Open controller architecture - Past, present and future

G. Pritschow, Y. Altintas, F. Jovane, Y. Koren, M. Mitsuishi, Shozo Takata, H. Van Brussel, M. Weck, K. Yamazaki

Research output: Contribution to journalArticle

156 Citations (Scopus)

Abstract

Open Control Systems are the key enabler for the realization of modular and re-configurable manufacturing systems. The large number of special purpose machines and the high level of automation have led to an increasing importance of open control systems based on vendor neutral standards. This paper gives an overview on the past, present and future of Open Controller Architecture. After reflecting onthe different criteria, categories and characteristics of open controllers in general, the CNC products in the market are evaluated and an overview on the world-wide research activities in Europe, North America and Japan is given. Subsequently the efforts to harmonize the different results are described in order to establish e common world-wide standard in the future. Due to the "mix-and-match" nature of open controllers concentrated attention must be paid to testing mechanisms in the form of conformance and interoperability tests.

Original languageEnglish
Pages (from-to)463-470
Number of pages8
JournalCIRP Annals - Manufacturing Technology
Volume50
Issue number2
Publication statusPublished - 2001
Externally publishedYes

    Fingerprint

Keywords

  • CNC
  • Machine tool
  • Open architecture control

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering

Cite this

Pritschow, G., Altintas, Y., Jovane, F., Koren, Y., Mitsuishi, M., Takata, S., Van Brussel, H., Weck, M., & Yamazaki, K. (2001). Open controller architecture - Past, present and future. CIRP Annals - Manufacturing Technology, 50(2), 463-470.