Effect of acid washing of SiC particles on dispersing and friction properties of Ni-P-SiC composite plating

Norifumi Miyanaga; Shigeaki Minamikawa; Jun Tomioka

doi:10.4028/www.scientific.net/KEM.739.143

Effect of acid washing of SiC particles on dispersing and friction properties of Ni-P-SiC composite plating

Norifumi Miyanaga, Shigeaki Minamikawa, Jun Tomioka

School of Fundamental Science and Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2 Citations (Scopus)

Abstract

This study investigated the effect of acidic solutions used in the washing process of SiC particles on the dispersibility of the particles in a nickel matrix. In addition, the friction behavior of the composite plating was investigated by sliding friction tests. As the results, by washing SiC particles with a HCl solution, the particles appeared in clumps and the rougher surface was created. On the other hand, by a HNO₃ solution, the particles appeared with the homogeneous distribution, and thus the surface deposited was smoother. The Ni-P-SiC composite plating shows the lower friction force especially in the range of the slow sliding speed.

Original language	English
Title of host publication	Engineering Tribology and Materials - ICETAT 2016
Editors	Yunn Lin Hwang, Jeng Haur Horng
Publisher	Trans Tech Publications Ltd
Pages	143-147
Number of pages	5
ISBN (Print)	9783035710762
DOIs	https://doi.org/10.4028/www.scientific.net/KEM.739.143
Publication status	Published - 2017
Event	International Conference on Engineering Tribology and Applied Technology, ICETAT 2016 - Taipei, Taiwan, Province of China Duration: 2016 Nov 4 → 2016 Nov 6

Publication series

Name	Key Engineering Materials
Volume	739 KEM
ISSN (Print)	1013-9826
ISSN (Electronic)	1662-9795

Other

Other	International Conference on Engineering Tribology and Applied Technology, ICETAT 2016
Country/Territory	Taiwan, Province of China
City	Taipei
Period	16/11/4 → 16/11/6

Keywords

Acid washing
Dispersing properties
Friction properties
SiC composite plating

ASJC Scopus subject areas

Materials Science(all)
Mechanics of Materials
Mechanical Engineering

Access to Document

10.4028/www.scientific.net/KEM.739.143

Cite this

Miyanaga, N., Minamikawa, S., & Tomioka, J. (2017). Effect of acid washing of SiC particles on dispersing and friction properties of Ni-P-SiC composite plating. In Y. L. Hwang, & J. H. Horng (Eds.), Engineering Tribology and Materials - ICETAT 2016 (pp. 143-147). (Key Engineering Materials; Vol. 739 KEM). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/KEM.739.143

Effect of acid washing of SiC particles on dispersing and friction properties of Ni-P-SiC composite plating. / Miyanaga, Norifumi; Minamikawa, Shigeaki; Tomioka, Jun.

Engineering Tribology and Materials - ICETAT 2016. ed. / Yunn Lin Hwang; Jeng Haur Horng. Trans Tech Publications Ltd, 2017. p. 143-147 (Key Engineering Materials; Vol. 739 KEM).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Miyanaga, N, Minamikawa, S & Tomioka, J 2017, Effect of acid washing of SiC particles on dispersing and friction properties of Ni-P-SiC composite plating. in YL Hwang & JH Horng (eds), Engineering Tribology and Materials - ICETAT 2016. Key Engineering Materials, vol. 739 KEM, Trans Tech Publications Ltd, pp. 143-147, International Conference on Engineering Tribology and Applied Technology, ICETAT 2016, Taipei, Taiwan, Province of China, 16/11/4. https://doi.org/10.4028/www.scientific.net/KEM.739.143

@inproceedings{2d9f0de114a24043a38cbb37f52f06d0,

title = "Effect of acid washing of SiC particles on dispersing and friction properties of Ni-P-SiC composite plating",

abstract = "This study investigated the effect of acidic solutions used in the washing process of SiC particles on the dispersibility of the particles in a nickel matrix. In addition, the friction behavior of the composite plating was investigated by sliding friction tests. As the results, by washing SiC particles with a HCl solution, the particles appeared in clumps and the rougher surface was created. On the other hand, by a HNO3 solution, the particles appeared with the homogeneous distribution, and thus the surface deposited was smoother. The Ni-P-SiC composite plating shows the lower friction force especially in the range of the slow sliding speed.",

keywords = "Acid washing, Dispersing properties, Friction properties, SiC composite plating",

author = "Norifumi Miyanaga and Shigeaki Minamikawa and Jun Tomioka",

note = "Publisher Copyright: {\textcopyright} 2017 Trans Tech Publications, Switzerland. Copyright: Copyright 2020 Elsevier B.V., All rights reserved.; International Conference on Engineering Tribology and Applied Technology, ICETAT 2016 ; Conference date: 04-11-2016 Through 06-11-2016",

year = "2017",

doi = "10.4028/www.scientific.net/KEM.739.143",

language = "English",

isbn = "9783035710762",

series = "Key Engineering Materials",

publisher = "Trans Tech Publications Ltd",

pages = "143--147",

editor = "Hwang, {Yunn Lin} and Horng, {Jeng Haur}",

booktitle = "Engineering Tribology and Materials - ICETAT 2016",

}

TY - GEN

T1 - Effect of acid washing of SiC particles on dispersing and friction properties of Ni-P-SiC composite plating

AU - Miyanaga, Norifumi

AU - Minamikawa, Shigeaki

AU - Tomioka, Jun

PY - 2017

Y1 - 2017

N2 - This study investigated the effect of acidic solutions used in the washing process of SiC particles on the dispersibility of the particles in a nickel matrix. In addition, the friction behavior of the composite plating was investigated by sliding friction tests. As the results, by washing SiC particles with a HCl solution, the particles appeared in clumps and the rougher surface was created. On the other hand, by a HNO3 solution, the particles appeared with the homogeneous distribution, and thus the surface deposited was smoother. The Ni-P-SiC composite plating shows the lower friction force especially in the range of the slow sliding speed.

AB - This study investigated the effect of acidic solutions used in the washing process of SiC particles on the dispersibility of the particles in a nickel matrix. In addition, the friction behavior of the composite plating was investigated by sliding friction tests. As the results, by washing SiC particles with a HCl solution, the particles appeared in clumps and the rougher surface was created. On the other hand, by a HNO3 solution, the particles appeared with the homogeneous distribution, and thus the surface deposited was smoother. The Ni-P-SiC composite plating shows the lower friction force especially in the range of the slow sliding speed.

KW - Acid washing

KW - Dispersing properties

KW - Friction properties

KW - SiC composite plating

UR - http://www.scopus.com/inward/record.url?scp=85027017775&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85027017775&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/KEM.739.143

DO - 10.4028/www.scientific.net/KEM.739.143

M3 - Conference contribution

AN - SCOPUS:85027017775

SN - 9783035710762

T3 - Key Engineering Materials

SP - 143

EP - 147

BT - Engineering Tribology and Materials - ICETAT 2016

A2 - Hwang, Yunn Lin

A2 - Horng, Jeng Haur

PB - Trans Tech Publications Ltd

T2 - International Conference on Engineering Tribology and Applied Technology, ICETAT 2016

Y2 - 4 November 2016 through 6 November 2016

ER -

Effect of acid washing of SiC particles on dispersing and friction properties of Ni-P-SiC composite plating

Abstract

Publication series

Other

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this