Investigation of Multilayer Superhard Ti-Hf-Si-N/NbN/Al2O3 Coatings for High Performance Protection

A. D. Pogrebnjak, A. S. Kaverina, V. M. Beresnev, Y. Takeda, K. Oyoshi, Hideyuki Murakami, A. P. Shypylenko, M. G. Kovaleva, M. S. Prozorova, O. V. Kolisnichenko, B. Zholybekov, D. A. Kolesnikov

Research output: Chapter in Book/Report/Conference proceedingChapter

Abstract

This paper presents a new type of multi-layer (multicomponent) nano- and microstructured coatings Ti-Hf-Si-N/NbN/Al2O3 with thickness up to 200 m. It demonstrates high physicalmechanical and tribological properties. It was found that the investigated coatings, along with high hardness from 47 to 56 GPa and modulus of elasticity from 435 to 570 GPa, the plasticity index 0.08-0.11, have a fairly low coefficient of friction, which varies from 0.02 to 0.001 for a given mode of deposition. It is also shown that these multilayered coatings have high thermal stability (above 1000°C). The annealing temperature up to 1070°C in a vacuum about 10-2 Pa showed that the coating in the upper layers consisting of Ti-Hf-Si-N/NbN the size of nanograins increases from 25 to 56 nm (for the Ti-Hf-Si-N) and from 14-15 to 35-37 nm for NbN. The increase of steel microhardness at the "coating-substrate" interface, is due to the presence of the hardening near the border with coating formed as a result of impact during abrasive blasting and deposition of coating.

Original languageEnglish
Title of host publicationAdvanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials
Publisherwiley
Pages163-171
Number of pages9
ISBN (Electronic)9781119040354
ISBN (Print)9781119040262
DOIs
Publication statusPublished - 2015 Feb 10
Externally publishedYes

Fingerprint

Multilayers
Coatings
Steel
Blasting
Abrasives
Microhardness
Plasticity
Hardening
Thermodynamic stability
Elastic moduli
Hardness
Vacuum
Annealing
Friction
Substrates
Temperature

Keywords

  • Annealing temperature
  • High-performance coating
  • Micro-cracks
  • Microstructured coating
  • Nanohardness
  • Nanostructured coating

ASJC Scopus subject areas

  • Engineering(all)
  • Materials Science(all)

Cite this

Pogrebnjak, A. D., Kaverina, A. S., Beresnev, V. M., Takeda, Y., Oyoshi, K., Murakami, H., ... Kolesnikov, D. A. (2015). Investigation of Multilayer Superhard Ti-Hf-Si-N/NbN/Al2O3 Coatings for High Performance Protection. In Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials (pp. 163-171). wiley. https://doi.org/10.1002/9781119040354.ch18

Investigation of Multilayer Superhard Ti-Hf-Si-N/NbN/Al2O3 Coatings for High Performance Protection. / Pogrebnjak, A. D.; Kaverina, A. S.; Beresnev, V. M.; Takeda, Y.; Oyoshi, K.; Murakami, Hideyuki; Shypylenko, A. P.; Kovaleva, M. G.; Prozorova, M. S.; Kolisnichenko, O. V.; Zholybekov, B.; Kolesnikov, D. A.

Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials. wiley, 2015. p. 163-171.

Research output: Chapter in Book/Report/Conference proceedingChapter

Pogrebnjak, AD, Kaverina, AS, Beresnev, VM, Takeda, Y, Oyoshi, K, Murakami, H, Shypylenko, AP, Kovaleva, MG, Prozorova, MS, Kolisnichenko, OV, Zholybekov, B & Kolesnikov, DA 2015, Investigation of Multilayer Superhard Ti-Hf-Si-N/NbN/Al2O3 Coatings for High Performance Protection. in Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials. wiley, pp. 163-171. https://doi.org/10.1002/9781119040354.ch18
Pogrebnjak AD, Kaverina AS, Beresnev VM, Takeda Y, Oyoshi K, Murakami H et al. Investigation of Multilayer Superhard Ti-Hf-Si-N/NbN/Al2O3 Coatings for High Performance Protection. In Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials. wiley. 2015. p. 163-171 https://doi.org/10.1002/9781119040354.ch18
Pogrebnjak, A. D. ; Kaverina, A. S. ; Beresnev, V. M. ; Takeda, Y. ; Oyoshi, K. ; Murakami, Hideyuki ; Shypylenko, A. P. ; Kovaleva, M. G. ; Prozorova, M. S. ; Kolisnichenko, O. V. ; Zholybekov, B. ; Kolesnikov, D. A. / Investigation of Multilayer Superhard Ti-Hf-Si-N/NbN/Al2O3 Coatings for High Performance Protection. Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials. wiley, 2015. pp. 163-171
@inbook{14d4eb9acd614ed7af4d38d988687151,
title = "Investigation of Multilayer Superhard Ti-Hf-Si-N/NbN/Al2O3 Coatings for High Performance Protection",
abstract = "This paper presents a new type of multi-layer (multicomponent) nano- and microstructured coatings Ti-Hf-Si-N/NbN/Al2O3 with thickness up to 200 m. It demonstrates high physicalmechanical and tribological properties. It was found that the investigated coatings, along with high hardness from 47 to 56 GPa and modulus of elasticity from 435 to 570 GPa, the plasticity index 0.08-0.11, have a fairly low coefficient of friction, which varies from 0.02 to 0.001 for a given mode of deposition. It is also shown that these multilayered coatings have high thermal stability (above 1000°C). The annealing temperature up to 1070°C in a vacuum about 10-2 Pa showed that the coating in the upper layers consisting of Ti-Hf-Si-N/NbN the size of nanograins increases from 25 to 56 nm (for the Ti-Hf-Si-N) and from 14-15 to 35-37 nm for NbN. The increase of steel microhardness at the {"}coating-substrate{"} interface, is due to the presence of the hardening near the border with coating formed as a result of impact during abrasive blasting and deposition of coating.",
keywords = "Annealing temperature, High-performance coating, Micro-cracks, Microstructured coating, Nanohardness, Nanostructured coating",
author = "Pogrebnjak, {A. D.} and Kaverina, {A. S.} and Beresnev, {V. M.} and Y. Takeda and K. Oyoshi and Hideyuki Murakami and Shypylenko, {A. P.} and Kovaleva, {M. G.} and Prozorova, {M. S.} and Kolisnichenko, {O. V.} and B. Zholybekov and Kolesnikov, {D. A.}",
year = "2015",
month = "2",
day = "10",
doi = "10.1002/9781119040354.ch18",
language = "English",
isbn = "9781119040262",
pages = "163--171",
booktitle = "Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials",
publisher = "wiley",

}

TY - CHAP

T1 - Investigation of Multilayer Superhard Ti-Hf-Si-N/NbN/Al2O3 Coatings for High Performance Protection

AU - Pogrebnjak, A. D.

AU - Kaverina, A. S.

AU - Beresnev, V. M.

AU - Takeda, Y.

AU - Oyoshi, K.

AU - Murakami, Hideyuki

AU - Shypylenko, A. P.

AU - Kovaleva, M. G.

AU - Prozorova, M. S.

AU - Kolisnichenko, O. V.

AU - Zholybekov, B.

AU - Kolesnikov, D. A.

PY - 2015/2/10

Y1 - 2015/2/10

N2 - This paper presents a new type of multi-layer (multicomponent) nano- and microstructured coatings Ti-Hf-Si-N/NbN/Al2O3 with thickness up to 200 m. It demonstrates high physicalmechanical and tribological properties. It was found that the investigated coatings, along with high hardness from 47 to 56 GPa and modulus of elasticity from 435 to 570 GPa, the plasticity index 0.08-0.11, have a fairly low coefficient of friction, which varies from 0.02 to 0.001 for a given mode of deposition. It is also shown that these multilayered coatings have high thermal stability (above 1000°C). The annealing temperature up to 1070°C in a vacuum about 10-2 Pa showed that the coating in the upper layers consisting of Ti-Hf-Si-N/NbN the size of nanograins increases from 25 to 56 nm (for the Ti-Hf-Si-N) and from 14-15 to 35-37 nm for NbN. The increase of steel microhardness at the "coating-substrate" interface, is due to the presence of the hardening near the border with coating formed as a result of impact during abrasive blasting and deposition of coating.

AB - This paper presents a new type of multi-layer (multicomponent) nano- and microstructured coatings Ti-Hf-Si-N/NbN/Al2O3 with thickness up to 200 m. It demonstrates high physicalmechanical and tribological properties. It was found that the investigated coatings, along with high hardness from 47 to 56 GPa and modulus of elasticity from 435 to 570 GPa, the plasticity index 0.08-0.11, have a fairly low coefficient of friction, which varies from 0.02 to 0.001 for a given mode of deposition. It is also shown that these multilayered coatings have high thermal stability (above 1000°C). The annealing temperature up to 1070°C in a vacuum about 10-2 Pa showed that the coating in the upper layers consisting of Ti-Hf-Si-N/NbN the size of nanograins increases from 25 to 56 nm (for the Ti-Hf-Si-N) and from 14-15 to 35-37 nm for NbN. The increase of steel microhardness at the "coating-substrate" interface, is due to the presence of the hardening near the border with coating formed as a result of impact during abrasive blasting and deposition of coating.

KW - Annealing temperature

KW - High-performance coating

KW - Micro-cracks

KW - Microstructured coating

KW - Nanohardness

KW - Nanostructured coating

UR - http://www.scopus.com/inward/record.url?scp=85016042081&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85016042081&partnerID=8YFLogxK

U2 - 10.1002/9781119040354.ch18

DO - 10.1002/9781119040354.ch18

M3 - Chapter

SN - 9781119040262

SP - 163

EP - 171

BT - Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials

PB - wiley

ER -