Novel Pretreatment Process of Critical Metals Bearing E-Scrap By Using Electric Pulse Disintegration

Shuji Owada, Ryo Suzuki, Yuki Kamata, Takashi Nakamura

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

Recovering various metals, involving minor rare metals, from electronic devices is important for conserving resources and establishing a sustainable society. This paper describes an economically feasible and radical process for such recovery, especially, for Ta concentration from printed circuit boards (PCBs) which is the two-stage electric pulse disintegration (ED) process. Ta capacitors are detached from the PCBs in the first stage, and the sintered Ta contained within the capacitors is liberated from the capacitor in the second stage. It has been indicated that as much as 100% of Ta capacitors was detached from PCBs in nondestructive form in the first stage of ED and that 95% of sintered Ta and MnO 2 phases was liberated from covered plastics, which is much higher than the 46% detachment achieved when using mechanical roll crusher. The detailed detachment and liberation mechanisms of both stages were also described, and an upper limit of the solution’s conductivity in the second-stage ED was indicated.

Original languageEnglish
Pages (from-to)157-162
Number of pages6
JournalJournal of Sustainable Metallurgy
Volume4
Issue number2
DOIs
Publication statusPublished - 2018 Jun 1

Fingerprint

Bearings (structural)
Disintegration
Capacitors
Metals
Printed circuit boards
metal
conductivity
plastic
Crushers
resource
Plastics
Recovery

Keywords

  • Detachment
  • Electric pulse disintegration
  • Liberation
  • Printed circuit board
  • Ta capacitor

ASJC Scopus subject areas

  • Metals and Alloys
  • Mechanics of Materials
  • Environmental Science (miscellaneous)

Cite this

Novel Pretreatment Process of Critical Metals Bearing E-Scrap By Using Electric Pulse Disintegration. / Owada, Shuji; Suzuki, Ryo; Kamata, Yuki; Nakamura, Takashi.

In: Journal of Sustainable Metallurgy, Vol. 4, No. 2, 01.06.2018, p. 157-162.

Research output: Contribution to journalArticle

@article{58862220dc184977a9a2a37a4ac835bf,
title = "Novel Pretreatment Process of Critical Metals Bearing E-Scrap By Using Electric Pulse Disintegration",
abstract = "Recovering various metals, involving minor rare metals, from electronic devices is important for conserving resources and establishing a sustainable society. This paper describes an economically feasible and radical process for such recovery, especially, for Ta concentration from printed circuit boards (PCBs) which is the two-stage electric pulse disintegration (ED) process. Ta capacitors are detached from the PCBs in the first stage, and the sintered Ta contained within the capacitors is liberated from the capacitor in the second stage. It has been indicated that as much as 100{\%} of Ta capacitors was detached from PCBs in nondestructive form in the first stage of ED and that 95{\%} of sintered Ta and MnO 2 phases was liberated from covered plastics, which is much higher than the 46{\%} detachment achieved when using mechanical roll crusher. The detailed detachment and liberation mechanisms of both stages were also described, and an upper limit of the solution’s conductivity in the second-stage ED was indicated.",
keywords = "Detachment, Electric pulse disintegration, Liberation, Printed circuit board, Ta capacitor",
author = "Shuji Owada and Ryo Suzuki and Yuki Kamata and Takashi Nakamura",
year = "2018",
month = "6",
day = "1",
doi = "10.1007/s40831-018-0170-8",
language = "English",
volume = "4",
pages = "157--162",
journal = "Journal of Sustainable Metallurgy",
issn = "2199-3823",
publisher = "Springer International Publishing AG",
number = "2",

}

TY - JOUR

T1 - Novel Pretreatment Process of Critical Metals Bearing E-Scrap By Using Electric Pulse Disintegration

AU - Owada, Shuji

AU - Suzuki, Ryo

AU - Kamata, Yuki

AU - Nakamura, Takashi

PY - 2018/6/1

Y1 - 2018/6/1

N2 - Recovering various metals, involving minor rare metals, from electronic devices is important for conserving resources and establishing a sustainable society. This paper describes an economically feasible and radical process for such recovery, especially, for Ta concentration from printed circuit boards (PCBs) which is the two-stage electric pulse disintegration (ED) process. Ta capacitors are detached from the PCBs in the first stage, and the sintered Ta contained within the capacitors is liberated from the capacitor in the second stage. It has been indicated that as much as 100% of Ta capacitors was detached from PCBs in nondestructive form in the first stage of ED and that 95% of sintered Ta and MnO 2 phases was liberated from covered plastics, which is much higher than the 46% detachment achieved when using mechanical roll crusher. The detailed detachment and liberation mechanisms of both stages were also described, and an upper limit of the solution’s conductivity in the second-stage ED was indicated.

AB - Recovering various metals, involving minor rare metals, from electronic devices is important for conserving resources and establishing a sustainable society. This paper describes an economically feasible and radical process for such recovery, especially, for Ta concentration from printed circuit boards (PCBs) which is the two-stage electric pulse disintegration (ED) process. Ta capacitors are detached from the PCBs in the first stage, and the sintered Ta contained within the capacitors is liberated from the capacitor in the second stage. It has been indicated that as much as 100% of Ta capacitors was detached from PCBs in nondestructive form in the first stage of ED and that 95% of sintered Ta and MnO 2 phases was liberated from covered plastics, which is much higher than the 46% detachment achieved when using mechanical roll crusher. The detailed detachment and liberation mechanisms of both stages were also described, and an upper limit of the solution’s conductivity in the second-stage ED was indicated.

KW - Detachment

KW - Electric pulse disintegration

KW - Liberation

KW - Printed circuit board

KW - Ta capacitor

UR - http://www.scopus.com/inward/record.url?scp=85064182383&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85064182383&partnerID=8YFLogxK

U2 - 10.1007/s40831-018-0170-8

DO - 10.1007/s40831-018-0170-8

M3 - Article

VL - 4

SP - 157

EP - 162

JO - Journal of Sustainable Metallurgy

JF - Journal of Sustainable Metallurgy

SN - 2199-3823

IS - 2

ER -