Development of the Improving Process for the 3D Printed Structure

Kensuke Takagishi, Shinjiro Umezu

    Research output: Contribution to journalArticle

    20 Citations (Scopus)

    Abstract

    The authors focus on the Fused Deposition Modeling (FDM) 3D printer because the FDM 3D printer can print the utility resin material. It can print with low cost and therefore it is the most suitable for home 3D printer. The FDM 3D printer has the problem that it produces layer grooves on the surface of the 3D printed structure. Therefore the authors developed the 3D-Chemical Melting Finishing (3D-CMF) for removing layer grooves. In this method, a pen-style device is filled with a chemical able to dissolve the materials used for building 3D printed structures. By controlling the behavior of this pen-style device, the convex parts of layer grooves on the surface of the 3D printed structure are dissolved, which, in turn, fills the concave parts. In this study it proves the superiority of the 3D-CMF than conventional processing for the 3D printed structure. It proves utilizing the evaluation of the safety, selectively and stability. It confirms the improving of the 3D-CMF and it is confirmed utilizing the data of the surface roughness precision and the observation of the internal state and the evaluation of the mechanical characteristics.

    Original languageEnglish
    Article number39852
    JournalScientific Reports
    Volume7
    DOIs
    Publication statusPublished - 2017 Jan 5

      Fingerprint

    ASJC Scopus subject areas

    • General

    Cite this