Abstract
Microstructured optical fiber was used as a gas cell in spectroscopic measurements of a low concentration of gas. Proposed technique allowed reducing gas sample volume to 0.01 cc. The gas flow inside core of fiber was simulated and result was confirmed experimentally. During the experimental work several types of fibers of various parameters were specially designed, produced and used. Core diameters ranged from 10.9 μm to 700 μm. Various cutting techniques for fibers such as using the fiber cleaver, Focused Ion Beam and Cross Section Polisher were investigated.
| Original language | English |
|---|---|
| Pages (from-to) | 115-117 |
| Number of pages | 3 |
| Journal | Przeglad Elektrotechniczny |
| Volume | 85 |
| Issue number | 5 |
| Publication status | Published - 2009 |
Fingerprint
Keywords
- Gas concentration sensor
- Microcapillary gas flow
- Microstructured optic fiber
ASJC Scopus subject areas
- Electrical and Electronic Engineering
Cite this
Gas sensor based on microstructured optic fiber. / Pawłat, Joanna; Li, Xuefeng; Tsugiyama, Adashi; Matsuo, Takahiro; Zimin, Yura; Ueda, Toshitsugu.
In: Przeglad Elektrotechniczny, Vol. 85, No. 5, 2009, p. 115-117.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - Gas sensor based on microstructured optic fiber
AU - Pawłat, Joanna
AU - Li, Xuefeng
AU - Tsugiyama, Adashi
AU - Matsuo, Takahiro
AU - Zimin, Yura
AU - Ueda, Toshitsugu
PY - 2009
Y1 - 2009
N2 - Microstructured optical fiber was used as a gas cell in spectroscopic measurements of a low concentration of gas. Proposed technique allowed reducing gas sample volume to 0.01 cc. The gas flow inside core of fiber was simulated and result was confirmed experimentally. During the experimental work several types of fibers of various parameters were specially designed, produced and used. Core diameters ranged from 10.9 μm to 700 μm. Various cutting techniques for fibers such as using the fiber cleaver, Focused Ion Beam and Cross Section Polisher were investigated.
AB - Microstructured optical fiber was used as a gas cell in spectroscopic measurements of a low concentration of gas. Proposed technique allowed reducing gas sample volume to 0.01 cc. The gas flow inside core of fiber was simulated and result was confirmed experimentally. During the experimental work several types of fibers of various parameters were specially designed, produced and used. Core diameters ranged from 10.9 μm to 700 μm. Various cutting techniques for fibers such as using the fiber cleaver, Focused Ion Beam and Cross Section Polisher were investigated.
KW - Gas concentration sensor
KW - Microcapillary gas flow
KW - Microstructured optic fiber
UR - http://www.scopus.com/inward/record.url?scp=67649515082&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=67649515082&partnerID=8YFLogxK
M3 - Article
AN - SCOPUS:67649515082
VL - 85
SP - 115
EP - 117
JO - Przeglad Elektrotechniczny
JF - Przeglad Elektrotechniczny
SN - 0033-2097
IS - 5
ER -