Numerical simulation of critical current performance in nb3sn strand subjected to periodic bending deformation

Haruyuki Murakami, Hiroshi Ueda, Atsushi Ishiyama, Norikiyo Koizumi, Kiyoshi Okuno

    Research output: Contribution to journalArticle

    1 Citation (Scopus)

    Abstract

    In the ITER Engineering Design Activity (EDA), four NB3Sn model coils were developed and successfully tested. However, it was revealed that the critical current of the conductor degraded with the increase of electromagnetic force. One of the explanations of this phenomenon is a strand bending caused by enormous electromagnetic force. The authors therefore developed a simulation code using the distributed circuit model to investigate dependency of the critical current performance on the periodic bending deformation. The simulation results were in good agreement with the experiments. The dependence of the critical current on the periodic transverse load, temperature, periodic load pitch, thickness of Ta barrier which prevents Cu stabilizer from being contaminated by Sn, twist pitch of the strand, and RRR of the bronze matrix was investigated using the developed code. The results showed that the critical current degraded less with decreasing the pitch of the transverse load and increasing the Ta barrier thickness. It suggests that the shorter cabling pitch and the larger bending stiffness prevent the critical current degradation.

    Original languageEnglish
    Pages (from-to)853-859
    Number of pages7
    JournalElectrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi)
    Volume171
    Issue number3
    DOIs
    Publication statusPublished - 2010 May

    Fingerprint

    Critical currents
    Computer simulation
    Bronze
    Stiffness
    Degradation
    Networks (circuits)
    Experiments
    Temperature

    Keywords

    • Bending strain
    • CIC conductor
    • Critical current
    • Degradation
    • NbSn

    ASJC Scopus subject areas

    • Electrical and Electronic Engineering
    • Energy Engineering and Power Technology

    Cite this

    Numerical simulation of critical current performance in nb3sn strand subjected to periodic bending deformation. / Murakami, Haruyuki; Ueda, Hiroshi; Ishiyama, Atsushi; Koizumi, Norikiyo; Okuno, Kiyoshi.

    In: Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi), Vol. 171, No. 3, 05.2010, p. 853-859.

    Research output: Contribution to journalArticle

    @article{9a6fd52a33954b65b8967e08f8459b3a,
    title = "Numerical simulation of critical current performance in nb3sn strand subjected to periodic bending deformation",
    abstract = "In the ITER Engineering Design Activity (EDA), four NB3Sn model coils were developed and successfully tested. However, it was revealed that the critical current of the conductor degraded with the increase of electromagnetic force. One of the explanations of this phenomenon is a strand bending caused by enormous electromagnetic force. The authors therefore developed a simulation code using the distributed circuit model to investigate dependency of the critical current performance on the periodic bending deformation. The simulation results were in good agreement with the experiments. The dependence of the critical current on the periodic transverse load, temperature, periodic load pitch, thickness of Ta barrier which prevents Cu stabilizer from being contaminated by Sn, twist pitch of the strand, and RRR of the bronze matrix was investigated using the developed code. The results showed that the critical current degraded less with decreasing the pitch of the transverse load and increasing the Ta barrier thickness. It suggests that the shorter cabling pitch and the larger bending stiffness prevent the critical current degradation.",
    keywords = "Bending strain, CIC conductor, Critical current, Degradation, NbSn",
    author = "Haruyuki Murakami and Hiroshi Ueda and Atsushi Ishiyama and Norikiyo Koizumi and Kiyoshi Okuno",
    year = "2010",
    month = "5",
    doi = "10.1002/eej.20923",
    language = "English",
    volume = "171",
    pages = "853--859",
    journal = "Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi)",
    issn = "0424-7760",
    publisher = "John Wiley and Sons Inc.",
    number = "3",

    }

    TY - JOUR

    T1 - Numerical simulation of critical current performance in nb3sn strand subjected to periodic bending deformation

    AU - Murakami, Haruyuki

    AU - Ueda, Hiroshi

    AU - Ishiyama, Atsushi

    AU - Koizumi, Norikiyo

    AU - Okuno, Kiyoshi

    PY - 2010/5

    Y1 - 2010/5

    N2 - In the ITER Engineering Design Activity (EDA), four NB3Sn model coils were developed and successfully tested. However, it was revealed that the critical current of the conductor degraded with the increase of electromagnetic force. One of the explanations of this phenomenon is a strand bending caused by enormous electromagnetic force. The authors therefore developed a simulation code using the distributed circuit model to investigate dependency of the critical current performance on the periodic bending deformation. The simulation results were in good agreement with the experiments. The dependence of the critical current on the periodic transverse load, temperature, periodic load pitch, thickness of Ta barrier which prevents Cu stabilizer from being contaminated by Sn, twist pitch of the strand, and RRR of the bronze matrix was investigated using the developed code. The results showed that the critical current degraded less with decreasing the pitch of the transverse load and increasing the Ta barrier thickness. It suggests that the shorter cabling pitch and the larger bending stiffness prevent the critical current degradation.

    AB - In the ITER Engineering Design Activity (EDA), four NB3Sn model coils were developed and successfully tested. However, it was revealed that the critical current of the conductor degraded with the increase of electromagnetic force. One of the explanations of this phenomenon is a strand bending caused by enormous electromagnetic force. The authors therefore developed a simulation code using the distributed circuit model to investigate dependency of the critical current performance on the periodic bending deformation. The simulation results were in good agreement with the experiments. The dependence of the critical current on the periodic transverse load, temperature, periodic load pitch, thickness of Ta barrier which prevents Cu stabilizer from being contaminated by Sn, twist pitch of the strand, and RRR of the bronze matrix was investigated using the developed code. The results showed that the critical current degraded less with decreasing the pitch of the transverse load and increasing the Ta barrier thickness. It suggests that the shorter cabling pitch and the larger bending stiffness prevent the critical current degradation.

    KW - Bending strain

    KW - CIC conductor

    KW - Critical current

    KW - Degradation

    KW - NbSn

    UR - http://www.scopus.com/inward/record.url?scp=77449141077&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=77449141077&partnerID=8YFLogxK

    U2 - 10.1002/eej.20923

    DO - 10.1002/eej.20923

    M3 - Article

    VL - 171

    SP - 853

    EP - 859

    JO - Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi)

    JF - Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi)

    SN - 0424-7760

    IS - 3

    ER -