Highly reliable and high power 980 nm pump laser diode module for undersea cable systems

Masashi Usami, Yuichi Matsushima, Hideyoshi Horie, Hideaki Kaneda

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

Highly reliable and high power weakly index guided buried-stripe type 980nm pump laser diodes developed for undersea applications are reviewed. The 10,000-hour large scale reliability tests of the first generation LD chips shows that 16.7 FIT for the random failure was confirmed at 10°C with 60% confidence level at 120 mW output power. We also fabricated a FBG locked co-axial type module using a can-sealed LD with a two-lens system, which showed a stable FBG locked mode oscillation at 980 nm under the temperature range from 5°C to 45°C. The 5,000-hour heat cycle test of the modules reveals that the cumulative failure rate after 27 years at 10°C is expected to be 0.023%. These first generation LD modules were employed in the transoceanic commercial systems such as Pacific Crossing-1 and the Japan-US cable system projects. We have also succeeded in developing the 980 nm LD for higher output operation with optimizing waveguide design. The 1000μm long LD showed CW kink-free operation up to 545mW optical output and a maximum output power of over 650 mW, which was limited by thermal rollover. In addition, a preliminary aging test at 350 mW optical output power at 50°C has shown stable operation up to 2,300 h. We also confirmed 300 mW kink-free fiber output power with a co-axial type module with the improved coupling efficiency of approximately 78%. These figures are the highest reported operation levels for 980-nm co-axial type modules.

Original languageEnglish
Pages (from-to)639-647
Number of pages9
JournalIEICE Transactions on Electronics
VolumeE84-C
Issue number5
Publication statusPublished - 2001 May
Externally publishedYes

Fingerprint

Semiconductor lasers
Cables
Pumps
Lenses
Waveguides
Aging of materials
Fibers
Temperature
Hot Temperature

Keywords

  • 980-nm pump laser
  • EDFA
  • Reliability
  • Undersea system
  • WDM

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Usami, M., Matsushima, Y., Horie, H., & Kaneda, H. (2001). Highly reliable and high power 980 nm pump laser diode module for undersea cable systems. IEICE Transactions on Electronics, E84-C(5), 639-647.

Highly reliable and high power 980 nm pump laser diode module for undersea cable systems. / Usami, Masashi; Matsushima, Yuichi; Horie, Hideyoshi; Kaneda, Hideaki.

In: IEICE Transactions on Electronics, Vol. E84-C, No. 5, 05.2001, p. 639-647.

Research output: Contribution to journalArticle

Usami, M, Matsushima, Y, Horie, H & Kaneda, H 2001, 'Highly reliable and high power 980 nm pump laser diode module for undersea cable systems', IEICE Transactions on Electronics, vol. E84-C, no. 5, pp. 639-647.
Usami, Masashi ; Matsushima, Yuichi ; Horie, Hideyoshi ; Kaneda, Hideaki. / Highly reliable and high power 980 nm pump laser diode module for undersea cable systems. In: IEICE Transactions on Electronics. 2001 ; Vol. E84-C, No. 5. pp. 639-647.
@article{212ebb8da3d64c96af7dbadf6d5e293b,
title = "Highly reliable and high power 980 nm pump laser diode module for undersea cable systems",
abstract = "Highly reliable and high power weakly index guided buried-stripe type 980nm pump laser diodes developed for undersea applications are reviewed. The 10,000-hour large scale reliability tests of the first generation LD chips shows that 16.7 FIT for the random failure was confirmed at 10°C with 60{\%} confidence level at 120 mW output power. We also fabricated a FBG locked co-axial type module using a can-sealed LD with a two-lens system, which showed a stable FBG locked mode oscillation at 980 nm under the temperature range from 5°C to 45°C. The 5,000-hour heat cycle test of the modules reveals that the cumulative failure rate after 27 years at 10°C is expected to be 0.023{\%}. These first generation LD modules were employed in the transoceanic commercial systems such as Pacific Crossing-1 and the Japan-US cable system projects. We have also succeeded in developing the 980 nm LD for higher output operation with optimizing waveguide design. The 1000μm long LD showed CW kink-free operation up to 545mW optical output and a maximum output power of over 650 mW, which was limited by thermal rollover. In addition, a preliminary aging test at 350 mW optical output power at 50°C has shown stable operation up to 2,300 h. We also confirmed 300 mW kink-free fiber output power with a co-axial type module with the improved coupling efficiency of approximately 78{\%}. These figures are the highest reported operation levels for 980-nm co-axial type modules.",
keywords = "980-nm pump laser, EDFA, Reliability, Undersea system, WDM",
author = "Masashi Usami and Yuichi Matsushima and Hideyoshi Horie and Hideaki Kaneda",
year = "2001",
month = "5",
language = "English",
volume = "E84-C",
pages = "639--647",
journal = "IEICE Transactions on Electronics",
issn = "0916-8524",
publisher = "Maruzen Co., Ltd/Maruzen Kabushikikaisha",
number = "5",

}

TY - JOUR

T1 - Highly reliable and high power 980 nm pump laser diode module for undersea cable systems

AU - Usami, Masashi

AU - Matsushima, Yuichi

AU - Horie, Hideyoshi

AU - Kaneda, Hideaki

PY - 2001/5

Y1 - 2001/5

N2 - Highly reliable and high power weakly index guided buried-stripe type 980nm pump laser diodes developed for undersea applications are reviewed. The 10,000-hour large scale reliability tests of the first generation LD chips shows that 16.7 FIT for the random failure was confirmed at 10°C with 60% confidence level at 120 mW output power. We also fabricated a FBG locked co-axial type module using a can-sealed LD with a two-lens system, which showed a stable FBG locked mode oscillation at 980 nm under the temperature range from 5°C to 45°C. The 5,000-hour heat cycle test of the modules reveals that the cumulative failure rate after 27 years at 10°C is expected to be 0.023%. These first generation LD modules were employed in the transoceanic commercial systems such as Pacific Crossing-1 and the Japan-US cable system projects. We have also succeeded in developing the 980 nm LD for higher output operation with optimizing waveguide design. The 1000μm long LD showed CW kink-free operation up to 545mW optical output and a maximum output power of over 650 mW, which was limited by thermal rollover. In addition, a preliminary aging test at 350 mW optical output power at 50°C has shown stable operation up to 2,300 h. We also confirmed 300 mW kink-free fiber output power with a co-axial type module with the improved coupling efficiency of approximately 78%. These figures are the highest reported operation levels for 980-nm co-axial type modules.

AB - Highly reliable and high power weakly index guided buried-stripe type 980nm pump laser diodes developed for undersea applications are reviewed. The 10,000-hour large scale reliability tests of the first generation LD chips shows that 16.7 FIT for the random failure was confirmed at 10°C with 60% confidence level at 120 mW output power. We also fabricated a FBG locked co-axial type module using a can-sealed LD with a two-lens system, which showed a stable FBG locked mode oscillation at 980 nm under the temperature range from 5°C to 45°C. The 5,000-hour heat cycle test of the modules reveals that the cumulative failure rate after 27 years at 10°C is expected to be 0.023%. These first generation LD modules were employed in the transoceanic commercial systems such as Pacific Crossing-1 and the Japan-US cable system projects. We have also succeeded in developing the 980 nm LD for higher output operation with optimizing waveguide design. The 1000μm long LD showed CW kink-free operation up to 545mW optical output and a maximum output power of over 650 mW, which was limited by thermal rollover. In addition, a preliminary aging test at 350 mW optical output power at 50°C has shown stable operation up to 2,300 h. We also confirmed 300 mW kink-free fiber output power with a co-axial type module with the improved coupling efficiency of approximately 78%. These figures are the highest reported operation levels for 980-nm co-axial type modules.

KW - 980-nm pump laser

KW - EDFA

KW - Reliability

KW - Undersea system

KW - WDM

UR - http://www.scopus.com/inward/record.url?scp=0035336196&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0035336196&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0035336196

VL - E84-C

SP - 639

EP - 647

JO - IEICE Transactions on Electronics

JF - IEICE Transactions on Electronics

SN - 0916-8524

IS - 5

ER -