High-speed roll caster for strip casting of aluminum alloy

Toshio Haga, Shinsuke Suzuki

Research output: Chapter in Book/Report/Conference proceedingChapter

1 Citation (Scopus)

Abstract

A melt ejection twin roll caster was devised for high-speed roll casting of aluminum alloy that has sound surfaces. This caster can cast A5182 alloy strip at the speed of up to 120 m/min. The strip surface can be improved by ejecting the melt on the roll. The strip does not stick to the roll because of separating force is very small. Therefore, lubricant is not required in order to prevent the sticking of the strip at the roll. The microstructure of the strip cast using the melt ejection twin roll caster is very fine.

Original languageEnglish
Title of host publicationMaterials Science Forum
PublisherTrans Tech Publ
Volume331
Publication statusPublished - 2000
Externally publishedYes
EventThe 7th International Conference ICCA7 - 'Aluminium Alloys: 'Their Physical and Mechanical Properties' - Charlottesville, VA, USA
Duration: 2000 Apr 92000 Apr 14

Other

OtherThe 7th International Conference ICCA7 - 'Aluminium Alloys: 'Their Physical and Mechanical Properties'
CityCharlottesville, VA, USA
Period00/4/900/4/14

Fingerprint

Aluminum alloys
Casting
Lubricants
Acoustic waves
Microstructure

ASJC Scopus subject areas

  • Materials Science(all)

Cite this

Haga, T., & Suzuki, S. (2000). High-speed roll caster for strip casting of aluminum alloy. In Materials Science Forum (Vol. 331). Trans Tech Publ.

High-speed roll caster for strip casting of aluminum alloy. / Haga, Toshio; Suzuki, Shinsuke.

Materials Science Forum. Vol. 331 Trans Tech Publ, 2000.

Research output: Chapter in Book/Report/Conference proceedingChapter

Haga, T & Suzuki, S 2000, High-speed roll caster for strip casting of aluminum alloy. in Materials Science Forum. vol. 331, Trans Tech Publ, The 7th International Conference ICCA7 - 'Aluminium Alloys: 'Their Physical and Mechanical Properties', Charlottesville, VA, USA, 00/4/9.
Haga T, Suzuki S. High-speed roll caster for strip casting of aluminum alloy. In Materials Science Forum. Vol. 331. Trans Tech Publ. 2000
Haga, Toshio ; Suzuki, Shinsuke. / High-speed roll caster for strip casting of aluminum alloy. Materials Science Forum. Vol. 331 Trans Tech Publ, 2000.
@inbook{50c704f775414f27990ee31f5b7eb06d,
title = "High-speed roll caster for strip casting of aluminum alloy",
abstract = "A melt ejection twin roll caster was devised for high-speed roll casting of aluminum alloy that has sound surfaces. This caster can cast A5182 alloy strip at the speed of up to 120 m/min. The strip surface can be improved by ejecting the melt on the roll. The strip does not stick to the roll because of separating force is very small. Therefore, lubricant is not required in order to prevent the sticking of the strip at the roll. The microstructure of the strip cast using the melt ejection twin roll caster is very fine.",
author = "Toshio Haga and Shinsuke Suzuki",
year = "2000",
language = "English",
volume = "331",
booktitle = "Materials Science Forum",
publisher = "Trans Tech Publ",

}

TY - CHAP

T1 - High-speed roll caster for strip casting of aluminum alloy

AU - Haga, Toshio

AU - Suzuki, Shinsuke

PY - 2000

Y1 - 2000

N2 - A melt ejection twin roll caster was devised for high-speed roll casting of aluminum alloy that has sound surfaces. This caster can cast A5182 alloy strip at the speed of up to 120 m/min. The strip surface can be improved by ejecting the melt on the roll. The strip does not stick to the roll because of separating force is very small. Therefore, lubricant is not required in order to prevent the sticking of the strip at the roll. The microstructure of the strip cast using the melt ejection twin roll caster is very fine.

AB - A melt ejection twin roll caster was devised for high-speed roll casting of aluminum alloy that has sound surfaces. This caster can cast A5182 alloy strip at the speed of up to 120 m/min. The strip surface can be improved by ejecting the melt on the roll. The strip does not stick to the roll because of separating force is very small. Therefore, lubricant is not required in order to prevent the sticking of the strip at the roll. The microstructure of the strip cast using the melt ejection twin roll caster is very fine.

UR - http://www.scopus.com/inward/record.url?scp=1642633490&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=1642633490&partnerID=8YFLogxK

M3 - Chapter

VL - 331

BT - Materials Science Forum

PB - Trans Tech Publ

ER -