Evaluation of Mode II Fracture Toughness in Glass Cloth/Epoxy Laminates by Rail-Shear Test Method

Hiroyuki Kawada, Ikuhiko Hayashi, Toshio Aoki, Monta Kondoh

Research output: Contribution to journalArticle

Abstract

Rail-shear tests were carried out on the glass cloth/epoxy laminates, and then the mode II fracture toughness value, KIIin, was obtained as the pre-crack length, 2a/W, was altered from 0.2 to 0.45. In addition, the spread of damage was obtained under simulation by the finite element method and then compared with the experimental results. The following results were obtained; (1) In this test method, the recommendable pre-crack length existed in order to obtain the fracture toughness value. (2) The material used in this study was assumed to be a homogeneous anisotropic material of a tetragonal system, and then the finite width correction factor of the specimen geometry was calculated. Consequently, KII in became almost constant in the range of 2a/W=0.25~0.45. (3) The spread of damage was simulated by the finite element method, and it was found that the analytical result agreed with the initial failure process obtained in the experiment. In addition, the JII value was calculated from the path integral, and discussed.

Original languageEnglish
Pages (from-to)683-689
Number of pages7
JournalZairyo/Journal of the Society of Materials Science, Japan
Volume37
Issue number417
DOIs
Publication statusPublished - 1988 Jan 1

Keywords

  • Composite
  • Finite element method
  • Mode II fracture toughness

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Evaluation of Mode II Fracture Toughness in Glass Cloth/Epoxy Laminates by Rail-Shear Test Method'. Together they form a unique fingerprint.

Cite this