Investigation of mechanical load on proximal left anterior descending of coronary artery

Tadashi Yamamoto, Kiyotaka Iwasaki, Jun Arai, Katsumi Ohori, Mitsuo Umezu

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)

    Abstract

    It is clinically recognized that percutaneous coronary intervention (PCI) treatment for proximal left anterior descending (LAD) artery disease is resulting in less satisfactory in comparison with other lesions. However, the reason has not yet clarified. The purpose of this study is to investigate the mechanical loading conditions in proximal LAD artery. This study hypothesized that the coronary artery is prestretched in the heart. In order to investigate the pre-stretched value, porcine heart was obtained from a local slauterhouse. Two points were marked at coronary artery and its distance was measured. Two-dimensional distances (L1) between the dots marked on vessel centerline were measured with digital microscope. The coronary artery was separated from the heart, the distance between the points was measured again (L2). Pre-stretched ratio was calculated as (L1-L2)/L2 ×100%. 101 consecutive patients of coronary CT were taken in Hokkaido Cardiovascular Hospital from September 2012 in order to investigate dynamic loads acting on coronary artery. The distance of proximal LAD artery was measured in diastolic phase (Ld) and systolic phase (Ls) from a stretch view taken from CT. Shortening ratio was defined as (Ld-Ls)/Ld ×100%. The twist angle was defined as a sum of the following two angles and mesured in end-systolic and end-diastolic phase. One is tha angle between the line connecting the centers of LAD and left circumflex (LCX), and the perpendicular line toward abdominal to dorsal. The other is the angle between the line connecting the centers of LAD and the first septal branch, and the perpendicular line. Twisting ratio was calculated as θ/Ld ×100%.Results showed that the pre-stretched ratio was calculated to be 7.6±2.9% (mean±SD) in porcine LAD artery. The length of proximal LAD artery of human coronary artery was 26.6 ± 9.3mm (mean±SD). Shortening ratio was calculated to be 6.1 ± 6.2% (mean±SD). And the mean twisting ratio was calculated to be 0.6 °/mm. This study revealed the pre-stretched value of proximal LAD artery due to restrain from the myocardium. Moreover shortening and twisting motions in proximal LAD artery were quantified.

    Original languageEnglish
    Title of host publicationIFMBE Proceedings
    PublisherSpringer Verlag
    Pages805-808
    Number of pages4
    Volume43
    ISBN (Print)9783319029122
    DOIs
    Publication statusPublished - 2014
    Event15th International Conference on Biomedical Engineering, ICBME 2013 - Singapore, Singapore
    Duration: 2013 Dec 42013 Dec 7

    Other

    Other15th International Conference on Biomedical Engineering, ICBME 2013
    CountrySingapore
    CitySingapore
    Period13/12/413/12/7

    Fingerprint

    Dynamic loads
    Microscopes

    Keywords

    • Coronary artery
    • Percutaneous coronary intervention
    • Stent

    ASJC Scopus subject areas

    • Biomedical Engineering
    • Bioengineering

    Cite this

    Yamamoto, T., Iwasaki, K., Arai, J., Ohori, K., & Umezu, M. (2014). Investigation of mechanical load on proximal left anterior descending of coronary artery. In IFMBE Proceedings (Vol. 43, pp. 805-808). Springer Verlag. https://doi.org/10.1007/978-3-319-02913-9_207

    Investigation of mechanical load on proximal left anterior descending of coronary artery. / Yamamoto, Tadashi; Iwasaki, Kiyotaka; Arai, Jun; Ohori, Katsumi; Umezu, Mitsuo.

    IFMBE Proceedings. Vol. 43 Springer Verlag, 2014. p. 805-808.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Yamamoto, T, Iwasaki, K, Arai, J, Ohori, K & Umezu, M 2014, Investigation of mechanical load on proximal left anterior descending of coronary artery. in IFMBE Proceedings. vol. 43, Springer Verlag, pp. 805-808, 15th International Conference on Biomedical Engineering, ICBME 2013, Singapore, Singapore, 13/12/4. https://doi.org/10.1007/978-3-319-02913-9_207
    Yamamoto, Tadashi ; Iwasaki, Kiyotaka ; Arai, Jun ; Ohori, Katsumi ; Umezu, Mitsuo. / Investigation of mechanical load on proximal left anterior descending of coronary artery. IFMBE Proceedings. Vol. 43 Springer Verlag, 2014. pp. 805-808
    @inproceedings{584cf3c9e7564afbafd9a215721c68c7,
    title = "Investigation of mechanical load on proximal left anterior descending of coronary artery",
    abstract = "It is clinically recognized that percutaneous coronary intervention (PCI) treatment for proximal left anterior descending (LAD) artery disease is resulting in less satisfactory in comparison with other lesions. However, the reason has not yet clarified. The purpose of this study is to investigate the mechanical loading conditions in proximal LAD artery. This study hypothesized that the coronary artery is prestretched in the heart. In order to investigate the pre-stretched value, porcine heart was obtained from a local slauterhouse. Two points were marked at coronary artery and its distance was measured. Two-dimensional distances (L1) between the dots marked on vessel centerline were measured with digital microscope. The coronary artery was separated from the heart, the distance between the points was measured again (L2). Pre-stretched ratio was calculated as (L1-L2)/L2 ×100{\%}. 101 consecutive patients of coronary CT were taken in Hokkaido Cardiovascular Hospital from September 2012 in order to investigate dynamic loads acting on coronary artery. The distance of proximal LAD artery was measured in diastolic phase (Ld) and systolic phase (Ls) from a stretch view taken from CT. Shortening ratio was defined as (Ld-Ls)/Ld ×100{\%}. The twist angle was defined as a sum of the following two angles and mesured in end-systolic and end-diastolic phase. One is tha angle between the line connecting the centers of LAD and left circumflex (LCX), and the perpendicular line toward abdominal to dorsal. The other is the angle between the line connecting the centers of LAD and the first septal branch, and the perpendicular line. Twisting ratio was calculated as θ/Ld ×100{\%}.Results showed that the pre-stretched ratio was calculated to be 7.6±2.9{\%} (mean±SD) in porcine LAD artery. The length of proximal LAD artery of human coronary artery was 26.6 ± 9.3mm (mean±SD). Shortening ratio was calculated to be 6.1 ± 6.2{\%} (mean±SD). And the mean twisting ratio was calculated to be 0.6 °/mm. This study revealed the pre-stretched value of proximal LAD artery due to restrain from the myocardium. Moreover shortening and twisting motions in proximal LAD artery were quantified.",
    keywords = "Coronary artery, Percutaneous coronary intervention, Stent",
    author = "Tadashi Yamamoto and Kiyotaka Iwasaki and Jun Arai and Katsumi Ohori and Mitsuo Umezu",
    year = "2014",
    doi = "10.1007/978-3-319-02913-9_207",
    language = "English",
    isbn = "9783319029122",
    volume = "43",
    pages = "805--808",
    booktitle = "IFMBE Proceedings",
    publisher = "Springer Verlag",

    }

    TY - GEN

    T1 - Investigation of mechanical load on proximal left anterior descending of coronary artery

    AU - Yamamoto, Tadashi

    AU - Iwasaki, Kiyotaka

    AU - Arai, Jun

    AU - Ohori, Katsumi

    AU - Umezu, Mitsuo

    PY - 2014

    Y1 - 2014

    N2 - It is clinically recognized that percutaneous coronary intervention (PCI) treatment for proximal left anterior descending (LAD) artery disease is resulting in less satisfactory in comparison with other lesions. However, the reason has not yet clarified. The purpose of this study is to investigate the mechanical loading conditions in proximal LAD artery. This study hypothesized that the coronary artery is prestretched in the heart. In order to investigate the pre-stretched value, porcine heart was obtained from a local slauterhouse. Two points were marked at coronary artery and its distance was measured. Two-dimensional distances (L1) between the dots marked on vessel centerline were measured with digital microscope. The coronary artery was separated from the heart, the distance between the points was measured again (L2). Pre-stretched ratio was calculated as (L1-L2)/L2 ×100%. 101 consecutive patients of coronary CT were taken in Hokkaido Cardiovascular Hospital from September 2012 in order to investigate dynamic loads acting on coronary artery. The distance of proximal LAD artery was measured in diastolic phase (Ld) and systolic phase (Ls) from a stretch view taken from CT. Shortening ratio was defined as (Ld-Ls)/Ld ×100%. The twist angle was defined as a sum of the following two angles and mesured in end-systolic and end-diastolic phase. One is tha angle between the line connecting the centers of LAD and left circumflex (LCX), and the perpendicular line toward abdominal to dorsal. The other is the angle between the line connecting the centers of LAD and the first septal branch, and the perpendicular line. Twisting ratio was calculated as θ/Ld ×100%.Results showed that the pre-stretched ratio was calculated to be 7.6±2.9% (mean±SD) in porcine LAD artery. The length of proximal LAD artery of human coronary artery was 26.6 ± 9.3mm (mean±SD). Shortening ratio was calculated to be 6.1 ± 6.2% (mean±SD). And the mean twisting ratio was calculated to be 0.6 °/mm. This study revealed the pre-stretched value of proximal LAD artery due to restrain from the myocardium. Moreover shortening and twisting motions in proximal LAD artery were quantified.

    AB - It is clinically recognized that percutaneous coronary intervention (PCI) treatment for proximal left anterior descending (LAD) artery disease is resulting in less satisfactory in comparison with other lesions. However, the reason has not yet clarified. The purpose of this study is to investigate the mechanical loading conditions in proximal LAD artery. This study hypothesized that the coronary artery is prestretched in the heart. In order to investigate the pre-stretched value, porcine heart was obtained from a local slauterhouse. Two points were marked at coronary artery and its distance was measured. Two-dimensional distances (L1) between the dots marked on vessel centerline were measured with digital microscope. The coronary artery was separated from the heart, the distance between the points was measured again (L2). Pre-stretched ratio was calculated as (L1-L2)/L2 ×100%. 101 consecutive patients of coronary CT were taken in Hokkaido Cardiovascular Hospital from September 2012 in order to investigate dynamic loads acting on coronary artery. The distance of proximal LAD artery was measured in diastolic phase (Ld) and systolic phase (Ls) from a stretch view taken from CT. Shortening ratio was defined as (Ld-Ls)/Ld ×100%. The twist angle was defined as a sum of the following two angles and mesured in end-systolic and end-diastolic phase. One is tha angle between the line connecting the centers of LAD and left circumflex (LCX), and the perpendicular line toward abdominal to dorsal. The other is the angle between the line connecting the centers of LAD and the first septal branch, and the perpendicular line. Twisting ratio was calculated as θ/Ld ×100%.Results showed that the pre-stretched ratio was calculated to be 7.6±2.9% (mean±SD) in porcine LAD artery. The length of proximal LAD artery of human coronary artery was 26.6 ± 9.3mm (mean±SD). Shortening ratio was calculated to be 6.1 ± 6.2% (mean±SD). And the mean twisting ratio was calculated to be 0.6 °/mm. This study revealed the pre-stretched value of proximal LAD artery due to restrain from the myocardium. Moreover shortening and twisting motions in proximal LAD artery were quantified.

    KW - Coronary artery

    KW - Percutaneous coronary intervention

    KW - Stent

    UR - http://www.scopus.com/inward/record.url?scp=84928237321&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=84928237321&partnerID=8YFLogxK

    U2 - 10.1007/978-3-319-02913-9_207

    DO - 10.1007/978-3-319-02913-9_207

    M3 - Conference contribution

    AN - SCOPUS:84928237321

    SN - 9783319029122

    VL - 43

    SP - 805

    EP - 808

    BT - IFMBE Proceedings

    PB - Springer Verlag

    ER -