Ionic wind in pin-to-plate corona discharge system

Hiroyuki Kawamoto, Hiromu Yasuda, Shinjiro Umezu

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

Electroaerodynamic investigation has been carried out in a pin-to-plate gas discharge system to clarify the mechanism of repulsive force generation between the pin and the plate electrode at corona discharge. Numerical calculation has been conducted by two steps. At the first place, corona discharge field was calculated with the finite element method to deduce volumetric force ρE, where ρ is the charge density and E is the electric field, applied to the air, and then induced ionic wind was calculated with the finite differential method. Calculated pressure distribution on the plate electrode was in the order of 10 Pa that was in good agreement with the measured pressure distribution. Calculated velocity at the center was several m/s that is confirmed by a time-of-flight experiment and the velocity distribution near the pin electrode also agreed with the measured with a laser Doppler velocimeter. Pressure and wind velocity were increased at high applied voltage. These results confirm that the ionic wind is the cause of the repulsive force to the pin electrode at the corona discharge.

Original languageEnglish
Pages (from-to)169-175
Number of pages7
JournalNippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
Volume70
Issue number1
Publication statusPublished - 2004 Jan 1

Keywords

  • Corona discharge
  • Electroaerodynamics
  • Electromagnetic-induced vibration
  • Electrostatic force
  • Gas discharge
  • Ionic wind

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Fingerprint Dive into the research topics of 'Ionic wind in pin-to-plate corona discharge system'. Together they form a unique fingerprint.

  • Cite this