Evaluation of ultra high speed micro traction drive

Yasuyoshi Tozaki, Akihiko Umeda, Takeshi Yoshimi, Isamu Shiotsu, Hiroyuki Sonobe, Susumu Matsumoto

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Micro traction drive is a device to transmit driving force modified from angular ball bearing. The micro traction drive consists of an input/inner ring, an outer ring, a rolling element, a retainer/output shaft, and a casing. In addition, the micro traction drive of the tandem type that combined two bearings was developed to obtain a big reduction ratio. As a result, we are able to attain the reduction ratio 7.3. Traction oil on the market was sealed in the test piece for oil bath lubrication. Input shaft could be driven with a motor in ultra high speed. Power absorbing type test equipment was made the efficiency and temperature of micro traction drive operated at high speed were successfully measured. In the result of measurement, temperature rise are a few and it turns out a micro traction drive can be used by ultra hieh-soeed.

Original languageEnglish
Title of host publicationProceedings of the World Tribology Congress III - 2005
Pages215-216
Number of pages2
Publication statusPublished - 2005
Event2005 World Tribology Congress III - Washington, D.C.
Duration: 2005 Sep 122005 Sep 16

Other

Other2005 World Tribology Congress III
CityWashington, D.C.
Period05/9/1205/9/16

ASJC Scopus subject areas

  • Engineering(all)

Fingerprint Dive into the research topics of 'Evaluation of ultra high speed micro traction drive'. Together they form a unique fingerprint.

  • Cite this

    Tozaki, Y., Umeda, A., Yoshimi, T., Shiotsu, I., Sonobe, H., & Matsumoto, S. (2005). Evaluation of ultra high speed micro traction drive. In Proceedings of the World Tribology Congress III - 2005 (pp. 215-216)