Fabrication of well-ordered indium-tin-oxide film and characterization of organic films vacuum-deposited on it

Tomo Sakanoue, Shuhei Nakatani, Yasukiyo Ueda, Hirokazu Izumi, Tsuguo Ishihara, Muneyuki Motoyama

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Indium-tin-oxide film (ITO) was fabricated, on a (100) surface of an yttria-stabilized zirconia (YSZ) single crystal by pulsed laser deposition. The ITO film was characterized by atomic force microscopy and X-ray diffraction measurements. ITO grew heteroepitaxially on the YSZ substrate. The ITO film surface was extremely flat and roughness in height was less than 1 nm. Two organic dyes, copper phthalocyanine and vanadyltetraphenylporphyrin, were vacuum-deposited on the ITO substrate. Their molecular orientations in thin film were investigated by transmission electron microscopy and electron diffraction analysis.

Original languageEnglish
Pages (from-to)59-66
Number of pages8
JournalMolecular Crystals and Liquid Crystals
Volume405
DOIs
Publication statusPublished - 2003
Externally publishedYes

Fingerprint

Tin oxides
indium oxides
Indium
tin oxides
Oxide films
oxide films
Vacuum
Fabrication
vacuum
fabrication
Yttria stabilized zirconia
yttria-stabilized zirconia
Molecular orientation
Substrates
Pulsed laser deposition
diffraction
Electron diffraction
pulsed laser deposition
Atomic force microscopy
Coloring Agents

Keywords

  • Heteroepitaxy
  • Indium-tin-oxide (ITO)
  • Organic dyes
  • Vacuum-deposition

ASJC Scopus subject areas

  • Condensed Matter Physics

Cite this

Fabrication of well-ordered indium-tin-oxide film and characterization of organic films vacuum-deposited on it. / Sakanoue, Tomo; Nakatani, Shuhei; Ueda, Yasukiyo; Izumi, Hirokazu; Ishihara, Tsuguo; Motoyama, Muneyuki.

In: Molecular Crystals and Liquid Crystals, Vol. 405, 2003, p. 59-66.

Research output: Contribution to journalArticle

Sakanoue, Tomo ; Nakatani, Shuhei ; Ueda, Yasukiyo ; Izumi, Hirokazu ; Ishihara, Tsuguo ; Motoyama, Muneyuki. / Fabrication of well-ordered indium-tin-oxide film and characterization of organic films vacuum-deposited on it. In: Molecular Crystals and Liquid Crystals. 2003 ; Vol. 405. pp. 59-66.
@article{9f6741652a9744f2b5c2f5fdae63e24f,
title = "Fabrication of well-ordered indium-tin-oxide film and characterization of organic films vacuum-deposited on it",
abstract = "Indium-tin-oxide film (ITO) was fabricated, on a (100) surface of an yttria-stabilized zirconia (YSZ) single crystal by pulsed laser deposition. The ITO film was characterized by atomic force microscopy and X-ray diffraction measurements. ITO grew heteroepitaxially on the YSZ substrate. The ITO film surface was extremely flat and roughness in height was less than 1 nm. Two organic dyes, copper phthalocyanine and vanadyltetraphenylporphyrin, were vacuum-deposited on the ITO substrate. Their molecular orientations in thin film were investigated by transmission electron microscopy and electron diffraction analysis.",
keywords = "Heteroepitaxy, Indium-tin-oxide (ITO), Organic dyes, Vacuum-deposition",
author = "Tomo Sakanoue and Shuhei Nakatani and Yasukiyo Ueda and Hirokazu Izumi and Tsuguo Ishihara and Muneyuki Motoyama",
year = "2003",
doi = "10.1080/15421400390263271",
language = "English",
volume = "405",
pages = "59--66",
journal = "Molecular Crystals and Liquid Crystals",
issn = "1542-1406",
publisher = "Taylor and Francis Ltd.",

}

TY - JOUR

T1 - Fabrication of well-ordered indium-tin-oxide film and characterization of organic films vacuum-deposited on it

AU - Sakanoue, Tomo

AU - Nakatani, Shuhei

AU - Ueda, Yasukiyo

AU - Izumi, Hirokazu

AU - Ishihara, Tsuguo

AU - Motoyama, Muneyuki

PY - 2003

Y1 - 2003

N2 - Indium-tin-oxide film (ITO) was fabricated, on a (100) surface of an yttria-stabilized zirconia (YSZ) single crystal by pulsed laser deposition. The ITO film was characterized by atomic force microscopy and X-ray diffraction measurements. ITO grew heteroepitaxially on the YSZ substrate. The ITO film surface was extremely flat and roughness in height was less than 1 nm. Two organic dyes, copper phthalocyanine and vanadyltetraphenylporphyrin, were vacuum-deposited on the ITO substrate. Their molecular orientations in thin film were investigated by transmission electron microscopy and electron diffraction analysis.

AB - Indium-tin-oxide film (ITO) was fabricated, on a (100) surface of an yttria-stabilized zirconia (YSZ) single crystal by pulsed laser deposition. The ITO film was characterized by atomic force microscopy and X-ray diffraction measurements. ITO grew heteroepitaxially on the YSZ substrate. The ITO film surface was extremely flat and roughness in height was less than 1 nm. Two organic dyes, copper phthalocyanine and vanadyltetraphenylporphyrin, were vacuum-deposited on the ITO substrate. Their molecular orientations in thin film were investigated by transmission electron microscopy and electron diffraction analysis.

KW - Heteroepitaxy

KW - Indium-tin-oxide (ITO)

KW - Organic dyes

KW - Vacuum-deposition

UR - http://www.scopus.com/inward/record.url?scp=12844252424&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=12844252424&partnerID=8YFLogxK

U2 - 10.1080/15421400390263271

DO - 10.1080/15421400390263271

M3 - Article

AN - SCOPUS:12844252424

VL - 405

SP - 59

EP - 66

JO - Molecular Crystals and Liquid Crystals

JF - Molecular Crystals and Liquid Crystals

SN - 1542-1406

ER -