Feasibility study on a 400 kW-3600 rpm REBCO fully superconducting motor

Masataka Iwakuma, Toshiyuki Ogata, Shinichiro Tomoda, Takanobu Kisu, Yutaka Yoshida, Atsushi Ishiyama, Yutaka Yamada, Teruo Izumi, Yuh Shiohara

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

We conceptually designed a 400 kW-3600 rpm synchronous motor with RE 1Ba 2Cu 3O 7-δ (RE: Rare earth, Y, Gd and so on, REBCO) superconducting tapes and studied the feasibility of fully superconducting ones. First the ac loss properties and the dependences of the critical current, I c, on temperature, T, magnetic field, B, and applied magnetic field angle, θ , of the REBCO tapes at 30 K to 77 K were measured. Next, 400 kW-3600 rpm fully superconducting motors were designed by taking into account of I c(B,T,θ) and then their properties, e.g. ac losses, efficiency, torque ripple and so on, were numerically calculated. According to the conventional theories, the induced ac losses in the armature windings exceeded several kW and the efficiency decreased rather than conventional normal motors. On the contrary, by taking account of the tremendous low-ac-loss properties of REBCO superconductors which were recently discovered as magnetic phase transition, the ac losses were reduced to around one hundredth. In consequence a feasible prospect of advantageous REBCO fully superconducting motors was obtained.

Original languageEnglish
Article number5201204
JournalIEEE Transactions on Applied Superconductivity
Volume22
Issue number3
DOIs
Publication statusPublished - 2012 Jun 25

Keywords

  • High-T
  • YBCO
  • motor
  • superconductor

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Feasibility study on a 400 kW-3600 rpm REBCO fully superconducting motor'. Together they form a unique fingerprint.

  • Cite this

    Iwakuma, M., Ogata, T., Tomoda, S., Kisu, T., Yoshida, Y., Ishiyama, A., Yamada, Y., Izumi, T., & Shiohara, Y. (2012). Feasibility study on a 400 kW-3600 rpm REBCO fully superconducting motor. IEEE Transactions on Applied Superconductivity, 22(3), [5201204]. https://doi.org/10.1109/TASC.2011.2177229