Joint-compliance control of the multiple dof manipulator

Shigeki Sugano, M. Hirayama, T. Hatase, M. Kaneko, I. Kato

Research output: Contribution to journalConference article

Abstract

This paper proposes the control method of the end- point compliance of multiple degrees of freedom (DOF) manipulator by determining each joint compliance directly. Using this passive force control, it is advantageous for the robot manipulator to perform some tasks with constraint on the mobile mechanism such as biped walking machine. Since there are so many parameters to get an arbitrary end-point compliance, this study proposes the introduction of finger-arm compliance coordination and the utilization of the resundancy of the arm. For finger-arm coordination, referring to the motion of a human being, the translation compliance is disposed of by a 7-DOF arm and the rotation compliance is controlled by 20-DOF fingers. As for the redundancy, a method is considered for the use of redundant DOF for changing the arm posture to avoid the negative joint compliance. As a result, a method of calculation has been established for each joint compliance that assures end- point compliance suitable for work.

Original languageEnglish
Article number593355
Pages (from-to)391-396
Number of pages6
JournalIEEE International Conference on Intelligent Robots and Systems
Volume1988-October
DOIs
Publication statusPublished - 1988 Jan 1
Event1988 IEEE International Workshop on Intelligent Robots and Systems: Toward the Next Generation Robot and System, IROS 1988 - Tokyo, Japan
Duration: 1988 Oct 311988 Nov 2

    Fingerprint

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Software
  • Computer Vision and Pattern Recognition
  • Computer Science Applications

Cite this