Melt drag process with improved and controlled cooling system by forming belt

Shinsuke Suzuki, Mitsugu Motomura, Toshio Haga

    Research output: Contribution to journalArticle

    1 Citation (Scopus)

    Abstract

    In this study, a forming belt was attached to the free solidified surface side of melt drag process which is a kind of single roll process. The purpose of the forming belt is forming and cooling the free solidified surface of the strip. Al-Si alloy was used as the experimental specimen. As the result , this forming belt made possible to produce strips with sound surfaces , improved and controlled cooling conditions at higher roll speed than the conventional strip casters and improve and control cooling conditions.

    Original languageEnglish
    Pages (from-to)299-304
    Number of pages6
    JournalMaterials Science Forum
    Volume217-222
    Issue numberPART 1
    Publication statusPublished - 1996

      Fingerprint

    Keywords

    • Forming belt
    • Melt drag process
    • Rapid solidification
    • Single roll method
    • Strip casting

    ASJC Scopus subject areas

    • Materials Science(all)

    Cite this