Load-bearing pattern of the ankle joint - Contact Area and Pressure Distribution

Mamori Kimizuka, Hisashi Kurosawa, Toru Fukubayashi

Research output: Contribution to journalArticle

111 Citations (Scopus)

Abstract

The contact area of eight human talocrural joints was measured. After preparation, the talocrural joint was set into the compression machine. Under loading the casting was made by silicon rubber and the pressure distribution was measured by pressure sensor sheet. The contact area was localized at anterior and lateral parts. Under 1,500 N loading, the contact area was 522 mm2 and the maximum pressure was 9.9 MPa. Slight diastasis caused a decrease of the contact area and an increase of pressure.

Original languageEnglish
Pages (from-to)45-49
Number of pages5
JournalArchives of Orthopaedic and Traumatic Surgery
Volume96
Issue number1
DOIs
Publication statusPublished - 1980 Mar
Externally publishedYes

ASJC Scopus subject areas

  • Surgery

Fingerprint Dive into the research topics of 'Load-bearing pattern of the ankle joint - Contact Area and Pressure Distribution'. Together they form a unique fingerprint.

  • Cite this