Abstract
The fabrication of c-axis oriented zinc oxide was attempted by electrophoretic deposition (EPD) in a rotating magnetic field. The EPD was conducted in a small container which was placed on a turntable arranged in a superconducting magnet. The suspension was rotated at 0-90 rpm in a 12 T magnetic field during the deposition. The deposits were dried and then sintered at 1400 °C for 2 h. The degree of the c-axis orientation was evaluated by the Lotgering factor calculated from the X-ray diffraction data.
| Original language | English |
|---|---|
| Pages (from-to) | 1171-1175 |
| Number of pages | 5 |
| Journal | Journal of the European Ceramic Society |
| Volume | 30 |
| Issue number | 5 |
| DOIs | |
| Publication status | Published - 2010 Mar 1 |
| Externally published | Yes |
Fingerprint
Keywords
- Magnetic field
- Suspensions
- X-ray methods
- ZnO
ASJC Scopus subject areas
- Ceramics and Composites
- Materials Chemistry
Cite this
Fabrication of c-axis oriented zinc oxide by electrophoretic deposition in a rotating magnetic field. / Uchikoshi, Tetsuo; Suzuki, Tohru; Sakka, Yoshio.
In: Journal of the European Ceramic Society, Vol. 30, No. 5, 01.03.2010, p. 1171-1175.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - Fabrication of c-axis oriented zinc oxide by electrophoretic deposition in a rotating magnetic field
AU - Uchikoshi, Tetsuo
AU - Suzuki, Tohru
AU - Sakka, Yoshio
PY - 2010/3/1
Y1 - 2010/3/1
N2 - The fabrication of c-axis oriented zinc oxide was attempted by electrophoretic deposition (EPD) in a rotating magnetic field. The EPD was conducted in a small container which was placed on a turntable arranged in a superconducting magnet. The suspension was rotated at 0-90 rpm in a 12 T magnetic field during the deposition. The deposits were dried and then sintered at 1400 °C for 2 h. The degree of the c-axis orientation was evaluated by the Lotgering factor calculated from the X-ray diffraction data.
AB - The fabrication of c-axis oriented zinc oxide was attempted by electrophoretic deposition (EPD) in a rotating magnetic field. The EPD was conducted in a small container which was placed on a turntable arranged in a superconducting magnet. The suspension was rotated at 0-90 rpm in a 12 T magnetic field during the deposition. The deposits were dried and then sintered at 1400 °C for 2 h. The degree of the c-axis orientation was evaluated by the Lotgering factor calculated from the X-ray diffraction data.
KW - Magnetic field
KW - Suspensions
KW - X-ray methods
KW - ZnO
UR - http://www.scopus.com/inward/record.url?scp=73949145684&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=73949145684&partnerID=8YFLogxK
U2 - 10.1016/j.jeurceramsoc.2009.06.025
DO - 10.1016/j.jeurceramsoc.2009.06.025
M3 - Article
AN - SCOPUS:73949145684
VL - 30
SP - 1171
EP - 1175
JO - Journal of the European Ceramic Society
JF - Journal of the European Ceramic Society
SN - 0955-2219
IS - 5
ER -