Hydrogen production from ethanol using low energy pulse discharge at ambient temperature

Sekine Yasushi, Matsukata Masahiko, Eiichi Kikuchi, Shigeru Kado, Fumihiro Haga V

Research output: Contribution to journalConference article

Abstract

The steam reforming of ethanol at room temperature and 1 atm was studied using low energy pulse (LEP) discharge. Characteristic novel reformer, wherein one electrode was made of carbon fibers (7 fým OD) bundle, was employed. When using this reformer, the fuel was evaporated by heat emission from electrode, and then the vaporized reactants were reacted. Produced gaseous compounds were collected from upper part of the reactor, H2 and other compounds (CO, CH4, CO2, C2H4, and C2H6) were produced, and the formation rates were increased in proportion to the increase of the gap distance and input power. The energy efficiency has reached 41.7% at the ethanol concentration of 50%, the discharge gap of 3 mm. This is an abstract of a paper presented at the 228th ACS National Meeting (Philadelphia, PA, 8/22-26/2004).

Original languageEnglish
Pages (from-to)FUEL-201
JournalACS National Meeting Book of Abstracts
Volume228
Issue number1
Publication statusPublished - 2004 Oct 20
EventAbstracts of Papers - 228th ACS National Meeting - Philadelphia, PA, United States
Duration: 2004 Aug 222004 Aug 26

ASJC Scopus subject areas

  • Chemistry(all)
  • Chemical Engineering(all)

Fingerprint Dive into the research topics of 'Hydrogen production from ethanol using low energy pulse discharge at ambient temperature'. Together they form a unique fingerprint.

  • Cite this