Evaluation method of outgassing from cleanroom material

M. Godo, S. Tanabe

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The evaluation of outgassing emission rate from construction materials is an important technology to control the concentration of VOCs. The measurements of outgassing emission rates from construction materials, such as flooring vinyl sheet, silicone sealant and butyl rubber sealant, were performed using the CR-ADPAC system (Clean Room-ADvanced Pollution and Air quality Chamber system). The CR-ADPAC system is able to control the air velocity on the suface of test piece. It was clarified that the air velocity influenced on the outgassing emission rate and the component of outgassing.

Original languageEnglish
Title of host publicationHB 2006 - Healthy Buildings
Subtitle of host publicationCreating a Healthy Indoor Environment for People, Proceedings
Pages105-108
Number of pages4
Publication statusPublished - 2006 Dec 1
EventHealthy Buildings: Creating a Healthy Indoor Environment for People, HB 2006 - Lisboa, Portugal
Duration: 2006 Jun 42006 Jun 8

Publication series

NameHB 2006 - Healthy Buildings: Creating a Healthy Indoor Environment for People, Proceedings
Volume4

Conference

ConferenceHealthy Buildings: Creating a Healthy Indoor Environment for People, HB 2006
CountryPortugal
CityLisboa
Period06/6/406/6/8

    Fingerprint

Keywords

  • Airborne molecular contaminants
  • Cleanroom
  • Construction material
  • Outgassing

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Building and Construction
  • Health, Toxicology and Mutagenesis

Cite this

Godo, M., & Tanabe, S. (2006). Evaluation method of outgassing from cleanroom material. In HB 2006 - Healthy Buildings: Creating a Healthy Indoor Environment for People, Proceedings (pp. 105-108). (HB 2006 - Healthy Buildings: Creating a Healthy Indoor Environment for People, Proceedings; Vol. 4).