Effect of twisted tape on liquid film flow rate in rod bundle

Miyuki Akiba, Shinichi Morooka, Kenetsu Shirakawa

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

For a boiling water reactor (BWR), high critical-power fuel assemblies are needed to increase the thermal safety margin of the reactor core. There are seven spacers supporting the fuel rods in a BWR fuel assembly, and it is well known that the critical power is affected by the spacer geometry. Studies of spacer geometry are therefore important to the development of high critical-power fuel assemblies. Recently, Morooka et al. reported that a twisted tape increased the critical power. Figure 4 shows the improved spacer which has twisted tapes. The purpose of this study was to clarify the mechanism by which the twisted tape improves critical power by measuring the film flow rate on the fuel rod under air-water conditions. The test data shows that the twisted tape increases the film flow rate in the annular dispersed flow regime. It is thought likely that a swirling flow is generated downstream of the twisted tape and that droplet deposition is promoted by the swirl. We believe this is why the twisted tape increases critical power.

Original languageEnglish
Title of host publicationProceedings of the ASME Fluids Engineering Division Summer Meeting
EditorsT.J. O Hern, T.J. O Hern
Pages437-441
Number of pages5
Volume2
Publication statusPublished - 2003
Externally publishedYes
Event2001 ASME Fluids Engineering Division Summer Meeting - New Orleans, LA
Duration: 2001 May 292001 Jun 1

Other

Other2001 ASME Fluids Engineering Division Summer Meeting
CityNew Orleans, LA
Period01/5/2901/6/1

Fingerprint

Liquid films
Tapes
Flow rate
Boiling water reactors
Swirling flow
Geometry
Reactor cores
Water
Air

ASJC Scopus subject areas

  • Mechanical Engineering
  • Fluid Flow and Transfer Processes

Cite this

Akiba, M., Morooka, S., & Shirakawa, K. (2003). Effect of twisted tape on liquid film flow rate in rod bundle. In T. J. O Hern, & T. J. O Hern (Eds.), Proceedings of the ASME Fluids Engineering Division Summer Meeting (Vol. 2, pp. 437-441)

Effect of twisted tape on liquid film flow rate in rod bundle. / Akiba, Miyuki; Morooka, Shinichi; Shirakawa, Kenetsu.

Proceedings of the ASME Fluids Engineering Division Summer Meeting. ed. / T.J. O Hern; T.J. O Hern. Vol. 2 2003. p. 437-441.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Akiba, M, Morooka, S & Shirakawa, K 2003, Effect of twisted tape on liquid film flow rate in rod bundle. in TJ O Hern & TJ O Hern (eds), Proceedings of the ASME Fluids Engineering Division Summer Meeting. vol. 2, pp. 437-441, 2001 ASME Fluids Engineering Division Summer Meeting, New Orleans, LA, 01/5/29.
Akiba M, Morooka S, Shirakawa K. Effect of twisted tape on liquid film flow rate in rod bundle. In O Hern TJ, O Hern TJ, editors, Proceedings of the ASME Fluids Engineering Division Summer Meeting. Vol. 2. 2003. p. 437-441
Akiba, Miyuki ; Morooka, Shinichi ; Shirakawa, Kenetsu. / Effect of twisted tape on liquid film flow rate in rod bundle. Proceedings of the ASME Fluids Engineering Division Summer Meeting. editor / T.J. O Hern ; T.J. O Hern. Vol. 2 2003. pp. 437-441
@inproceedings{ce1b9d034fc5490ea158d25ef2829413,
title = "Effect of twisted tape on liquid film flow rate in rod bundle",
abstract = "For a boiling water reactor (BWR), high critical-power fuel assemblies are needed to increase the thermal safety margin of the reactor core. There are seven spacers supporting the fuel rods in a BWR fuel assembly, and it is well known that the critical power is affected by the spacer geometry. Studies of spacer geometry are therefore important to the development of high critical-power fuel assemblies. Recently, Morooka et al. reported that a twisted tape increased the critical power. Figure 4 shows the improved spacer which has twisted tapes. The purpose of this study was to clarify the mechanism by which the twisted tape improves critical power by measuring the film flow rate on the fuel rod under air-water conditions. The test data shows that the twisted tape increases the film flow rate in the annular dispersed flow regime. It is thought likely that a swirling flow is generated downstream of the twisted tape and that droplet deposition is promoted by the swirl. We believe this is why the twisted tape increases critical power.",
author = "Miyuki Akiba and Shinichi Morooka and Kenetsu Shirakawa",
year = "2003",
language = "English",
isbn = "0791835324",
volume = "2",
pages = "437--441",
editor = "{O Hern}, T.J. and {O Hern}, T.J.",
booktitle = "Proceedings of the ASME Fluids Engineering Division Summer Meeting",

}

TY - GEN

T1 - Effect of twisted tape on liquid film flow rate in rod bundle

AU - Akiba, Miyuki

AU - Morooka, Shinichi

AU - Shirakawa, Kenetsu

PY - 2003

Y1 - 2003

N2 - For a boiling water reactor (BWR), high critical-power fuel assemblies are needed to increase the thermal safety margin of the reactor core. There are seven spacers supporting the fuel rods in a BWR fuel assembly, and it is well known that the critical power is affected by the spacer geometry. Studies of spacer geometry are therefore important to the development of high critical-power fuel assemblies. Recently, Morooka et al. reported that a twisted tape increased the critical power. Figure 4 shows the improved spacer which has twisted tapes. The purpose of this study was to clarify the mechanism by which the twisted tape improves critical power by measuring the film flow rate on the fuel rod under air-water conditions. The test data shows that the twisted tape increases the film flow rate in the annular dispersed flow regime. It is thought likely that a swirling flow is generated downstream of the twisted tape and that droplet deposition is promoted by the swirl. We believe this is why the twisted tape increases critical power.

AB - For a boiling water reactor (BWR), high critical-power fuel assemblies are needed to increase the thermal safety margin of the reactor core. There are seven spacers supporting the fuel rods in a BWR fuel assembly, and it is well known that the critical power is affected by the spacer geometry. Studies of spacer geometry are therefore important to the development of high critical-power fuel assemblies. Recently, Morooka et al. reported that a twisted tape increased the critical power. Figure 4 shows the improved spacer which has twisted tapes. The purpose of this study was to clarify the mechanism by which the twisted tape improves critical power by measuring the film flow rate on the fuel rod under air-water conditions. The test data shows that the twisted tape increases the film flow rate in the annular dispersed flow regime. It is thought likely that a swirling flow is generated downstream of the twisted tape and that droplet deposition is promoted by the swirl. We believe this is why the twisted tape increases critical power.

UR - http://www.scopus.com/inward/record.url?scp=0347519379&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0347519379&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:0347519379

SN - 0791835324

VL - 2

SP - 437

EP - 441

BT - Proceedings of the ASME Fluids Engineering Division Summer Meeting

A2 - O Hern, T.J.

A2 - O Hern, T.J.

ER -