Ozone generation in plasma actuator

Hiroyuki Kawamoto, Toshimitsu Kobayashi

    Research output: Contribution to journalArticle

    3 Citations (Scopus)

    Abstract

    The generation of ozone in the plasma actuator that consists of simple parallel line electrodes separated by a thin dielectric layer was evaluated at the frequency less than 1000 Hz. It was measured that the ozone generation was increased under the conditions of high applied voltage and high frequency but irrelevant to the gap between the electrodes. The measured ozone concentration under the conditions of 6 kV -1000 Hz applied voltage and 1.5 liter/min flow rate was approximately 100 ppm, which is much higher than the human safety standard value of 0.1 ppm.

    Original languageEnglish
    Pages (from-to)2345-2347
    Number of pages3
    JournalNihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B
    Volume75
    Issue number759
    Publication statusPublished - 2009 Nov

    Keywords

    • Dielectric barrier discharge
    • Ozone
    • Plasma actuator

    ASJC Scopus subject areas

    • Mechanical Engineering
    • Condensed Matter Physics

    Fingerprint Dive into the research topics of 'Ozone generation in plasma actuator'. Together they form a unique fingerprint.

  • Cite this