Fault Detection and Diagnosis in a Continuous Process with Uncertainly Normal Situations

Yoshifumi Tsuge, Kazushi Mori, Shigeyuki Tateno, Hisayoshi Matsuyama

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Fault detection and diagnosis of a continuous process with input fluctuations such as load fluctuations can not be simply performed because of the difficulty of detecting the abnormality in the process, where normal values of state variables are uncertainly time-varying due to input fluctuations. In this study, normal values of output variables are estimated by the auto regressive exogenous model (ARX model). The measured value of an output variable is classified as 5-range signs (+, +?, 0, -?, -) by simultaneously performing two sequential probability ratio tests (SPRTs) based on the error residual between estimated and measured values : one test examines whether it is normal or higher than normal, the other examines whether it is normal or lower than normal. A combination of signs given to all the output variables is called a “pattern,” which is considered to represent an abnormal situation occurring in the process. Then, the fault diagnosis algorithm based on signed directed graph can deduce the fault origin that causes the pattern. The effectiveness of this approach is demonstrated through experiments with a tank-pipeline system.

Original languageEnglish
Pages (from-to)565-572
Number of pages8
JournalKAGAKU KOGAKU RONBUNSHU
Volume21
Issue number3
DOIs
Publication statusPublished - 1995 Jan 1
Externally publishedYes

Keywords

  • Fault Detection
  • Fault Diagnosis
  • Hypothesis Test
  • Process System
  • Signed Directed Graph

ASJC Scopus subject areas

  • Chemistry(all)
  • Chemical Engineering(all)

Fingerprint Dive into the research topics of 'Fault Detection and Diagnosis in a Continuous Process with Uncertainly Normal Situations'. Together they form a unique fingerprint.

  • Cite this