Observer-based excitation control of turbine-generator shaft oscillation

T. Kakinoki, R. Yokoyama, G. Fujita, K. Koyanagi, T. Funabashi

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Abstract

    During disturbances in power system, turbine-generator shall are subjected to mechanical stress caused by severe torsional torques. Shaft torque is proportional to the shaft twist, which is caused by angle difference between both ends. However, observing the angle difference in au actual generation system is difficult technically. On the other hand, e measuring rotational speed of the shaft ends is relatively easy. Then if the shaft torque could be estimated effectively, it would be used in order to control the rotational speed for shaft torque reduction. This paper proposes a shaft torque excitation control for rotating machine by making use of an observer for the shaft torque. Firstly, the relationship between the observation signals and the accuracy of the estimation are discussed, and secondly a shaft torque reduction control systems developed by using the excitation control based on the estimate by identity observer. An in-house 7-mass system comprised of joints, shear-pins, and an exciter is used for the test model and Park's equation for synchronous machine is employed. The controller is established by feeding hack the error between the target output and the observer output. Linear quadratic regulator theory (LQR) is employed to design the observer gain, which provides acceptable estimation.

    Original languageEnglish
    Title of host publicationProceedings of the IEEE Power Engineering Society Transmission and Distribution Conference
    Pages1225-1230
    Number of pages6
    Volume2
    Publication statusPublished - 2002
    Event2002 IEEE Power Engineering Society Winter Meeting - New York, NY
    Duration: 2002 Jan 272002 Jan 31

    Other

    Other2002 IEEE Power Engineering Society Winter Meeting
    CityNew York, NY
    Period02/1/2702/1/31

    Fingerprint

    Turbogenerators
    Torque
    Control systems
    Controllers

    Keywords

    • AVR
    • LQR
    • Observer
    • Reclose timing
    • Torque estimation
    • Torsional shaft torque

    ASJC Scopus subject areas

    • Energy(all)
    • Engineering(all)

    Cite this

    Kakinoki, T., Yokoyama, R., Fujita, G., Koyanagi, K., & Funabashi, T. (2002). Observer-based excitation control of turbine-generator shaft oscillation. In Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference (Vol. 2, pp. 1225-1230)

    Observer-based excitation control of turbine-generator shaft oscillation. / Kakinoki, T.; Yokoyama, R.; Fujita, G.; Koyanagi, K.; Funabashi, T.

    Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference. Vol. 2 2002. p. 1225-1230.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Kakinoki, T, Yokoyama, R, Fujita, G, Koyanagi, K & Funabashi, T 2002, Observer-based excitation control of turbine-generator shaft oscillation. in Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference. vol. 2, pp. 1225-1230, 2002 IEEE Power Engineering Society Winter Meeting, New York, NY, 02/1/27.
    Kakinoki T, Yokoyama R, Fujita G, Koyanagi K, Funabashi T. Observer-based excitation control of turbine-generator shaft oscillation. In Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference. Vol. 2. 2002. p. 1225-1230
    Kakinoki, T. ; Yokoyama, R. ; Fujita, G. ; Koyanagi, K. ; Funabashi, T. / Observer-based excitation control of turbine-generator shaft oscillation. Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference. Vol. 2 2002. pp. 1225-1230
    @inproceedings{e61163eaaadc44ed8e8097686299c866,
    title = "Observer-based excitation control of turbine-generator shaft oscillation",
    abstract = "During disturbances in power system, turbine-generator shall are subjected to mechanical stress caused by severe torsional torques. Shaft torque is proportional to the shaft twist, which is caused by angle difference between both ends. However, observing the angle difference in au actual generation system is difficult technically. On the other hand, e measuring rotational speed of the shaft ends is relatively easy. Then if the shaft torque could be estimated effectively, it would be used in order to control the rotational speed for shaft torque reduction. This paper proposes a shaft torque excitation control for rotating machine by making use of an observer for the shaft torque. Firstly, the relationship between the observation signals and the accuracy of the estimation are discussed, and secondly a shaft torque reduction control systems developed by using the excitation control based on the estimate by identity observer. An in-house 7-mass system comprised of joints, shear-pins, and an exciter is used for the test model and Park's equation for synchronous machine is employed. The controller is established by feeding hack the error between the target output and the observer output. Linear quadratic regulator theory (LQR) is employed to design the observer gain, which provides acceptable estimation.",
    keywords = "AVR, LQR, Observer, Reclose timing, Torque estimation, Torsional shaft torque",
    author = "T. Kakinoki and R. Yokoyama and G. Fujita and K. Koyanagi and T. Funabashi",
    year = "2002",
    language = "English",
    volume = "2",
    pages = "1225--1230",
    booktitle = "Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference",

    }

    TY - GEN

    T1 - Observer-based excitation control of turbine-generator shaft oscillation

    AU - Kakinoki, T.

    AU - Yokoyama, R.

    AU - Fujita, G.

    AU - Koyanagi, K.

    AU - Funabashi, T.

    PY - 2002

    Y1 - 2002

    N2 - During disturbances in power system, turbine-generator shall are subjected to mechanical stress caused by severe torsional torques. Shaft torque is proportional to the shaft twist, which is caused by angle difference between both ends. However, observing the angle difference in au actual generation system is difficult technically. On the other hand, e measuring rotational speed of the shaft ends is relatively easy. Then if the shaft torque could be estimated effectively, it would be used in order to control the rotational speed for shaft torque reduction. This paper proposes a shaft torque excitation control for rotating machine by making use of an observer for the shaft torque. Firstly, the relationship between the observation signals and the accuracy of the estimation are discussed, and secondly a shaft torque reduction control systems developed by using the excitation control based on the estimate by identity observer. An in-house 7-mass system comprised of joints, shear-pins, and an exciter is used for the test model and Park's equation for synchronous machine is employed. The controller is established by feeding hack the error between the target output and the observer output. Linear quadratic regulator theory (LQR) is employed to design the observer gain, which provides acceptable estimation.

    AB - During disturbances in power system, turbine-generator shall are subjected to mechanical stress caused by severe torsional torques. Shaft torque is proportional to the shaft twist, which is caused by angle difference between both ends. However, observing the angle difference in au actual generation system is difficult technically. On the other hand, e measuring rotational speed of the shaft ends is relatively easy. Then if the shaft torque could be estimated effectively, it would be used in order to control the rotational speed for shaft torque reduction. This paper proposes a shaft torque excitation control for rotating machine by making use of an observer for the shaft torque. Firstly, the relationship between the observation signals and the accuracy of the estimation are discussed, and secondly a shaft torque reduction control systems developed by using the excitation control based on the estimate by identity observer. An in-house 7-mass system comprised of joints, shear-pins, and an exciter is used for the test model and Park's equation for synchronous machine is employed. The controller is established by feeding hack the error between the target output and the observer output. Linear quadratic regulator theory (LQR) is employed to design the observer gain, which provides acceptable estimation.

    KW - AVR

    KW - LQR

    KW - Observer

    KW - Reclose timing

    KW - Torque estimation

    KW - Torsional shaft torque

    UR - http://www.scopus.com/inward/record.url?scp=0036088235&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=0036088235&partnerID=8YFLogxK

    M3 - Conference contribution

    AN - SCOPUS:0036088235

    VL - 2

    SP - 1225

    EP - 1230

    BT - Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference

    ER -