Efficient CO2 conversion to CO using chemical looping over Co-In oxide

Jun Ichiro Makiura, Sota Kakihara, Takuma Higo, Naoki Ito, Yuichiro Hirano, Yasushi Sekine*

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

Abstract

CO2 conversion to CO by reverse water-gas shift using chemical looping (RWGS-CL) can be conducted at lower temperatures (ca. 723-823 K) than the conventional catalytic RWGS (>973 K), and has been attracting attention as an efficient process for CO production from CO2. In this study, Co-In2O3 was developed as an oxygen storage material (OSM) that can realize an efficient RWGS-CL process. Co-In2O3 showed a high CO2 splitting rate in the mid-temperature range (723-823 K) compared with previously reported materials and had high durability through redox cycles. Importantly, the maximum CO2 conversion in the CO2 splitting step (ca. 80%) was much higher than the equilibrium conversion of catalytic RWGS in the mid-temperature range, indicating that Co-In2O3 is a suitable OSM for the RWGS-CL process.

Original languageEnglish
Pages (from-to)4837-4840
Number of pages4
JournalChemical Communications
Volume58
Issue number31
DOIs
Publication statusPublished - 2022 Mar 17

ASJC Scopus subject areas

  • Catalysis
  • Electronic, Optical and Magnetic Materials
  • Ceramics and Composites
  • Chemistry(all)
  • Surfaces, Coatings and Films
  • Metals and Alloys
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'Efficient CO2 conversion to CO using chemical looping over Co-In oxide'. Together they form a unique fingerprint.

Cite this