Kinetic Modeling of Ammonia-SCR and Experimental Studies over Monolithic Cu-ZSM-5 Catalyst

Wataru Eijima, Gen Shibata, Yoshimitsu Kobashi, Ryutaro Koiwai, Hideyuki Ogawa, Kenichi Shimizu, Jin Kusaka

Research output: Contribution to journalConference article

1 Citation (Scopus)

Abstract

Ammonia-selective catalytic reduction (SCR) systems have been introduced commercially in diesel vehicles, however catalyst systems with higher conversion efficiency and better control characteristics are required to know the actual emissions during operation and the emissions in random test cycles. Computational fluid dynamics (CFD) is an effective approach when applied to SCR catalyst development, and many models have been proposed, but these models need experimental verification and are limited in the situations they apply to. Further, taking account of redox cycle is important to have better accuracy in transient operation, however there are few models considering the cycle. Model development considering the redox reactions in a zeolite catalyst, Cu-ZSM-5, is the object of the research here, and the effects of exhaust gas composition on the SCR reaction and NH3 oxidation at high temperatures are investigated. The simulations are compared with the experimental results of a surrogate gas, a mixture of nitrogen monoxide (NO), oxygen (O2), water vapor (H2O), and nitrogen (N2), and the accuracy of the developed model is validated. To investigate the effects of O2 concentration on standard SCR and NH3 oxidation, the experiments are conducted with the surrogate gas. The results suggest that the O2 has a larger reaction order (1.25-1.51) to NH3 oxidation than that to the standard SCR (0.73-0.75). The model considering these reaction orders of O2 predicts the effect of O2 on NOx and NH3 conversions well. A transient operation experiment is also conducted with the Cu-ZSM-5 catalyst. The experiment consists of NH3 adsorption part and NO reduction part, where the re-oxidizing of copper does not occur. The results clearly show that Cu+ does not contribute to the SCR reaction. Further, the NH3-SCR simulation model was greatly improved by considering the redox reaction cycle and the concentrations of oxygen.

Original languageEnglish
JournalSAE Technical Papers
Volume2019-January
Issue numberJanuary
DOIs
Publication statusPublished - 2019 Jan 15
EventSAE 2019 International Powertrains, Fuels and Lubricants Meeting, FFL 2019 - San Antonio, United States
Duration: 2019 Jan 222019 Jan 24

Fingerprint

Selective catalytic reduction
Ammonia
Catalysts
Kinetics
Redox reactions
Nitrogen
Oxidation
Oxygen
Experiments
Exhaust gases
Gases
Water vapor
Conversion efficiency
Computational fluid dynamics
Copper
Adsorption
Chemical analysis

ASJC Scopus subject areas

  • Automotive Engineering
  • Safety, Risk, Reliability and Quality
  • Pollution
  • Industrial and Manufacturing Engineering

Cite this

Eijima, W., Shibata, G., Kobashi, Y., Koiwai, R., Ogawa, H., Shimizu, K., & Kusaka, J. (2019). Kinetic Modeling of Ammonia-SCR and Experimental Studies over Monolithic Cu-ZSM-5 Catalyst. SAE Technical Papers, 2019-January(January). https://doi.org/10.4271/2019-01-0024

Kinetic Modeling of Ammonia-SCR and Experimental Studies over Monolithic Cu-ZSM-5 Catalyst. / Eijima, Wataru; Shibata, Gen; Kobashi, Yoshimitsu; Koiwai, Ryutaro; Ogawa, Hideyuki; Shimizu, Kenichi; Kusaka, Jin.

In: SAE Technical Papers, Vol. 2019-January, No. January, 15.01.2019.

Research output: Contribution to journalConference article

Eijima, W, Shibata, G, Kobashi, Y, Koiwai, R, Ogawa, H, Shimizu, K & Kusaka, J 2019, 'Kinetic Modeling of Ammonia-SCR and Experimental Studies over Monolithic Cu-ZSM-5 Catalyst', SAE Technical Papers, vol. 2019-January, no. January. https://doi.org/10.4271/2019-01-0024
Eijima W, Shibata G, Kobashi Y, Koiwai R, Ogawa H, Shimizu K et al. Kinetic Modeling of Ammonia-SCR and Experimental Studies over Monolithic Cu-ZSM-5 Catalyst. SAE Technical Papers. 2019 Jan 15;2019-January(January). https://doi.org/10.4271/2019-01-0024
Eijima, Wataru ; Shibata, Gen ; Kobashi, Yoshimitsu ; Koiwai, Ryutaro ; Ogawa, Hideyuki ; Shimizu, Kenichi ; Kusaka, Jin. / Kinetic Modeling of Ammonia-SCR and Experimental Studies over Monolithic Cu-ZSM-5 Catalyst. In: SAE Technical Papers. 2019 ; Vol. 2019-January, No. January.
@article{4358592d847849a3b8b4de7f5807b2b1,
title = "Kinetic Modeling of Ammonia-SCR and Experimental Studies over Monolithic Cu-ZSM-5 Catalyst",
abstract = "Ammonia-selective catalytic reduction (SCR) systems have been introduced commercially in diesel vehicles, however catalyst systems with higher conversion efficiency and better control characteristics are required to know the actual emissions during operation and the emissions in random test cycles. Computational fluid dynamics (CFD) is an effective approach when applied to SCR catalyst development, and many models have been proposed, but these models need experimental verification and are limited in the situations they apply to. Further, taking account of redox cycle is important to have better accuracy in transient operation, however there are few models considering the cycle. Model development considering the redox reactions in a zeolite catalyst, Cu-ZSM-5, is the object of the research here, and the effects of exhaust gas composition on the SCR reaction and NH3 oxidation at high temperatures are investigated. The simulations are compared with the experimental results of a surrogate gas, a mixture of nitrogen monoxide (NO), oxygen (O2), water vapor (H2O), and nitrogen (N2), and the accuracy of the developed model is validated. To investigate the effects of O2 concentration on standard SCR and NH3 oxidation, the experiments are conducted with the surrogate gas. The results suggest that the O2 has a larger reaction order (1.25-1.51) to NH3 oxidation than that to the standard SCR (0.73-0.75). The model considering these reaction orders of O2 predicts the effect of O2 on NOx and NH3 conversions well. A transient operation experiment is also conducted with the Cu-ZSM-5 catalyst. The experiment consists of NH3 adsorption part and NO reduction part, where the re-oxidizing of copper does not occur. The results clearly show that Cu+ does not contribute to the SCR reaction. Further, the NH3-SCR simulation model was greatly improved by considering the redox reaction cycle and the concentrations of oxygen.",
author = "Wataru Eijima and Gen Shibata and Yoshimitsu Kobashi and Ryutaro Koiwai and Hideyuki Ogawa and Kenichi Shimizu and Jin Kusaka",
year = "2019",
month = "1",
day = "15",
doi = "10.4271/2019-01-0024",
language = "English",
volume = "2019-January",
journal = "SAE Technical Papers",
issn = "0148-7191",
publisher = "SAE International",
number = "January",

}

TY - JOUR

T1 - Kinetic Modeling of Ammonia-SCR and Experimental Studies over Monolithic Cu-ZSM-5 Catalyst

AU - Eijima, Wataru

AU - Shibata, Gen

AU - Kobashi, Yoshimitsu

AU - Koiwai, Ryutaro

AU - Ogawa, Hideyuki

AU - Shimizu, Kenichi

AU - Kusaka, Jin

PY - 2019/1/15

Y1 - 2019/1/15

N2 - Ammonia-selective catalytic reduction (SCR) systems have been introduced commercially in diesel vehicles, however catalyst systems with higher conversion efficiency and better control characteristics are required to know the actual emissions during operation and the emissions in random test cycles. Computational fluid dynamics (CFD) is an effective approach when applied to SCR catalyst development, and many models have been proposed, but these models need experimental verification and are limited in the situations they apply to. Further, taking account of redox cycle is important to have better accuracy in transient operation, however there are few models considering the cycle. Model development considering the redox reactions in a zeolite catalyst, Cu-ZSM-5, is the object of the research here, and the effects of exhaust gas composition on the SCR reaction and NH3 oxidation at high temperatures are investigated. The simulations are compared with the experimental results of a surrogate gas, a mixture of nitrogen monoxide (NO), oxygen (O2), water vapor (H2O), and nitrogen (N2), and the accuracy of the developed model is validated. To investigate the effects of O2 concentration on standard SCR and NH3 oxidation, the experiments are conducted with the surrogate gas. The results suggest that the O2 has a larger reaction order (1.25-1.51) to NH3 oxidation than that to the standard SCR (0.73-0.75). The model considering these reaction orders of O2 predicts the effect of O2 on NOx and NH3 conversions well. A transient operation experiment is also conducted with the Cu-ZSM-5 catalyst. The experiment consists of NH3 adsorption part and NO reduction part, where the re-oxidizing of copper does not occur. The results clearly show that Cu+ does not contribute to the SCR reaction. Further, the NH3-SCR simulation model was greatly improved by considering the redox reaction cycle and the concentrations of oxygen.

AB - Ammonia-selective catalytic reduction (SCR) systems have been introduced commercially in diesel vehicles, however catalyst systems with higher conversion efficiency and better control characteristics are required to know the actual emissions during operation and the emissions in random test cycles. Computational fluid dynamics (CFD) is an effective approach when applied to SCR catalyst development, and many models have been proposed, but these models need experimental verification and are limited in the situations they apply to. Further, taking account of redox cycle is important to have better accuracy in transient operation, however there are few models considering the cycle. Model development considering the redox reactions in a zeolite catalyst, Cu-ZSM-5, is the object of the research here, and the effects of exhaust gas composition on the SCR reaction and NH3 oxidation at high temperatures are investigated. The simulations are compared with the experimental results of a surrogate gas, a mixture of nitrogen monoxide (NO), oxygen (O2), water vapor (H2O), and nitrogen (N2), and the accuracy of the developed model is validated. To investigate the effects of O2 concentration on standard SCR and NH3 oxidation, the experiments are conducted with the surrogate gas. The results suggest that the O2 has a larger reaction order (1.25-1.51) to NH3 oxidation than that to the standard SCR (0.73-0.75). The model considering these reaction orders of O2 predicts the effect of O2 on NOx and NH3 conversions well. A transient operation experiment is also conducted with the Cu-ZSM-5 catalyst. The experiment consists of NH3 adsorption part and NO reduction part, where the re-oxidizing of copper does not occur. The results clearly show that Cu+ does not contribute to the SCR reaction. Further, the NH3-SCR simulation model was greatly improved by considering the redox reaction cycle and the concentrations of oxygen.

UR - http://www.scopus.com/inward/record.url?scp=85060552666&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85060552666&partnerID=8YFLogxK

U2 - 10.4271/2019-01-0024

DO - 10.4271/2019-01-0024

M3 - Conference article

VL - 2019-January

JO - SAE Technical Papers

JF - SAE Technical Papers

SN - 0148-7191

IS - January

ER -