Fabrication and evaluation of amperometric sensors for micro flow cell using 3-D comb electrodes

N. Honda, K. Emi, T. Katagiri, S. Kawakami, T. Irita, Shuichi Shoji, H. Sato, Takayuki Homma, Tetsuya Osaka

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Abstract

An efficient electrochemical detector using 3-D comb electrodes was proposed and fabricated by simple micro fabrication technology. The dimensions of fabricated 3-D electrodes were 10 μm in width, 30 μm in height, and 10 μm gap. A prototype of micro flow cell for electrochemical immunoassay using 3-D electrodes was designed and fabricated. The qualitative evaluation of the flow cell for enzyme immunoassay will be discussed.

Original languageEnglish
Title of host publication2002 International Microprocesses and Nanotechnology Conference, MNC 2002
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages290-291
Number of pages2
ISBN (Print)4891140313, 9784891140311
DOIs
Publication statusPublished - 2002
EventInternational Microprocesses and Nanotechnology Conference, MNC 2002 - Tokyo, Japan
Duration: 2002 Nov 62002 Nov 8

Other

OtherInternational Microprocesses and Nanotechnology Conference, MNC 2002
CountryJapan
CityTokyo
Period02/11/602/11/8

    Fingerprint

Keywords

  • 3-D electrode
  • Amperomeric Sensor
  • Comb electrode
  • Electrodeposition
  • Micro Flow Cell

ASJC Scopus subject areas

  • Hardware and Architecture
  • Electrical and Electronic Engineering

Cite this

Honda, N., Emi, K., Katagiri, T., Kawakami, S., Irita, T., Shoji, S., Sato, H., Homma, T., & Osaka, T. (2002). Fabrication and evaluation of amperometric sensors for micro flow cell using 3-D comb electrodes. In 2002 International Microprocesses and Nanotechnology Conference, MNC 2002 (pp. 290-291). [1178657] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/IMNC.2002.1178657