In-plane anisotropy in batch-produced Langmuir-Blodgett films

Side-by-side and face-to-face arrays

Yuka Tabe, Keiichi Ikegami, Shin Ichi Kuroda, Kazuhiro Saito, Mitsuyoshi Saito, Michio Sugi

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

In-plane anisotropy of Langmuir-Blodgett (LB) films is affected by the arrangement of substrates when many samples are batch produced in one single trough. We examined the dichroic behavior for two different cases of the batch production. In the case of substrates aligned side by side, the dichroic behavior is similar to that in the single-substrate production and agrees with the flow orientation model. In the face-to-face case, however, the tendency is quite different from both the single-substrate production and the side-by-side case, clearly deviating from the theoretical predictions. This discrepancy is suggested to be due to a dead water area which should be formed around the stagnation point.

Original languageEnglish
Pages (from-to)1191-1193
Number of pages3
JournalApplied Physics Letters
Volume57
Issue number12
DOIs
Publication statusPublished - 1990
Externally publishedYes

Fingerprint

Langmuir-Blodgett films
anisotropy
stagnation point
troughs
tendencies
predictions
water

ASJC Scopus subject areas

  • Physics and Astronomy (miscellaneous)

Cite this

In-plane anisotropy in batch-produced Langmuir-Blodgett films : Side-by-side and face-to-face arrays. / Tabe, Yuka; Ikegami, Keiichi; Kuroda, Shin Ichi; Saito, Kazuhiro; Saito, Mitsuyoshi; Sugi, Michio.

In: Applied Physics Letters, Vol. 57, No. 12, 1990, p. 1191-1193.

Research output: Contribution to journalArticle

Tabe, Yuka ; Ikegami, Keiichi ; Kuroda, Shin Ichi ; Saito, Kazuhiro ; Saito, Mitsuyoshi ; Sugi, Michio. / In-plane anisotropy in batch-produced Langmuir-Blodgett films : Side-by-side and face-to-face arrays. In: Applied Physics Letters. 1990 ; Vol. 57, No. 12. pp. 1191-1193.
@article{d3b64e47606f44479f19522858e5c9f0,
title = "In-plane anisotropy in batch-produced Langmuir-Blodgett films: Side-by-side and face-to-face arrays",
abstract = "In-plane anisotropy of Langmuir-Blodgett (LB) films is affected by the arrangement of substrates when many samples are batch produced in one single trough. We examined the dichroic behavior for two different cases of the batch production. In the case of substrates aligned side by side, the dichroic behavior is similar to that in the single-substrate production and agrees with the flow orientation model. In the face-to-face case, however, the tendency is quite different from both the single-substrate production and the side-by-side case, clearly deviating from the theoretical predictions. This discrepancy is suggested to be due to a dead water area which should be formed around the stagnation point.",
author = "Yuka Tabe and Keiichi Ikegami and Kuroda, {Shin Ichi} and Kazuhiro Saito and Mitsuyoshi Saito and Michio Sugi",
year = "1990",
doi = "10.1063/1.103483",
language = "English",
volume = "57",
pages = "1191--1193",
journal = "Applied Physics Letters",
issn = "0003-6951",
publisher = "American Institute of Physics Publising LLC",
number = "12",

}

TY - JOUR

T1 - In-plane anisotropy in batch-produced Langmuir-Blodgett films

T2 - Side-by-side and face-to-face arrays

AU - Tabe, Yuka

AU - Ikegami, Keiichi

AU - Kuroda, Shin Ichi

AU - Saito, Kazuhiro

AU - Saito, Mitsuyoshi

AU - Sugi, Michio

PY - 1990

Y1 - 1990

N2 - In-plane anisotropy of Langmuir-Blodgett (LB) films is affected by the arrangement of substrates when many samples are batch produced in one single trough. We examined the dichroic behavior for two different cases of the batch production. In the case of substrates aligned side by side, the dichroic behavior is similar to that in the single-substrate production and agrees with the flow orientation model. In the face-to-face case, however, the tendency is quite different from both the single-substrate production and the side-by-side case, clearly deviating from the theoretical predictions. This discrepancy is suggested to be due to a dead water area which should be formed around the stagnation point.

AB - In-plane anisotropy of Langmuir-Blodgett (LB) films is affected by the arrangement of substrates when many samples are batch produced in one single trough. We examined the dichroic behavior for two different cases of the batch production. In the case of substrates aligned side by side, the dichroic behavior is similar to that in the single-substrate production and agrees with the flow orientation model. In the face-to-face case, however, the tendency is quite different from both the single-substrate production and the side-by-side case, clearly deviating from the theoretical predictions. This discrepancy is suggested to be due to a dead water area which should be formed around the stagnation point.

UR - http://www.scopus.com/inward/record.url?scp=36549098803&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=36549098803&partnerID=8YFLogxK

U2 - 10.1063/1.103483

DO - 10.1063/1.103483

M3 - Article

VL - 57

SP - 1191

EP - 1193

JO - Applied Physics Letters

JF - Applied Physics Letters

SN - 0003-6951

IS - 12

ER -