Electrochemical disinfection of marine bacteria attached on a plastic electrode

Satoshi Nakasono, Noriyuki Nakamura, Koji Sode, Tadashi Matsunaga

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

A plastic electrode, which consisted of graphite and silicone rubber, was employed for the electrochemical disinfection of attached marine bacteria, Vibrio alginolyticus. The viability of the bacteria attached on the electrode depended on the applied potential and time. Marine bacteria attached on a basal plane pyrolytic graphite electrode could be disinfected at potentials above 0.8 V vs. a saturated calomel electrode (SCE) applied for 20 min. The bacteria attached on a graphite-silicone electrode were disinfected at 1.0 V vs. SCE and 1.5 V vs. SCE, and 5.6 × 103 cells/cm2 of attached bacteria were disinfected to less than 5% of the initial number at times above 10 min. The residual chlorine concentration was less than the regulated value (0.02 ppm) and the pH value did not change after a potential of 1.5 V vs. SCE was applied to the graphite-silicone electrode for 30 min.

Original languageEnglish
Pages (from-to)191-198
Number of pages8
JournalJournal of Electroanalytical Chemistry
Volume342
Issue number2
DOIs
Publication statusPublished - 1992
Externally publishedYes

Fingerprint

Disinfection
Bacteria
Plastics
Electrodes
Graphite
Silicones
Silicone Elastomers
Graphite electrodes
Chlorine
Rubber
calomel

ASJC Scopus subject areas

  • Analytical Chemistry
  • Chemical Engineering(all)
  • Electrochemistry

Cite this

Electrochemical disinfection of marine bacteria attached on a plastic electrode. / Nakasono, Satoshi; Nakamura, Noriyuki; Sode, Koji; Matsunaga, Tadashi.

In: Journal of Electroanalytical Chemistry, Vol. 342, No. 2, 1992, p. 191-198.

Research output: Contribution to journalArticle

Nakasono, Satoshi ; Nakamura, Noriyuki ; Sode, Koji ; Matsunaga, Tadashi. / Electrochemical disinfection of marine bacteria attached on a plastic electrode. In: Journal of Electroanalytical Chemistry. 1992 ; Vol. 342, No. 2. pp. 191-198.
@article{5a0b32c1331a421d872c7d96557a372d,
title = "Electrochemical disinfection of marine bacteria attached on a plastic electrode",
abstract = "A plastic electrode, which consisted of graphite and silicone rubber, was employed for the electrochemical disinfection of attached marine bacteria, Vibrio alginolyticus. The viability of the bacteria attached on the electrode depended on the applied potential and time. Marine bacteria attached on a basal plane pyrolytic graphite electrode could be disinfected at potentials above 0.8 V vs. a saturated calomel electrode (SCE) applied for 20 min. The bacteria attached on a graphite-silicone electrode were disinfected at 1.0 V vs. SCE and 1.5 V vs. SCE, and 5.6 × 103 cells/cm2 of attached bacteria were disinfected to less than 5{\%} of the initial number at times above 10 min. The residual chlorine concentration was less than the regulated value (0.02 ppm) and the pH value did not change after a potential of 1.5 V vs. SCE was applied to the graphite-silicone electrode for 30 min.",
author = "Satoshi Nakasono and Noriyuki Nakamura and Koji Sode and Tadashi Matsunaga",
year = "1992",
doi = "10.1016/0022-0728(92)85049-9",
language = "English",
volume = "342",
pages = "191--198",
journal = "Journal of Electroanalytical Chemistry",
issn = "0022-0728",
publisher = "Elsevier Sequoia",
number = "2",

}

TY - JOUR

T1 - Electrochemical disinfection of marine bacteria attached on a plastic electrode

AU - Nakasono, Satoshi

AU - Nakamura, Noriyuki

AU - Sode, Koji

AU - Matsunaga, Tadashi

PY - 1992

Y1 - 1992

N2 - A plastic electrode, which consisted of graphite and silicone rubber, was employed for the electrochemical disinfection of attached marine bacteria, Vibrio alginolyticus. The viability of the bacteria attached on the electrode depended on the applied potential and time. Marine bacteria attached on a basal plane pyrolytic graphite electrode could be disinfected at potentials above 0.8 V vs. a saturated calomel electrode (SCE) applied for 20 min. The bacteria attached on a graphite-silicone electrode were disinfected at 1.0 V vs. SCE and 1.5 V vs. SCE, and 5.6 × 103 cells/cm2 of attached bacteria were disinfected to less than 5% of the initial number at times above 10 min. The residual chlorine concentration was less than the regulated value (0.02 ppm) and the pH value did not change after a potential of 1.5 V vs. SCE was applied to the graphite-silicone electrode for 30 min.

AB - A plastic electrode, which consisted of graphite and silicone rubber, was employed for the electrochemical disinfection of attached marine bacteria, Vibrio alginolyticus. The viability of the bacteria attached on the electrode depended on the applied potential and time. Marine bacteria attached on a basal plane pyrolytic graphite electrode could be disinfected at potentials above 0.8 V vs. a saturated calomel electrode (SCE) applied for 20 min. The bacteria attached on a graphite-silicone electrode were disinfected at 1.0 V vs. SCE and 1.5 V vs. SCE, and 5.6 × 103 cells/cm2 of attached bacteria were disinfected to less than 5% of the initial number at times above 10 min. The residual chlorine concentration was less than the regulated value (0.02 ppm) and the pH value did not change after a potential of 1.5 V vs. SCE was applied to the graphite-silicone electrode for 30 min.

UR - http://www.scopus.com/inward/record.url?scp=44049115291&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=44049115291&partnerID=8YFLogxK

U2 - 10.1016/0022-0728(92)85049-9

DO - 10.1016/0022-0728(92)85049-9

M3 - Article

AN - SCOPUS:44049115291

VL - 342

SP - 191

EP - 198

JO - Journal of Electroanalytical Chemistry

JF - Journal of Electroanalytical Chemistry

SN - 0022-0728

IS - 2

ER -