MEASUREMENT OF VOID FRACTION IN A 4 multiplied by 4 ROD BUNDLE BY X-RAY CT SCANNER.

M. Iizuka, Shinichi Morooka, T. Ishizuka, T. Kagawa, S. Ogiya

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

This paper describes measurement of local void fraction in a horizontal 4 multiplied by 4 rod bundle using X-ray CT scanner. The X-ray CT scanner consists of an X-ray tube and detectors which linearly scans over two-phase flow test section. Measurement was conducted in air-water flow at atmospheric pressure. It was shown that distribution of subchannel average void fraction obtained from local void fraction becomes homogeneous as flow quality or mass flux increases.

Original languageEnglish
Title of host publicationAmerican Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED
EditorsE.E. Michaelides
Place of PublicationNew York, NY, USA
PublisherASME
Pages35-40
Number of pages6
Volume29
Publication statusPublished - 1985
Externally publishedYes

Fingerprint

Void fraction
X rays
X ray tubes
Two phase flow
Atmospheric pressure
Mass transfer
Detectors
Air
Water

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Iizuka, M., Morooka, S., Ishizuka, T., Kagawa, T., & Ogiya, S. (1985). MEASUREMENT OF VOID FRACTION IN A 4 multiplied by 4 ROD BUNDLE BY X-RAY CT SCANNER. In E. E. Michaelides (Ed.), American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED (Vol. 29, pp. 35-40). New York, NY, USA: ASME.

MEASUREMENT OF VOID FRACTION IN A 4 multiplied by 4 ROD BUNDLE BY X-RAY CT SCANNER. / Iizuka, M.; Morooka, Shinichi; Ishizuka, T.; Kagawa, T.; Ogiya, S.

American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED. ed. / E.E. Michaelides. Vol. 29 New York, NY, USA : ASME, 1985. p. 35-40.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Iizuka, M, Morooka, S, Ishizuka, T, Kagawa, T & Ogiya, S 1985, MEASUREMENT OF VOID FRACTION IN A 4 multiplied by 4 ROD BUNDLE BY X-RAY CT SCANNER. in EE Michaelides (ed.), American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED. vol. 29, ASME, New York, NY, USA, pp. 35-40.
Iizuka M, Morooka S, Ishizuka T, Kagawa T, Ogiya S. MEASUREMENT OF VOID FRACTION IN A 4 multiplied by 4 ROD BUNDLE BY X-RAY CT SCANNER. In Michaelides EE, editor, American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED. Vol. 29. New York, NY, USA: ASME. 1985. p. 35-40
Iizuka, M. ; Morooka, Shinichi ; Ishizuka, T. ; Kagawa, T. ; Ogiya, S. / MEASUREMENT OF VOID FRACTION IN A 4 multiplied by 4 ROD BUNDLE BY X-RAY CT SCANNER. American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED. editor / E.E. Michaelides. Vol. 29 New York, NY, USA : ASME, 1985. pp. 35-40
@inproceedings{d717d876cea64839b98077a9c0a38c87,
title = "MEASUREMENT OF VOID FRACTION IN A 4 multiplied by 4 ROD BUNDLE BY X-RAY CT SCANNER.",
abstract = "This paper describes measurement of local void fraction in a horizontal 4 multiplied by 4 rod bundle using X-ray CT scanner. The X-ray CT scanner consists of an X-ray tube and detectors which linearly scans over two-phase flow test section. Measurement was conducted in air-water flow at atmospheric pressure. It was shown that distribution of subchannel average void fraction obtained from local void fraction becomes homogeneous as flow quality or mass flux increases.",
author = "M. Iizuka and Shinichi Morooka and T. Ishizuka and T. Kagawa and S. Ogiya",
year = "1985",
language = "English",
volume = "29",
pages = "35--40",
editor = "E.E. Michaelides",
booktitle = "American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED",
publisher = "ASME",

}

TY - GEN

T1 - MEASUREMENT OF VOID FRACTION IN A 4 multiplied by 4 ROD BUNDLE BY X-RAY CT SCANNER.

AU - Iizuka, M.

AU - Morooka, Shinichi

AU - Ishizuka, T.

AU - Kagawa, T.

AU - Ogiya, S.

PY - 1985

Y1 - 1985

N2 - This paper describes measurement of local void fraction in a horizontal 4 multiplied by 4 rod bundle using X-ray CT scanner. The X-ray CT scanner consists of an X-ray tube and detectors which linearly scans over two-phase flow test section. Measurement was conducted in air-water flow at atmospheric pressure. It was shown that distribution of subchannel average void fraction obtained from local void fraction becomes homogeneous as flow quality or mass flux increases.

AB - This paper describes measurement of local void fraction in a horizontal 4 multiplied by 4 rod bundle using X-ray CT scanner. The X-ray CT scanner consists of an X-ray tube and detectors which linearly scans over two-phase flow test section. Measurement was conducted in air-water flow at atmospheric pressure. It was shown that distribution of subchannel average void fraction obtained from local void fraction becomes homogeneous as flow quality or mass flux increases.

UR - http://www.scopus.com/inward/record.url?scp=0022269708&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0022269708&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:0022269708

VL - 29

SP - 35

EP - 40

BT - American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED

A2 - Michaelides, E.E.

PB - ASME

CY - New York, NY, USA

ER -