Phenoxy radical-substituted polythiophene/gold nanoparticle alternate network film and its conductive characteristics

Manabu Tanaka, Remi Fujita, Yusuke Saito, Hiroyuki Nishide

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Combination of the polythiophene and a gold nano-particle with Au-S bonds is expected to measure electric conductivity of the polymer main chain excluding any influence of electron hopping transfer between the chains. Thiol- or boronic acid-terminated polythiophenes were synthesized via polycondensation and the following coupling reactions to the end of the polymer chain. Gold nano-particles chemisorbed with surfactant or aromatic thiol bearing reactive group were also prepared. The sizes and properties of the gold nano-particles were characterized with TEM, TG-DTA, and so on. The complex film was obtained by mixing the polythiophene and the gold nano-particles. TEM and XPS results indicated the formation of the alternate network film with the polythiophene and the gold nano-particles. Electric conductivity of the polythiophene/gold nano-particle complex film measured with micro comb-shape electrodes had higher conductivity than that of the polymer.

Original languageEnglish
Title of host publicationPolymer Preprints, Japan
Pages3805-3806
Number of pages2
Volume55
Edition2
Publication statusPublished - 2006
Event55th Society of Polymer Science Japan Symposium on Macromolecules - Toyama
Duration: 2006 Sep 202006 Sep 22

Other

Other55th Society of Polymer Science Japan Symposium on Macromolecules
CityToyama
Period06/9/2006/9/22

Fingerprint

Gold
Nanoparticles
Polymers
Bearings (structural)
Transmission electron microscopy
Electric conductivity
Polycondensation
Differential thermal analysis
Surface active agents
X ray photoelectron spectroscopy
Electrodes
Acids
Electrons

Keywords

  • Conductive characteristic
  • Gold nanoparticle
  • Gold-thiol
  • Phenoxy radical
  • Polythiophene

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Tanaka, M., Fujita, R., Saito, Y., & Nishide, H. (2006). Phenoxy radical-substituted polythiophene/gold nanoparticle alternate network film and its conductive characteristics. In Polymer Preprints, Japan (2 ed., Vol. 55, pp. 3805-3806)

Phenoxy radical-substituted polythiophene/gold nanoparticle alternate network film and its conductive characteristics. / Tanaka, Manabu; Fujita, Remi; Saito, Yusuke; Nishide, Hiroyuki.

Polymer Preprints, Japan. Vol. 55 2. ed. 2006. p. 3805-3806.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tanaka, M, Fujita, R, Saito, Y & Nishide, H 2006, Phenoxy radical-substituted polythiophene/gold nanoparticle alternate network film and its conductive characteristics. in Polymer Preprints, Japan. 2 edn, vol. 55, pp. 3805-3806, 55th Society of Polymer Science Japan Symposium on Macromolecules, Toyama, 06/9/20.
Tanaka M, Fujita R, Saito Y, Nishide H. Phenoxy radical-substituted polythiophene/gold nanoparticle alternate network film and its conductive characteristics. In Polymer Preprints, Japan. 2 ed. Vol. 55. 2006. p. 3805-3806
Tanaka, Manabu ; Fujita, Remi ; Saito, Yusuke ; Nishide, Hiroyuki. / Phenoxy radical-substituted polythiophene/gold nanoparticle alternate network film and its conductive characteristics. Polymer Preprints, Japan. Vol. 55 2. ed. 2006. pp. 3805-3806
@inproceedings{001c656b2a974cf9af34b212751a5103,
title = "Phenoxy radical-substituted polythiophene/gold nanoparticle alternate network film and its conductive characteristics",
abstract = "Combination of the polythiophene and a gold nano-particle with Au-S bonds is expected to measure electric conductivity of the polymer main chain excluding any influence of electron hopping transfer between the chains. Thiol- or boronic acid-terminated polythiophenes were synthesized via polycondensation and the following coupling reactions to the end of the polymer chain. Gold nano-particles chemisorbed with surfactant or aromatic thiol bearing reactive group were also prepared. The sizes and properties of the gold nano-particles were characterized with TEM, TG-DTA, and so on. The complex film was obtained by mixing the polythiophene and the gold nano-particles. TEM and XPS results indicated the formation of the alternate network film with the polythiophene and the gold nano-particles. Electric conductivity of the polythiophene/gold nano-particle complex film measured with micro comb-shape electrodes had higher conductivity than that of the polymer.",
keywords = "Conductive characteristic, Gold nanoparticle, Gold-thiol, Phenoxy radical, Polythiophene",
author = "Manabu Tanaka and Remi Fujita and Yusuke Saito and Hiroyuki Nishide",
year = "2006",
language = "English",
volume = "55",
pages = "3805--3806",
booktitle = "Polymer Preprints, Japan",
edition = "2",

}

TY - GEN

T1 - Phenoxy radical-substituted polythiophene/gold nanoparticle alternate network film and its conductive characteristics

AU - Tanaka, Manabu

AU - Fujita, Remi

AU - Saito, Yusuke

AU - Nishide, Hiroyuki

PY - 2006

Y1 - 2006

N2 - Combination of the polythiophene and a gold nano-particle with Au-S bonds is expected to measure electric conductivity of the polymer main chain excluding any influence of electron hopping transfer between the chains. Thiol- or boronic acid-terminated polythiophenes were synthesized via polycondensation and the following coupling reactions to the end of the polymer chain. Gold nano-particles chemisorbed with surfactant or aromatic thiol bearing reactive group were also prepared. The sizes and properties of the gold nano-particles were characterized with TEM, TG-DTA, and so on. The complex film was obtained by mixing the polythiophene and the gold nano-particles. TEM and XPS results indicated the formation of the alternate network film with the polythiophene and the gold nano-particles. Electric conductivity of the polythiophene/gold nano-particle complex film measured with micro comb-shape electrodes had higher conductivity than that of the polymer.

AB - Combination of the polythiophene and a gold nano-particle with Au-S bonds is expected to measure electric conductivity of the polymer main chain excluding any influence of electron hopping transfer between the chains. Thiol- or boronic acid-terminated polythiophenes were synthesized via polycondensation and the following coupling reactions to the end of the polymer chain. Gold nano-particles chemisorbed with surfactant or aromatic thiol bearing reactive group were also prepared. The sizes and properties of the gold nano-particles were characterized with TEM, TG-DTA, and so on. The complex film was obtained by mixing the polythiophene and the gold nano-particles. TEM and XPS results indicated the formation of the alternate network film with the polythiophene and the gold nano-particles. Electric conductivity of the polythiophene/gold nano-particle complex film measured with micro comb-shape electrodes had higher conductivity than that of the polymer.

KW - Conductive characteristic

KW - Gold nanoparticle

KW - Gold-thiol

KW - Phenoxy radical

KW - Polythiophene

UR - http://www.scopus.com/inward/record.url?scp=33846153581&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33846153581&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:33846153581

VL - 55

SP - 3805

EP - 3806

BT - Polymer Preprints, Japan

ER -