Polymer brushes by anionic and cationic surface-initiated polymerization (SIP)

Rigoberto Advincula

Research output: Contribution to journalReview article

71 Citations (Scopus)

Abstract

The formation of homopolymer and block copolymer brushes grafted from flat and nanoparticle surfaces via surface-initiated anionic and cationic polymerization methods is reviewed. Unique properties of these chain addition polymerization methods distinguish them from free-radical and living-radical methods, i.e., primarily the formation of charged reactive propagating centers. This involves the use of methods that preserve the reactivity of the charged species, where the monomer, solvent quality, and lack of terminating species allow for grafting to surfaces and for the formation of homopolymer and block copolymers. While these initiators are analogous to solution and bulk methods and adapted to surfaces, their mechanisms do not necessarily follow their counterparts. Several systems for surface-initiated polymerization (SIP) will be reviewed including early attempts at "grafting onto" and "grafting from" particles. For initiation, alkylsilane or alkylthiol anionic initiators are grafted onto planar and particle surfaces by self-assembled monolayer (SAM) techniques. For the cationic (carbocationic) polymerization methods, methods of tethering Lewis acids to surfaces have been reported. The grafted polymer chains can be investigated in situ using a number of surface-sensitive spectroscopic and microscopic techniques. They can also be analyzed ex situ when the polymer chains are removed from the substrate surface. Activation of the grafted initiator, control of polymerization conditions, and removal of excess activators are emphasized. Interesting differences in particle properties, morphology, thickness, grafting density, and polymerization conditions contrast anionic and cationic charged species from other SIP mechanisms. The problems and potential of these techniques will also be discussed. The formation of block copolymer sequences highlights a unique utility of living anionic and cationic polymerization techniques on surfaces.

Original languageEnglish
Pages (from-to)107-136
Number of pages30
JournalAdvances in Polymer Science
Volume197
Issue number1
DOIs
Publication statusPublished - 2006
Externally publishedYes

Fingerprint

Brushes
Polymers
Polymerization
Block copolymers
Homopolymerization
Lewis Acids
Self assembled monolayers
Free radicals
Free Radicals
Monomers
Chemical activation
Nanoparticles
Acids

Keywords

  • Anionic
  • Cationic
  • Initiator
  • Nanoparticles
  • Surface initiated polymerization

ASJC Scopus subject areas

  • Chemical Engineering(all)
  • Polymers and Plastics
  • Organic Chemistry

Cite this

Polymer brushes by anionic and cationic surface-initiated polymerization (SIP). / Advincula, Rigoberto.

In: Advances in Polymer Science, Vol. 197, No. 1, 2006, p. 107-136.

Research output: Contribution to journalReview article

@article{54147cc0eb09416e912098649e4d58d4,
title = "Polymer brushes by anionic and cationic surface-initiated polymerization (SIP)",
abstract = "The formation of homopolymer and block copolymer brushes grafted from flat and nanoparticle surfaces via surface-initiated anionic and cationic polymerization methods is reviewed. Unique properties of these chain addition polymerization methods distinguish them from free-radical and living-radical methods, i.e., primarily the formation of charged reactive propagating centers. This involves the use of methods that preserve the reactivity of the charged species, where the monomer, solvent quality, and lack of terminating species allow for grafting to surfaces and for the formation of homopolymer and block copolymers. While these initiators are analogous to solution and bulk methods and adapted to surfaces, their mechanisms do not necessarily follow their counterparts. Several systems for surface-initiated polymerization (SIP) will be reviewed including early attempts at {"}grafting onto{"} and {"}grafting from{"} particles. For initiation, alkylsilane or alkylthiol anionic initiators are grafted onto planar and particle surfaces by self-assembled monolayer (SAM) techniques. For the cationic (carbocationic) polymerization methods, methods of tethering Lewis acids to surfaces have been reported. The grafted polymer chains can be investigated in situ using a number of surface-sensitive spectroscopic and microscopic techniques. They can also be analyzed ex situ when the polymer chains are removed from the substrate surface. Activation of the grafted initiator, control of polymerization conditions, and removal of excess activators are emphasized. Interesting differences in particle properties, morphology, thickness, grafting density, and polymerization conditions contrast anionic and cationic charged species from other SIP mechanisms. The problems and potential of these techniques will also be discussed. The formation of block copolymer sequences highlights a unique utility of living anionic and cationic polymerization techniques on surfaces.",
keywords = "Anionic, Cationic, Initiator, Nanoparticles, Surface initiated polymerization",
author = "Rigoberto Advincula",
year = "2006",
doi = "10.1007/12_066",
language = "English",
volume = "197",
pages = "107--136",
journal = "Advances in Polymer Science",
issn = "0065-3195",
publisher = "Springer New York",
number = "1",

}

TY - JOUR

T1 - Polymer brushes by anionic and cationic surface-initiated polymerization (SIP)

AU - Advincula, Rigoberto

PY - 2006

Y1 - 2006

N2 - The formation of homopolymer and block copolymer brushes grafted from flat and nanoparticle surfaces via surface-initiated anionic and cationic polymerization methods is reviewed. Unique properties of these chain addition polymerization methods distinguish them from free-radical and living-radical methods, i.e., primarily the formation of charged reactive propagating centers. This involves the use of methods that preserve the reactivity of the charged species, where the monomer, solvent quality, and lack of terminating species allow for grafting to surfaces and for the formation of homopolymer and block copolymers. While these initiators are analogous to solution and bulk methods and adapted to surfaces, their mechanisms do not necessarily follow their counterparts. Several systems for surface-initiated polymerization (SIP) will be reviewed including early attempts at "grafting onto" and "grafting from" particles. For initiation, alkylsilane or alkylthiol anionic initiators are grafted onto planar and particle surfaces by self-assembled monolayer (SAM) techniques. For the cationic (carbocationic) polymerization methods, methods of tethering Lewis acids to surfaces have been reported. The grafted polymer chains can be investigated in situ using a number of surface-sensitive spectroscopic and microscopic techniques. They can also be analyzed ex situ when the polymer chains are removed from the substrate surface. Activation of the grafted initiator, control of polymerization conditions, and removal of excess activators are emphasized. Interesting differences in particle properties, morphology, thickness, grafting density, and polymerization conditions contrast anionic and cationic charged species from other SIP mechanisms. The problems and potential of these techniques will also be discussed. The formation of block copolymer sequences highlights a unique utility of living anionic and cationic polymerization techniques on surfaces.

AB - The formation of homopolymer and block copolymer brushes grafted from flat and nanoparticle surfaces via surface-initiated anionic and cationic polymerization methods is reviewed. Unique properties of these chain addition polymerization methods distinguish them from free-radical and living-radical methods, i.e., primarily the formation of charged reactive propagating centers. This involves the use of methods that preserve the reactivity of the charged species, where the monomer, solvent quality, and lack of terminating species allow for grafting to surfaces and for the formation of homopolymer and block copolymers. While these initiators are analogous to solution and bulk methods and adapted to surfaces, their mechanisms do not necessarily follow their counterparts. Several systems for surface-initiated polymerization (SIP) will be reviewed including early attempts at "grafting onto" and "grafting from" particles. For initiation, alkylsilane or alkylthiol anionic initiators are grafted onto planar and particle surfaces by self-assembled monolayer (SAM) techniques. For the cationic (carbocationic) polymerization methods, methods of tethering Lewis acids to surfaces have been reported. The grafted polymer chains can be investigated in situ using a number of surface-sensitive spectroscopic and microscopic techniques. They can also be analyzed ex situ when the polymer chains are removed from the substrate surface. Activation of the grafted initiator, control of polymerization conditions, and removal of excess activators are emphasized. Interesting differences in particle properties, morphology, thickness, grafting density, and polymerization conditions contrast anionic and cationic charged species from other SIP mechanisms. The problems and potential of these techniques will also be discussed. The formation of block copolymer sequences highlights a unique utility of living anionic and cationic polymerization techniques on surfaces.

KW - Anionic

KW - Cationic

KW - Initiator

KW - Nanoparticles

KW - Surface initiated polymerization

UR - http://www.scopus.com/inward/record.url?scp=33947229152&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33947229152&partnerID=8YFLogxK

U2 - 10.1007/12_066

DO - 10.1007/12_066

M3 - Review article

VL - 197

SP - 107

EP - 136

JO - Advances in Polymer Science

JF - Advances in Polymer Science

SN - 0065-3195

IS - 1

ER -