Development of high performance BWR fuel bundle thermal-hydraulic performance of CYCLONE spacer

Shinichi Morooka, Kenetsu Shirakawa, Yasushi Yamamoto, Takashi Yano, Jiro Kimura, Tohru Mitsutake

Research output: Contribution to journalArticle

12 Citations (Scopus)

Abstract

The purpose of this study is to develop a new BWR fuel with high critical power and low pressure drop performance. In this report, the spacer which has a significant effect on thermal hydraulic performance, has been improved and the performance has been measured. The improved high performance spacer is a ferrule type spacer with twisted tape and improved flow tab. This spacer is called CYCLONE spacer. The test bundle consists of electrically heated rods in a 4×4 array configuration. The axial power shape is cosine. Two test assemblies with different radial power distribution have been used. One test assembly has the maximum power rods at the center of the test assembly and the other has the maximum power rods near the channel wall. The results show that the critical power performance of the bundle with CYCLONE spacers is 10 to 22% higher than that of the current bundle with ferrule spacers at BWR rated flow rate, while the pressure drop is about 3% higher at BWR rated conditions (quality 15%).

Original languageEnglish
Pages (from-to)771-775
Number of pages5
JournalNippon Genshiryoku Gakkaishi/Journal of the Atomic Energy Society of Japan
Volume38
Issue number9
Publication statusPublished - 1996 Sep
Externally publishedYes

Fingerprint

Hydraulics
Pressure drop
Tapes
Flow rate
Hot Temperature

Keywords

  • Boiling transition
  • BWR type reactors
  • Critical power
  • Droplet deposition
  • Fuel bundles
  • Performance
  • Pressure drop
  • Spacers
  • Swirl flow

ASJC Scopus subject areas

  • Nuclear Energy and Engineering

Cite this

Development of high performance BWR fuel bundle thermal-hydraulic performance of CYCLONE spacer. / Morooka, Shinichi; Shirakawa, Kenetsu; Yamamoto, Yasushi; Yano, Takashi; Kimura, Jiro; Mitsutake, Tohru.

In: Nippon Genshiryoku Gakkaishi/Journal of the Atomic Energy Society of Japan, Vol. 38, No. 9, 09.1996, p. 771-775.

Research output: Contribution to journalArticle

Morooka, Shinichi ; Shirakawa, Kenetsu ; Yamamoto, Yasushi ; Yano, Takashi ; Kimura, Jiro ; Mitsutake, Tohru. / Development of high performance BWR fuel bundle thermal-hydraulic performance of CYCLONE spacer. In: Nippon Genshiryoku Gakkaishi/Journal of the Atomic Energy Society of Japan. 1996 ; Vol. 38, No. 9. pp. 771-775.
@article{c2ad6038f6a94f8fb40da68b7dbfcb34,
title = "Development of high performance BWR fuel bundle thermal-hydraulic performance of CYCLONE spacer",
abstract = "The purpose of this study is to develop a new BWR fuel with high critical power and low pressure drop performance. In this report, the spacer which has a significant effect on thermal hydraulic performance, has been improved and the performance has been measured. The improved high performance spacer is a ferrule type spacer with twisted tape and improved flow tab. This spacer is called CYCLONE spacer. The test bundle consists of electrically heated rods in a 4×4 array configuration. The axial power shape is cosine. Two test assemblies with different radial power distribution have been used. One test assembly has the maximum power rods at the center of the test assembly and the other has the maximum power rods near the channel wall. The results show that the critical power performance of the bundle with CYCLONE spacers is 10 to 22{\%} higher than that of the current bundle with ferrule spacers at BWR rated flow rate, while the pressure drop is about 3{\%} higher at BWR rated conditions (quality 15{\%}).",
keywords = "Boiling transition, BWR type reactors, Critical power, Droplet deposition, Fuel bundles, Performance, Pressure drop, Spacers, Swirl flow",
author = "Shinichi Morooka and Kenetsu Shirakawa and Yasushi Yamamoto and Takashi Yano and Jiro Kimura and Tohru Mitsutake",
year = "1996",
month = "9",
language = "English",
volume = "38",
pages = "771--775",
journal = "Nippon Genshiryoku Gakkaishi/Journal of the Atomic Energy Society of Japan",
issn = "0004-7120",
publisher = "Atomic Energy Society of Japan",
number = "9",

}

TY - JOUR

T1 - Development of high performance BWR fuel bundle thermal-hydraulic performance of CYCLONE spacer

AU - Morooka, Shinichi

AU - Shirakawa, Kenetsu

AU - Yamamoto, Yasushi

AU - Yano, Takashi

AU - Kimura, Jiro

AU - Mitsutake, Tohru

PY - 1996/9

Y1 - 1996/9

N2 - The purpose of this study is to develop a new BWR fuel with high critical power and low pressure drop performance. In this report, the spacer which has a significant effect on thermal hydraulic performance, has been improved and the performance has been measured. The improved high performance spacer is a ferrule type spacer with twisted tape and improved flow tab. This spacer is called CYCLONE spacer. The test bundle consists of electrically heated rods in a 4×4 array configuration. The axial power shape is cosine. Two test assemblies with different radial power distribution have been used. One test assembly has the maximum power rods at the center of the test assembly and the other has the maximum power rods near the channel wall. The results show that the critical power performance of the bundle with CYCLONE spacers is 10 to 22% higher than that of the current bundle with ferrule spacers at BWR rated flow rate, while the pressure drop is about 3% higher at BWR rated conditions (quality 15%).

AB - The purpose of this study is to develop a new BWR fuel with high critical power and low pressure drop performance. In this report, the spacer which has a significant effect on thermal hydraulic performance, has been improved and the performance has been measured. The improved high performance spacer is a ferrule type spacer with twisted tape and improved flow tab. This spacer is called CYCLONE spacer. The test bundle consists of electrically heated rods in a 4×4 array configuration. The axial power shape is cosine. Two test assemblies with different radial power distribution have been used. One test assembly has the maximum power rods at the center of the test assembly and the other has the maximum power rods near the channel wall. The results show that the critical power performance of the bundle with CYCLONE spacers is 10 to 22% higher than that of the current bundle with ferrule spacers at BWR rated flow rate, while the pressure drop is about 3% higher at BWR rated conditions (quality 15%).

KW - Boiling transition

KW - BWR type reactors

KW - Critical power

KW - Droplet deposition

KW - Fuel bundles

KW - Performance

KW - Pressure drop

KW - Spacers

KW - Swirl flow

UR - http://www.scopus.com/inward/record.url?scp=0030231851&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0030231851&partnerID=8YFLogxK

M3 - Article

VL - 38

SP - 771

EP - 775

JO - Nippon Genshiryoku Gakkaishi/Journal of the Atomic Energy Society of Japan

JF - Nippon Genshiryoku Gakkaishi/Journal of the Atomic Energy Society of Japan

SN - 0004-7120

IS - 9

ER -