Liquidus relationships of calcium ferrite and ferrous calcium silicate slag in continuous copper converting

F. Kongoli, I. McBow, A. Yazawa, Y. Takeda, Katsunori Yamaguchi, R. Budd, S. Llubani

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

While calcium ferrite slags have been successfully used in continuous copper converting for the past 30 years, ferrous calcium silicate slag was proposed ∼8 years ago as an additional alternative for copper smelting. Although these slags are normal extensions of each other, their phase relations have not been completely clarified. In this paper, liquidus relations for both slags have been quantified in some regions of common composition. Existing experimental data are reviewed and discussed in relation to the solidification procedure. An original physical model is then used to predict diagrams of the liquidus surface of both slags. It is shown that the ternary liquidus diagrams normally used for FeOx-SiO2-CaO system are not suitable for industrial slags. The new model diagrams of Fe/CaO versus SiO2 and Fe/SiO2 versus CaO, as well as Fe/CaO versus temperature and Fe/SiO2 versus temperature are proven much more convenient for ferrite and ferrous calcium silicate slags. Based on these diagrams, the effect of SiO2 and CaO on the melting temperature is quantified. The effect of Cu2O is also quantified through the model. Fe/CaO versus Cu 2O and Fe/SiO2 versus CaO relationships at various copper contents are predicted. The results show good agreement with the experimental data. It is also shown that, in the presence of liquid copper, Cu2O is dissolved in the slag to an extent depending on the oxidation degree of the system, which may lower the liquidus temperature. Discussions are presented taking into account plant observations, and important conclusions are drawn for copper smelting and converting.

Original languageEnglish
Pages (from-to)67-76
Number of pages10
JournalTransactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy
Volume117
Issue number2
DOIs
Publication statusPublished - 2008 Jun
Externally publishedYes

Fingerprint

Calcium silicate
ferrite
slag
Slags
Ferrite
Copper
Calcium
silicate
calcium
copper
diagram
Copper smelting
smelting
temperature
calcium silicate
solidification
Temperature
Melting point
Solidification
melting

Keywords

  • Calcium ferrite slag
  • CaO
  • Converting
  • Copper
  • Copper smelting
  • Cu2O
  • FeOx
  • Ferrous calcium silicate slag
  • SiO2

ASJC Scopus subject areas

  • Chemistry(all)
  • Geotechnical Engineering and Engineering Geology
  • Geochemistry and Petrology

Cite this

Liquidus relationships of calcium ferrite and ferrous calcium silicate slag in continuous copper converting. / Kongoli, F.; McBow, I.; Yazawa, A.; Takeda, Y.; Yamaguchi, Katsunori; Budd, R.; Llubani, S.

In: Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy, Vol. 117, No. 2, 06.2008, p. 67-76.

Research output: Contribution to journalArticle

@article{38233d0a58014e7dbc4949d40def1f68,
title = "Liquidus relationships of calcium ferrite and ferrous calcium silicate slag in continuous copper converting",
abstract = "While calcium ferrite slags have been successfully used in continuous copper converting for the past 30 years, ferrous calcium silicate slag was proposed ∼8 years ago as an additional alternative for copper smelting. Although these slags are normal extensions of each other, their phase relations have not been completely clarified. In this paper, liquidus relations for both slags have been quantified in some regions of common composition. Existing experimental data are reviewed and discussed in relation to the solidification procedure. An original physical model is then used to predict diagrams of the liquidus surface of both slags. It is shown that the ternary liquidus diagrams normally used for FeOx-SiO2-CaO system are not suitable for industrial slags. The new model diagrams of Fe/CaO versus SiO2 and Fe/SiO2 versus CaO, as well as Fe/CaO versus temperature and Fe/SiO2 versus temperature are proven much more convenient for ferrite and ferrous calcium silicate slags. Based on these diagrams, the effect of SiO2 and CaO on the melting temperature is quantified. The effect of Cu2O is also quantified through the model. Fe/CaO versus Cu 2O and Fe/SiO2 versus CaO relationships at various copper contents are predicted. The results show good agreement with the experimental data. It is also shown that, in the presence of liquid copper, Cu2O is dissolved in the slag to an extent depending on the oxidation degree of the system, which may lower the liquidus temperature. Discussions are presented taking into account plant observations, and important conclusions are drawn for copper smelting and converting.",
keywords = "Calcium ferrite slag, CaO, Converting, Copper, Copper smelting, Cu2O, FeOx, Ferrous calcium silicate slag, SiO2",
author = "F. Kongoli and I. McBow and A. Yazawa and Y. Takeda and Katsunori Yamaguchi and R. Budd and S. Llubani",
year = "2008",
month = "6",
doi = "10.1179/174328508X290849",
language = "English",
volume = "117",
pages = "67--76",
journal = "Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy",
issn = "0371-9553",
publisher = "Maney Publishing",
number = "2",

}

TY - JOUR

T1 - Liquidus relationships of calcium ferrite and ferrous calcium silicate slag in continuous copper converting

AU - Kongoli, F.

AU - McBow, I.

AU - Yazawa, A.

AU - Takeda, Y.

AU - Yamaguchi, Katsunori

AU - Budd, R.

AU - Llubani, S.

PY - 2008/6

Y1 - 2008/6

N2 - While calcium ferrite slags have been successfully used in continuous copper converting for the past 30 years, ferrous calcium silicate slag was proposed ∼8 years ago as an additional alternative for copper smelting. Although these slags are normal extensions of each other, their phase relations have not been completely clarified. In this paper, liquidus relations for both slags have been quantified in some regions of common composition. Existing experimental data are reviewed and discussed in relation to the solidification procedure. An original physical model is then used to predict diagrams of the liquidus surface of both slags. It is shown that the ternary liquidus diagrams normally used for FeOx-SiO2-CaO system are not suitable for industrial slags. The new model diagrams of Fe/CaO versus SiO2 and Fe/SiO2 versus CaO, as well as Fe/CaO versus temperature and Fe/SiO2 versus temperature are proven much more convenient for ferrite and ferrous calcium silicate slags. Based on these diagrams, the effect of SiO2 and CaO on the melting temperature is quantified. The effect of Cu2O is also quantified through the model. Fe/CaO versus Cu 2O and Fe/SiO2 versus CaO relationships at various copper contents are predicted. The results show good agreement with the experimental data. It is also shown that, in the presence of liquid copper, Cu2O is dissolved in the slag to an extent depending on the oxidation degree of the system, which may lower the liquidus temperature. Discussions are presented taking into account plant observations, and important conclusions are drawn for copper smelting and converting.

AB - While calcium ferrite slags have been successfully used in continuous copper converting for the past 30 years, ferrous calcium silicate slag was proposed ∼8 years ago as an additional alternative for copper smelting. Although these slags are normal extensions of each other, their phase relations have not been completely clarified. In this paper, liquidus relations for both slags have been quantified in some regions of common composition. Existing experimental data are reviewed and discussed in relation to the solidification procedure. An original physical model is then used to predict diagrams of the liquidus surface of both slags. It is shown that the ternary liquidus diagrams normally used for FeOx-SiO2-CaO system are not suitable for industrial slags. The new model diagrams of Fe/CaO versus SiO2 and Fe/SiO2 versus CaO, as well as Fe/CaO versus temperature and Fe/SiO2 versus temperature are proven much more convenient for ferrite and ferrous calcium silicate slags. Based on these diagrams, the effect of SiO2 and CaO on the melting temperature is quantified. The effect of Cu2O is also quantified through the model. Fe/CaO versus Cu 2O and Fe/SiO2 versus CaO relationships at various copper contents are predicted. The results show good agreement with the experimental data. It is also shown that, in the presence of liquid copper, Cu2O is dissolved in the slag to an extent depending on the oxidation degree of the system, which may lower the liquidus temperature. Discussions are presented taking into account plant observations, and important conclusions are drawn for copper smelting and converting.

KW - Calcium ferrite slag

KW - CaO

KW - Converting

KW - Copper

KW - Copper smelting

KW - Cu2O

KW - FeOx

KW - Ferrous calcium silicate slag

KW - SiO2

UR - http://www.scopus.com/inward/record.url?scp=48849099793&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=48849099793&partnerID=8YFLogxK

U2 - 10.1179/174328508X290849

DO - 10.1179/174328508X290849

M3 - Article

AN - SCOPUS:48849099793

VL - 117

SP - 67

EP - 76

JO - Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy

JF - Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy

SN - 0371-9553

IS - 2

ER -