Load distribution analysis method for cylindrical worm gear teeth

Katsuzo Sudoh, Yasuyuki Tanaka, Susumu Matsumoto, Yasuyoshi Tozaki

    Research output: Contribution to journalArticle

    12 Citations (Scopus)

    Abstract

    Worm gears provide large reduction ratios and low noise for their load capacities. However, owing to manufacturing errors and bending deflections under load, a worm and a wheel do not operate at their theoretical load during meshing. It is important to predict the load distribution considering the tooth profile and assembling error. A method for determining the load distribution, Hertzian contact pressure and oil film thickness is presented in this paper. Using our empirical formula for bending deflections, we developed the transformation matrix. The deflection along the load direction at any point on the contact line at the same meshing position is expressed by the matrix of transformation. Using this matrix, the load distribution of a worm and wheel is evaluated using numerical analysis. Calculated results clearly agree with experimental ones obtained under actual operating, conditions.

    Original languageEnglish
    Pages (from-to)606-613
    Number of pages8
    JournalJSME International Journal, Series C: Dynamics, Control, Robotics, Design and Manufacturing
    Volume39
    Issue number3
    Publication statusPublished - 1996 Sep

    Fingerprint

    Worm gears
    Gear teeth
    Wheels
    Film thickness
    Numerical analysis

    Keywords

    • Contact Problem
    • Gear
    • Laser Holographic Interferometry
    • Load Distribution
    • Machine Element
    • Numerical Analysis
    • Wheel
    • Worm

    ASJC Scopus subject areas

    • Engineering(all)
    • Industrial and Manufacturing Engineering
    • Mechanical Engineering

    Cite this

    Load distribution analysis method for cylindrical worm gear teeth. / Sudoh, Katsuzo; Tanaka, Yasuyuki; Matsumoto, Susumu; Tozaki, Yasuyoshi.

    In: JSME International Journal, Series C: Dynamics, Control, Robotics, Design and Manufacturing, Vol. 39, No. 3, 09.1996, p. 606-613.

    Research output: Contribution to journalArticle

    Sudoh, Katsuzo ; Tanaka, Yasuyuki ; Matsumoto, Susumu ; Tozaki, Yasuyoshi. / Load distribution analysis method for cylindrical worm gear teeth. In: JSME International Journal, Series C: Dynamics, Control, Robotics, Design and Manufacturing. 1996 ; Vol. 39, No. 3. pp. 606-613.
    @article{20beb11db2c640748813d51dc80ae23e,
    title = "Load distribution analysis method for cylindrical worm gear teeth",
    abstract = "Worm gears provide large reduction ratios and low noise for their load capacities. However, owing to manufacturing errors and bending deflections under load, a worm and a wheel do not operate at their theoretical load during meshing. It is important to predict the load distribution considering the tooth profile and assembling error. A method for determining the load distribution, Hertzian contact pressure and oil film thickness is presented in this paper. Using our empirical formula for bending deflections, we developed the transformation matrix. The deflection along the load direction at any point on the contact line at the same meshing position is expressed by the matrix of transformation. Using this matrix, the load distribution of a worm and wheel is evaluated using numerical analysis. Calculated results clearly agree with experimental ones obtained under actual operating, conditions.",
    keywords = "Contact Problem, Gear, Laser Holographic Interferometry, Load Distribution, Machine Element, Numerical Analysis, Wheel, Worm",
    author = "Katsuzo Sudoh and Yasuyuki Tanaka and Susumu Matsumoto and Yasuyoshi Tozaki",
    year = "1996",
    month = "9",
    language = "English",
    volume = "39",
    pages = "606--613",
    journal = "JSME International Journal, Series C: Dynamics, Control, Robotics, Design and Menufacturing",
    issn = "1340-8062",
    publisher = "Japan Society of Mechanical Engineers",
    number = "3",

    }

    TY - JOUR

    T1 - Load distribution analysis method for cylindrical worm gear teeth

    AU - Sudoh, Katsuzo

    AU - Tanaka, Yasuyuki

    AU - Matsumoto, Susumu

    AU - Tozaki, Yasuyoshi

    PY - 1996/9

    Y1 - 1996/9

    N2 - Worm gears provide large reduction ratios and low noise for their load capacities. However, owing to manufacturing errors and bending deflections under load, a worm and a wheel do not operate at their theoretical load during meshing. It is important to predict the load distribution considering the tooth profile and assembling error. A method for determining the load distribution, Hertzian contact pressure and oil film thickness is presented in this paper. Using our empirical formula for bending deflections, we developed the transformation matrix. The deflection along the load direction at any point on the contact line at the same meshing position is expressed by the matrix of transformation. Using this matrix, the load distribution of a worm and wheel is evaluated using numerical analysis. Calculated results clearly agree with experimental ones obtained under actual operating, conditions.

    AB - Worm gears provide large reduction ratios and low noise for their load capacities. However, owing to manufacturing errors and bending deflections under load, a worm and a wheel do not operate at their theoretical load during meshing. It is important to predict the load distribution considering the tooth profile and assembling error. A method for determining the load distribution, Hertzian contact pressure and oil film thickness is presented in this paper. Using our empirical formula for bending deflections, we developed the transformation matrix. The deflection along the load direction at any point on the contact line at the same meshing position is expressed by the matrix of transformation. Using this matrix, the load distribution of a worm and wheel is evaluated using numerical analysis. Calculated results clearly agree with experimental ones obtained under actual operating, conditions.

    KW - Contact Problem

    KW - Gear

    KW - Laser Holographic Interferometry

    KW - Load Distribution

    KW - Machine Element

    KW - Numerical Analysis

    KW - Wheel

    KW - Worm

    UR - http://www.scopus.com/inward/record.url?scp=0030234782&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=0030234782&partnerID=8YFLogxK

    M3 - Article

    VL - 39

    SP - 606

    EP - 613

    JO - JSME International Journal, Series C: Dynamics, Control, Robotics, Design and Menufacturing

    JF - JSME International Journal, Series C: Dynamics, Control, Robotics, Design and Menufacturing

    SN - 1340-8062

    IS - 3

    ER -