Moisture-curing kinetics of isocyanate prepolymer adhesives

Benjamin S. Lepene, Timothy Edward Long, Andrew Meyer, David E. Kranbuehl

Research output: Contribution to journalArticle

11 Citations (Scopus)

Abstract

The reaction between isocyanate-terminated prepolymers and atmospheric moisture produces urea linkages and results in a hydrogen-bonded network of linear high molecular weight polymers with adhesive properties. This study describes the synthesis of isocyanate-terminated prepolymers and investigates the use of in situ infrared spectroscopy as a technique for monitoring the chemistry of the polymerization reaction kinetics. In situ FTIR was successfully used as a means to monitor the residual isocyanate levels and the extent of the polymerization reaction. Frequency dependent dielectric sensing (FDEMS) using a thin, planar sensor has been used to monitor the reaction kinetics by monitoring changes in the mobility of ions in the reacting medium. A direct correlation of the extent of prepolymer cure was found using the normalized FTIR isocyanate absorbance spectrum and FDEMS imaginary permittivity at 500 Hz for the duration of the cure cycle. The results of this investigation demonstrate that FDEMS is an effective online method to monitor the extent of moisture cure in the bulk as well as in a coating or adhesive bondline.

Original languageEnglish
Pages (from-to)297-312
Number of pages16
JournalJournal of Adhesion
Volume78
Issue number4
DOIs
Publication statusPublished - 2002 Dec 1
Externally publishedYes

Fingerprint

prepolymers
Isocyanates
isocyanates
curing
Reaction kinetics
moisture
adhesives
Curing
Adhesives
Moisture
Polymerization
Kinetics
Monitoring
kinetics
Urea
Infrared spectroscopy
reaction kinetics
Permittivity
polymerization
Molecular weight

Keywords

  • Cure monitoring
  • Frequency dependent dielectric sensing (FDEMS)
  • Isocyanate
  • Moisture cure adhesives

ASJC Scopus subject areas

  • Chemistry(all)
  • Mechanics of Materials
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Materials Chemistry

Cite this

Lepene, B. S., Long, T. E., Meyer, A., & Kranbuehl, D. E. (2002). Moisture-curing kinetics of isocyanate prepolymer adhesives. Journal of Adhesion, 78(4), 297-312. https://doi.org/10.1080/00218460210934

Moisture-curing kinetics of isocyanate prepolymer adhesives. / Lepene, Benjamin S.; Long, Timothy Edward; Meyer, Andrew; Kranbuehl, David E.

In: Journal of Adhesion, Vol. 78, No. 4, 01.12.2002, p. 297-312.

Research output: Contribution to journalArticle

Lepene, BS, Long, TE, Meyer, A & Kranbuehl, DE 2002, 'Moisture-curing kinetics of isocyanate prepolymer adhesives', Journal of Adhesion, vol. 78, no. 4, pp. 297-312. https://doi.org/10.1080/00218460210934
Lepene, Benjamin S. ; Long, Timothy Edward ; Meyer, Andrew ; Kranbuehl, David E. / Moisture-curing kinetics of isocyanate prepolymer adhesives. In: Journal of Adhesion. 2002 ; Vol. 78, No. 4. pp. 297-312.
@article{c6f671cc67c34f188dc511c19a98ceef,
title = "Moisture-curing kinetics of isocyanate prepolymer adhesives",
abstract = "The reaction between isocyanate-terminated prepolymers and atmospheric moisture produces urea linkages and results in a hydrogen-bonded network of linear high molecular weight polymers with adhesive properties. This study describes the synthesis of isocyanate-terminated prepolymers and investigates the use of in situ infrared spectroscopy as a technique for monitoring the chemistry of the polymerization reaction kinetics. In situ FTIR was successfully used as a means to monitor the residual isocyanate levels and the extent of the polymerization reaction. Frequency dependent dielectric sensing (FDEMS) using a thin, planar sensor has been used to monitor the reaction kinetics by monitoring changes in the mobility of ions in the reacting medium. A direct correlation of the extent of prepolymer cure was found using the normalized FTIR isocyanate absorbance spectrum and FDEMS imaginary permittivity at 500 Hz for the duration of the cure cycle. The results of this investigation demonstrate that FDEMS is an effective online method to monitor the extent of moisture cure in the bulk as well as in a coating or adhesive bondline.",
keywords = "Cure monitoring, Frequency dependent dielectric sensing (FDEMS), Isocyanate, Moisture cure adhesives",
author = "Lepene, {Benjamin S.} and Long, {Timothy Edward} and Andrew Meyer and Kranbuehl, {David E.}",
year = "2002",
month = "12",
day = "1",
doi = "10.1080/00218460210934",
language = "English",
volume = "78",
pages = "297--312",
journal = "Journal of Adhesion",
issn = "0021-8464",
publisher = "Taylor and Francis Ltd.",
number = "4",

}

TY - JOUR

T1 - Moisture-curing kinetics of isocyanate prepolymer adhesives

AU - Lepene, Benjamin S.

AU - Long, Timothy Edward

AU - Meyer, Andrew

AU - Kranbuehl, David E.

PY - 2002/12/1

Y1 - 2002/12/1

N2 - The reaction between isocyanate-terminated prepolymers and atmospheric moisture produces urea linkages and results in a hydrogen-bonded network of linear high molecular weight polymers with adhesive properties. This study describes the synthesis of isocyanate-terminated prepolymers and investigates the use of in situ infrared spectroscopy as a technique for monitoring the chemistry of the polymerization reaction kinetics. In situ FTIR was successfully used as a means to monitor the residual isocyanate levels and the extent of the polymerization reaction. Frequency dependent dielectric sensing (FDEMS) using a thin, planar sensor has been used to monitor the reaction kinetics by monitoring changes in the mobility of ions in the reacting medium. A direct correlation of the extent of prepolymer cure was found using the normalized FTIR isocyanate absorbance spectrum and FDEMS imaginary permittivity at 500 Hz for the duration of the cure cycle. The results of this investigation demonstrate that FDEMS is an effective online method to monitor the extent of moisture cure in the bulk as well as in a coating or adhesive bondline.

AB - The reaction between isocyanate-terminated prepolymers and atmospheric moisture produces urea linkages and results in a hydrogen-bonded network of linear high molecular weight polymers with adhesive properties. This study describes the synthesis of isocyanate-terminated prepolymers and investigates the use of in situ infrared spectroscopy as a technique for monitoring the chemistry of the polymerization reaction kinetics. In situ FTIR was successfully used as a means to monitor the residual isocyanate levels and the extent of the polymerization reaction. Frequency dependent dielectric sensing (FDEMS) using a thin, planar sensor has been used to monitor the reaction kinetics by monitoring changes in the mobility of ions in the reacting medium. A direct correlation of the extent of prepolymer cure was found using the normalized FTIR isocyanate absorbance spectrum and FDEMS imaginary permittivity at 500 Hz for the duration of the cure cycle. The results of this investigation demonstrate that FDEMS is an effective online method to monitor the extent of moisture cure in the bulk as well as in a coating or adhesive bondline.

KW - Cure monitoring

KW - Frequency dependent dielectric sensing (FDEMS)

KW - Isocyanate

KW - Moisture cure adhesives

UR - http://www.scopus.com/inward/record.url?scp=0041622767&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0041622767&partnerID=8YFLogxK

U2 - 10.1080/00218460210934

DO - 10.1080/00218460210934

M3 - Article

AN - SCOPUS:0041622767

VL - 78

SP - 297

EP - 312

JO - Journal of Adhesion

JF - Journal of Adhesion

SN - 0021-8464

IS - 4

ER -