Fabrication process of carbonaceous fiber reinforced Al and/or Mg alloy(s) composites by squeeze casting

H. Uozumi, K. Kobayashi, C. Masuda, Makoto Yoshida

    Research output: Contribution to journalArticle

    10 Citations (Scopus)

    Abstract

    Carbonaceous fiber has high strength, high modulus and high thermal conductivity. Preforms were fabricated by suction filtration method. Regardless of fiber type, the buckling strength and elastic modulus of preforms increased with quantity of aluminum borate (AlBO) whisker addition. The carbon nano tube (CNT) preforms were not buckled but only elastically compressed. Carbonaceous fiber reinforced Al, Mg composites were fabricated by squeeze casting. CF+A1B0 hybrid reinforced composites were fabricated with 5% or less deformation. On the other hand, 60% deformation was found in CNT+50A1BO hybrid reinforced composites.

    Original languageEnglish
    Pages (from-to)209-214
    Number of pages6
    JournalAdvanced Materials Research
    Volume15-17
    Publication statusPublished - 2007

    Fingerprint

    Squeeze casting
    Fabrication
    Fibers
    Composite materials
    Carbon
    Buckling
    Thermal conductivity
    Elastic moduli
    Aluminum

    Keywords

    • Aluminum alloy
    • Carbon fiber
    • CNT
    • Composite
    • Magnesium alloy
    • Squeeze casting

    ASJC Scopus subject areas

    • Engineering(all)

    Cite this

    Fabrication process of carbonaceous fiber reinforced Al and/or Mg alloy(s) composites by squeeze casting. / Uozumi, H.; Kobayashi, K.; Masuda, C.; Yoshida, Makoto.

    In: Advanced Materials Research, Vol. 15-17, 2007, p. 209-214.

    Research output: Contribution to journalArticle

    @article{ac8672e384de4068801eae2f9c54fb6b,
    title = "Fabrication process of carbonaceous fiber reinforced Al and/or Mg alloy(s) composites by squeeze casting",
    abstract = "Carbonaceous fiber has high strength, high modulus and high thermal conductivity. Preforms were fabricated by suction filtration method. Regardless of fiber type, the buckling strength and elastic modulus of preforms increased with quantity of aluminum borate (AlBO) whisker addition. The carbon nano tube (CNT) preforms were not buckled but only elastically compressed. Carbonaceous fiber reinforced Al, Mg composites were fabricated by squeeze casting. CF+A1B0 hybrid reinforced composites were fabricated with 5{\%} or less deformation. On the other hand, 60{\%} deformation was found in CNT+50A1BO hybrid reinforced composites.",
    keywords = "Aluminum alloy, Carbon fiber, CNT, Composite, Magnesium alloy, Squeeze casting",
    author = "H. Uozumi and K. Kobayashi and C. Masuda and Makoto Yoshida",
    year = "2007",
    language = "English",
    volume = "15-17",
    pages = "209--214",
    journal = "Advanced Materials Research",
    issn = "1022-6680",
    publisher = "Trans Tech Publications",

    }

    TY - JOUR

    T1 - Fabrication process of carbonaceous fiber reinforced Al and/or Mg alloy(s) composites by squeeze casting

    AU - Uozumi, H.

    AU - Kobayashi, K.

    AU - Masuda, C.

    AU - Yoshida, Makoto

    PY - 2007

    Y1 - 2007

    N2 - Carbonaceous fiber has high strength, high modulus and high thermal conductivity. Preforms were fabricated by suction filtration method. Regardless of fiber type, the buckling strength and elastic modulus of preforms increased with quantity of aluminum borate (AlBO) whisker addition. The carbon nano tube (CNT) preforms were not buckled but only elastically compressed. Carbonaceous fiber reinforced Al, Mg composites were fabricated by squeeze casting. CF+A1B0 hybrid reinforced composites were fabricated with 5% or less deformation. On the other hand, 60% deformation was found in CNT+50A1BO hybrid reinforced composites.

    AB - Carbonaceous fiber has high strength, high modulus and high thermal conductivity. Preforms were fabricated by suction filtration method. Regardless of fiber type, the buckling strength and elastic modulus of preforms increased with quantity of aluminum borate (AlBO) whisker addition. The carbon nano tube (CNT) preforms were not buckled but only elastically compressed. Carbonaceous fiber reinforced Al, Mg composites were fabricated by squeeze casting. CF+A1B0 hybrid reinforced composites were fabricated with 5% or less deformation. On the other hand, 60% deformation was found in CNT+50A1BO hybrid reinforced composites.

    KW - Aluminum alloy

    KW - Carbon fiber

    KW - CNT

    KW - Composite

    KW - Magnesium alloy

    KW - Squeeze casting

    UR - http://www.scopus.com/inward/record.url?scp=34748904941&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=34748904941&partnerID=8YFLogxK

    M3 - Article

    AN - SCOPUS:34748904941

    VL - 15-17

    SP - 209

    EP - 214

    JO - Advanced Materials Research

    JF - Advanced Materials Research

    SN - 1022-6680

    ER -