacity of the MR damper.",
    keywords = "Bingham visco-plastic model, Magnetorheological fluid, MR damper, Real base-isolated building",
    author = "Hideo Fujitani and Hiroshi Sodeyama and Takuya Tomura and Takeshi Hiwatashi and Yoichi Shiozakt and Katsuhiko Hata and Katsuaki Sunakoda and Shin Morishita and Satsuya Soda",
    year = "2003",
    doi = "10.1117/12.483810",
    language = "English",
    volume = "5052",
    pages = "265--276",
    editor = "G.S. Agnes and K-W. Wang",
    booktitle = "Proceedings of SPIE - The International Society for Optical Engineering",

    }

    TY - GEN

    T1 - Development of 400kN magnetorheological damper for a real base-isolated building

    AU - Fujitani, Hideo

    AU - Sodeyama, Hiroshi

    AU - Tomura, Takuya

    AU - Hiwatashi, Takeshi

    AU - Shiozakt, Yoichi

    AU - Hata, Katsuhiko

    AU - Sunakoda, Katsuaki

    AU - Morishita, Shin

    AU - Soda, Satsuya

    PY - 2003

    Y1 - 2003

    N2 - A 400kN magnetorheological damper (MR damper) for a real base-isolated building was developed and its dynamic characteristics were verified by experimental tests. The MR damper has 950mm (+/-475mm) stroke and by-pass flow potion. A new type of Magnetorheological fluid is also developed in order to apply to the MR damper. MR fluid had a property of the settlement of particles in dampers. Authors developed a new MR fluid, which keeps the particles in the fluid adequately enough for usual use of MR damper. Analytical model was discussed in this paper. The force by the bingham visco-plastic model was compared with the results of experimental tests. It was found that this analytical model is useful to predict the capacity of the MR damper.

    AB - A 400kN magnetorheological damper (MR damper) for a real base-isolated building was developed and its dynamic characteristics were verified by experimental tests. The MR damper has 950mm (+/-475mm) stroke and by-pass flow potion. A new type of Magnetorheological fluid is also developed in order to apply to the MR damper. MR fluid had a property of the settlement of particles in dampers. Authors developed a new MR fluid, which keeps the particles in the fluid adequately enough for usual use of MR damper. Analytical model was discussed in this paper. The force by the bingham visco-plastic model was compared with the results of experimental tests. It was found that this analytical model is useful to predict the capacity of the MR damper.

    KW - Bingham visco-plastic model

    KW - Magnetorheological fluid

    KW - MR damper

    KW - Real base-isolated building

    UR - http://www.scopus.com/inward/record.url?scp=0242525587&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=0242525587&partnerID=8YFLogxK

    U2 - 10.1117/12.483810

    DO - 10.1117/12.483810

    M3 - Conference contribution

    VL - 5052

    SP - 265

    EP - 276

    BT - Proceedings of SPIE - The International Society for Optical Engineering

    A2 - Agnes, G.S.

    A2 - Wang, K-W.

    ER -