Minimum requirements of motor vector control modeling and simulation utilizing C MEX S-function in MATLAB/SIMULINK

F. Yusivar, Shinji Wakao

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)

Abstract

This paper describes a simple way to utilize C MEX S-function in MATLAB/SIMULINK for motor vector control modeling and simulation purposes. C MEX S-function is a powerful block in SIMULINK that capable to describe a dynamic system written in C language and linked into MATLAB. Basically it is categorized into three minimum structures. It is possible to model and simulate a vector-controlled motor drive with only using combination of these structures. A memory block is used for eliminating an algebraic loop so that speeding up the simulation. Simulation results will be compared with experimental ones for validation.

Original languageEnglish
Title of host publicationProceedings of the International Conference on Power Electronics and Drive Systems
Pages315-321
Number of pages7
Volume1
Publication statusPublished - 2001
Externally publishedYes
Event4th IEEE International Conference on Power Electronics and Drive Systems - Denpassar, Bali
Duration: 2001 Oct 222001 Oct 25

Other

Other4th IEEE International Conference on Power Electronics and Drive Systems
CityDenpassar, Bali
Period01/10/2201/10/25

Fingerprint

MATLAB
Dynamical systems
Data storage equipment

Keywords

  • Induction machines
  • Matlab
  • Modeling
  • Simulation
  • Simulink
  • Vector control

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Yusivar, F., & Wakao, S. (2001). Minimum requirements of motor vector control modeling and simulation utilizing C MEX S-function in MATLAB/SIMULINK. In Proceedings of the International Conference on Power Electronics and Drive Systems (Vol. 1, pp. 315-321)

Minimum requirements of motor vector control modeling and simulation utilizing C MEX S-function in MATLAB/SIMULINK. / Yusivar, F.; Wakao, Shinji.

Proceedings of the International Conference on Power Electronics and Drive Systems. Vol. 1 2001. p. 315-321.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Yusivar, F & Wakao, S 2001, Minimum requirements of motor vector control modeling and simulation utilizing C MEX S-function in MATLAB/SIMULINK. in Proceedings of the International Conference on Power Electronics and Drive Systems. vol. 1, pp. 315-321, 4th IEEE International Conference on Power Electronics and Drive Systems, Denpassar, Bali, 01/10/22.
Yusivar F, Wakao S. Minimum requirements of motor vector control modeling and simulation utilizing C MEX S-function in MATLAB/SIMULINK. In Proceedings of the International Conference on Power Electronics and Drive Systems. Vol. 1. 2001. p. 315-321
Yusivar, F. ; Wakao, Shinji. / Minimum requirements of motor vector control modeling and simulation utilizing C MEX S-function in MATLAB/SIMULINK. Proceedings of the International Conference on Power Electronics and Drive Systems. Vol. 1 2001. pp. 315-321
@inproceedings{36e1dff4dc7e4e02a0e1897ad1d47aeb,
title = "Minimum requirements of motor vector control modeling and simulation utilizing C MEX S-function in MATLAB/SIMULINK",
abstract = "This paper describes a simple way to utilize C MEX S-function in MATLAB/SIMULINK for motor vector control modeling and simulation purposes. C MEX S-function is a powerful block in SIMULINK that capable to describe a dynamic system written in C language and linked into MATLAB. Basically it is categorized into three minimum structures. It is possible to model and simulate a vector-controlled motor drive with only using combination of these structures. A memory block is used for eliminating an algebraic loop so that speeding up the simulation. Simulation results will be compared with experimental ones for validation.",
keywords = "Induction machines, Matlab, Modeling, Simulation, Simulink, Vector control",
author = "F. Yusivar and Shinji Wakao",
year = "2001",
language = "English",
volume = "1",
pages = "315--321",
booktitle = "Proceedings of the International Conference on Power Electronics and Drive Systems",

}

TY - GEN

T1 - Minimum requirements of motor vector control modeling and simulation utilizing C MEX S-function in MATLAB/SIMULINK

AU - Yusivar, F.

AU - Wakao, Shinji

PY - 2001

Y1 - 2001

N2 - This paper describes a simple way to utilize C MEX S-function in MATLAB/SIMULINK for motor vector control modeling and simulation purposes. C MEX S-function is a powerful block in SIMULINK that capable to describe a dynamic system written in C language and linked into MATLAB. Basically it is categorized into three minimum structures. It is possible to model and simulate a vector-controlled motor drive with only using combination of these structures. A memory block is used for eliminating an algebraic loop so that speeding up the simulation. Simulation results will be compared with experimental ones for validation.

AB - This paper describes a simple way to utilize C MEX S-function in MATLAB/SIMULINK for motor vector control modeling and simulation purposes. C MEX S-function is a powerful block in SIMULINK that capable to describe a dynamic system written in C language and linked into MATLAB. Basically it is categorized into three minimum structures. It is possible to model and simulate a vector-controlled motor drive with only using combination of these structures. A memory block is used for eliminating an algebraic loop so that speeding up the simulation. Simulation results will be compared with experimental ones for validation.

KW - Induction machines

KW - Matlab

KW - Modeling

KW - Simulation

KW - Simulink

KW - Vector control

UR - http://www.scopus.com/inward/record.url?scp=0035744208&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0035744208&partnerID=8YFLogxK

M3 - Conference contribution

VL - 1

SP - 315

EP - 321

BT - Proceedings of the International Conference on Power Electronics and Drive Systems

ER -