EJBot-II: an optimized skid-steering propeller-type climbing robot with transition mechanism

Mohamed G. Alkalla, Mohamed A. Fanni, Abdel− Fattah Mohamed, Shuji Hashimoto, Hideyuki Sawada, Takanobu Miwa, Amr Hamed

Research output: Contribution to journalArticle

Abstract

This paper presents a new kind of climbing robots called EJBot, which has not been restricted to climb certain surface materials or terrains. EJBot is inspired by propeller-based aviation systems, however, its adhesion principle is opposite to flight concept. Thanks to the hybrid actuation system embedded in this robot which gives a good and stable adhesion. This hybrid system consists of propeller thrust forces and wheel torques actuated simultaneously to generate the proper adhesion force. It is similar to a car climbing a ramp, it needs both weight of the car and the wheels' torques. Without these torques, the car will roll down. Consequently, the thrust forces of the propellers increase the traction force capacity, then the wheels' role arises to generate the convenient torques for stopping the robot or navigating it on the structures. The feasibility of this adhesion concept is verified by the first and second modules of EJBot as presented in the simulation and practical results.

Original languageEnglish
Pages (from-to)1042-1059
Number of pages18
JournalAdvanced Robotics
Volume33
Issue number20
DOIs
Publication statusPublished - 2019 Oct 18

Fingerprint

Propellers
Adhesion
Torque
Robots
Wheels
Railroad cars
Hybrid systems
Embedded systems
Aviation

Keywords

  • adhesion forces
  • Climbing robot
  • propeller
  • skid-steering climbing robot (SSCR)
  • traction forces

ASJC Scopus subject areas

  • Software
  • Control and Systems Engineering
  • Human-Computer Interaction
  • Hardware and Architecture
  • Computer Science Applications

Cite this

Alkalla, M. G., Fanni, M. A., Mohamed, A. F., Hashimoto, S., Sawada, H., Miwa, T., & Hamed, A. (2019). EJBot-II: an optimized skid-steering propeller-type climbing robot with transition mechanism. Advanced Robotics, 33(20), 1042-1059. https://doi.org/10.1080/01691864.2019.1657948

EJBot-II : an optimized skid-steering propeller-type climbing robot with transition mechanism. / Alkalla, Mohamed G.; Fanni, Mohamed A.; Mohamed, Abdel− Fattah; Hashimoto, Shuji; Sawada, Hideyuki; Miwa, Takanobu; Hamed, Amr.

In: Advanced Robotics, Vol. 33, No. 20, 18.10.2019, p. 1042-1059.

Research output: Contribution to journalArticle

Alkalla, MG, Fanni, MA, Mohamed, AF, Hashimoto, S, Sawada, H, Miwa, T & Hamed, A 2019, 'EJBot-II: an optimized skid-steering propeller-type climbing robot with transition mechanism', Advanced Robotics, vol. 33, no. 20, pp. 1042-1059. https://doi.org/10.1080/01691864.2019.1657948
Alkalla, Mohamed G. ; Fanni, Mohamed A. ; Mohamed, Abdel− Fattah ; Hashimoto, Shuji ; Sawada, Hideyuki ; Miwa, Takanobu ; Hamed, Amr. / EJBot-II : an optimized skid-steering propeller-type climbing robot with transition mechanism. In: Advanced Robotics. 2019 ; Vol. 33, No. 20. pp. 1042-1059.
@article{5196e34bd98940cfbfbb0ae795cf1e77,
title = "EJBot-II: an optimized skid-steering propeller-type climbing robot with transition mechanism",
abstract = "This paper presents a new kind of climbing robots called EJBot, which has not been restricted to climb certain surface materials or terrains. EJBot is inspired by propeller-based aviation systems, however, its adhesion principle is opposite to flight concept. Thanks to the hybrid actuation system embedded in this robot which gives a good and stable adhesion. This hybrid system consists of propeller thrust forces and wheel torques actuated simultaneously to generate the proper adhesion force. It is similar to a car climbing a ramp, it needs both weight of the car and the wheels' torques. Without these torques, the car will roll down. Consequently, the thrust forces of the propellers increase the traction force capacity, then the wheels' role arises to generate the convenient torques for stopping the robot or navigating it on the structures. The feasibility of this adhesion concept is verified by the first and second modules of EJBot as presented in the simulation and practical results.",
keywords = "adhesion forces, Climbing robot, propeller, skid-steering climbing robot (SSCR), traction forces",
author = "Alkalla, {Mohamed G.} and Fanni, {Mohamed A.} and Mohamed, {Abdel− Fattah} and Shuji Hashimoto and Hideyuki Sawada and Takanobu Miwa and Amr Hamed",
year = "2019",
month = "10",
day = "18",
doi = "10.1080/01691864.2019.1657948",
language = "English",
volume = "33",
pages = "1042--1059",
journal = "Advanced Robotics",
issn = "0169-1864",
publisher = "Taylor and Francis Ltd.",
number = "20",

}

TY - JOUR

T1 - EJBot-II

T2 - an optimized skid-steering propeller-type climbing robot with transition mechanism

AU - Alkalla, Mohamed G.

AU - Fanni, Mohamed A.

AU - Mohamed, Abdel− Fattah

AU - Hashimoto, Shuji

AU - Sawada, Hideyuki

AU - Miwa, Takanobu

AU - Hamed, Amr

PY - 2019/10/18

Y1 - 2019/10/18

N2 - This paper presents a new kind of climbing robots called EJBot, which has not been restricted to climb certain surface materials or terrains. EJBot is inspired by propeller-based aviation systems, however, its adhesion principle is opposite to flight concept. Thanks to the hybrid actuation system embedded in this robot which gives a good and stable adhesion. This hybrid system consists of propeller thrust forces and wheel torques actuated simultaneously to generate the proper adhesion force. It is similar to a car climbing a ramp, it needs both weight of the car and the wheels' torques. Without these torques, the car will roll down. Consequently, the thrust forces of the propellers increase the traction force capacity, then the wheels' role arises to generate the convenient torques for stopping the robot or navigating it on the structures. The feasibility of this adhesion concept is verified by the first and second modules of EJBot as presented in the simulation and practical results.

AB - This paper presents a new kind of climbing robots called EJBot, which has not been restricted to climb certain surface materials or terrains. EJBot is inspired by propeller-based aviation systems, however, its adhesion principle is opposite to flight concept. Thanks to the hybrid actuation system embedded in this robot which gives a good and stable adhesion. This hybrid system consists of propeller thrust forces and wheel torques actuated simultaneously to generate the proper adhesion force. It is similar to a car climbing a ramp, it needs both weight of the car and the wheels' torques. Without these torques, the car will roll down. Consequently, the thrust forces of the propellers increase the traction force capacity, then the wheels' role arises to generate the convenient torques for stopping the robot or navigating it on the structures. The feasibility of this adhesion concept is verified by the first and second modules of EJBot as presented in the simulation and practical results.

KW - adhesion forces

KW - Climbing robot

KW - propeller

KW - skid-steering climbing robot (SSCR)

KW - traction forces

UR - http://www.scopus.com/inward/record.url?scp=85072032823&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85072032823&partnerID=8YFLogxK

U2 - 10.1080/01691864.2019.1657948

DO - 10.1080/01691864.2019.1657948

M3 - Article

AN - SCOPUS:85072032823

VL - 33

SP - 1042

EP - 1059

JO - Advanced Robotics

JF - Advanced Robotics

SN - 0169-1864

IS - 20

ER -