Formation of AgGaTe2 films from (Ag2Te+Ga2Te3)/Ag2Te or Ga2Te3/Ag2Te bilayer structures

    Research output: Contribution to journalArticle

    Abstract

    AgGaTe2 is a novel photovoltaic material, and thin films can be prepared by the close spaced sublimation (CSS) method. AgGaTe2 films are formed from two types of bilayer structures, namely (Ag2Te+Ga2Te3)/Ag2Te and Ga2Te3/Ag2Te. The latter structure would exhibit simpler mole ratio controllability for the preparation of the AgGaTe2 film. The characteristics of AgGaTe2 layers formed from the Ga2Te3/Ag2Te bilayer structure and the (Ag2Te+Ga2Te3)/Ag2Te bilayer structure are compared. The formation of AgGaTe2 is confirmed from both structures, and a remarkable difference in the surface morphologies is observed. Control of the source mole ratio between Ga and Te is also shown to be important for the preparation of Ga2Te3 films, because Te vapor leaks from the boat during the sublimation process.

    Original languageEnglish
    Article number115023
    JournalAIP Advances
    Volume8
    Issue number11
    DOIs
    Publication statusPublished - 2018 Nov 1

    ASJC Scopus subject areas

    • Physics and Astronomy(all)

    Fingerprint Dive into the research topics of 'Formation of AgGaTe<sub>2</sub> films from (Ag<sub>2</sub>Te+Ga<sub>2</sub>Te<sub>3</sub>)/Ag<sub>2</sub>Te or Ga<sub>2</sub>Te<sub>3</sub>/Ag<sub>2</sub>Te bilayer structures'. Together they form a unique fingerprint.

  • Cite this