Effect of grain size and nano-particle on fatigue properties for α-iron

Chitoshi Masuda

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Fatigue strength was discussed on α-iron having fine grain size and dispersed nano-particles. The α-iron having fine grain size was fabricated by cast method and hot rolling method, while α-iron having dispersion nano-particles was prepared by powder metallurgy and hot rolling process. The fatigue test was performed by rotating bending fatigue testing machine using the bar type of specimen of 3.5 mm in diameter. Fatigue strength for α-iron having fine grain size was about 300MPa, while for α-iron having dispersion nano-particles the fatigue strength was about 500MPa. Those fatigue data were higher than those of JIS S25C carbon steel normalized and JIS S55C carbon steel tempered at 600°C.

Original languageEnglish
Title of host publicationUltrafine Grained Materials III
EditorsY.T. Zhu, T.G. Langdon, R.Z. Valiev, S. Lee Semiatin, al et al
Pages475-480
Number of pages6
Publication statusPublished - 2004
EventUltrafine Grained Materials III - Charlotte, NC.
Duration: 2004 Mar 142004 Mar 18

Other

OtherUltrafine Grained Materials III
CityCharlotte, NC.
Period04/3/1404/3/18

    Fingerprint

Keywords

  • α-iron
  • Fatigue strength
  • Fine grain
  • Nano-composite dispersed

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Masuda, C. (2004). Effect of grain size and nano-particle on fatigue properties for α-iron. In Y. T. Zhu, T. G. Langdon, R. Z. Valiev, S. Lee Semiatin, & A. et al (Eds.), Ultrafine Grained Materials III (pp. 475-480)