Driving performance of high reduction planetary gear drive with meshing of arc tooth profile gear and pin roller

Kazuteru Nagamura, Takamasa Hirai, Kiyotaka Ikejo, Toshiyuki Koumori, Eiichiro Tanaka, Ichiro Kamimura

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

This paper describes a new type planetary gear drive with the high reduction ratio. The planetary gear drive is mechanically similar to a 2S-C type planetary gear, which has two sun gears and one carrier. The planetary gear drive has two pairs of an arc tooth profile gear and a pin roller, which mesh each other. The planetary gear drive has little backlash, a high efficiency, a long fatigue limit, etc., because the tooth contact holds on concave and convex surfaces. In this study, we measured the vibration acceleration, the transmission error, the gear noise, and the efficiency on the new type planetary gear drive by the running test. We discuss and report the driving performance of the planetary gear drive.

Original languageEnglish
Title of host publication2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007
Pages247-254
Number of pages8
Volume7
DOIs
Publication statusPublished - 2008
Externally publishedYes
Event10th International Power Transmission and Gearing Conference, presented at - 2007 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2007 - Las Vegas, NV, United States
Duration: 2007 Sep 42007 Sep 7

Other

Other10th International Power Transmission and Gearing Conference, presented at - 2007 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2007
CountryUnited States
CityLas Vegas, NV
Period07/9/407/9/7

Fingerprint

Rollers (machine components)
Gear teeth
Meshing
Gears
Arc of a curve
Profile
Fatigue Limit
Convex Surface
Acoustic noise
Sun
Vibrations (mechanical)
Fatigue of materials
High Efficiency
Vibration

ASJC Scopus subject areas

  • Computer Graphics and Computer-Aided Design
  • Computer Science Applications
  • Mechanical Engineering
  • Modelling and Simulation

Cite this

Nagamura, K., Hirai, T., Ikejo, K., Koumori, T., Tanaka, E., & Kamimura, I. (2008). Driving performance of high reduction planetary gear drive with meshing of arc tooth profile gear and pin roller. In 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007 (Vol. 7, pp. 247-254) https://doi.org/10.1115/DETC2007-34245

Driving performance of high reduction planetary gear drive with meshing of arc tooth profile gear and pin roller. / Nagamura, Kazuteru; Hirai, Takamasa; Ikejo, Kiyotaka; Koumori, Toshiyuki; Tanaka, Eiichiro; Kamimura, Ichiro.

2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. Vol. 7 2008. p. 247-254.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nagamura, K, Hirai, T, Ikejo, K, Koumori, T, Tanaka, E & Kamimura, I 2008, Driving performance of high reduction planetary gear drive with meshing of arc tooth profile gear and pin roller. in 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. vol. 7, pp. 247-254, 10th International Power Transmission and Gearing Conference, presented at - 2007 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2007, Las Vegas, NV, United States, 07/9/4. https://doi.org/10.1115/DETC2007-34245
Nagamura K, Hirai T, Ikejo K, Koumori T, Tanaka E, Kamimura I. Driving performance of high reduction planetary gear drive with meshing of arc tooth profile gear and pin roller. In 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. Vol. 7. 2008. p. 247-254 https://doi.org/10.1115/DETC2007-34245
Nagamura, Kazuteru ; Hirai, Takamasa ; Ikejo, Kiyotaka ; Koumori, Toshiyuki ; Tanaka, Eiichiro ; Kamimura, Ichiro. / Driving performance of high reduction planetary gear drive with meshing of arc tooth profile gear and pin roller. 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. Vol. 7 2008. pp. 247-254
@inproceedings{82564085e43c45bb81ab31f1e9a3194d,
title = "Driving performance of high reduction planetary gear drive with meshing of arc tooth profile gear and pin roller",
abstract = "This paper describes a new type planetary gear drive with the high reduction ratio. The planetary gear drive is mechanically similar to a 2S-C type planetary gear, which has two sun gears and one carrier. The planetary gear drive has two pairs of an arc tooth profile gear and a pin roller, which mesh each other. The planetary gear drive has little backlash, a high efficiency, a long fatigue limit, etc., because the tooth contact holds on concave and convex surfaces. In this study, we measured the vibration acceleration, the transmission error, the gear noise, and the efficiency on the new type planetary gear drive by the running test. We discuss and report the driving performance of the planetary gear drive.",
author = "Kazuteru Nagamura and Takamasa Hirai and Kiyotaka Ikejo and Toshiyuki Koumori and Eiichiro Tanaka and Ichiro Kamimura",
year = "2008",
doi = "10.1115/DETC2007-34245",
language = "English",
isbn = "0791848027",
volume = "7",
pages = "247--254",
booktitle = "2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007",

}

TY - GEN

T1 - Driving performance of high reduction planetary gear drive with meshing of arc tooth profile gear and pin roller

AU - Nagamura, Kazuteru

AU - Hirai, Takamasa

AU - Ikejo, Kiyotaka

AU - Koumori, Toshiyuki

AU - Tanaka, Eiichiro

AU - Kamimura, Ichiro

PY - 2008

Y1 - 2008

N2 - This paper describes a new type planetary gear drive with the high reduction ratio. The planetary gear drive is mechanically similar to a 2S-C type planetary gear, which has two sun gears and one carrier. The planetary gear drive has two pairs of an arc tooth profile gear and a pin roller, which mesh each other. The planetary gear drive has little backlash, a high efficiency, a long fatigue limit, etc., because the tooth contact holds on concave and convex surfaces. In this study, we measured the vibration acceleration, the transmission error, the gear noise, and the efficiency on the new type planetary gear drive by the running test. We discuss and report the driving performance of the planetary gear drive.

AB - This paper describes a new type planetary gear drive with the high reduction ratio. The planetary gear drive is mechanically similar to a 2S-C type planetary gear, which has two sun gears and one carrier. The planetary gear drive has two pairs of an arc tooth profile gear and a pin roller, which mesh each other. The planetary gear drive has little backlash, a high efficiency, a long fatigue limit, etc., because the tooth contact holds on concave and convex surfaces. In this study, we measured the vibration acceleration, the transmission error, the gear noise, and the efficiency on the new type planetary gear drive by the running test. We discuss and report the driving performance of the planetary gear drive.

UR - http://www.scopus.com/inward/record.url?scp=44849130729&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=44849130729&partnerID=8YFLogxK

U2 - 10.1115/DETC2007-34245

DO - 10.1115/DETC2007-34245

M3 - Conference contribution

AN - SCOPUS:44849130729

SN - 0791848027

SN - 9780791848029

SN - 0791848086

SN - 9780791848081

VL - 7

SP - 247

EP - 254

BT - 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007

ER -