Printed high-frequency RF identification antenna on ultrathin polymer film by simple production process for soft-surface adhesive device

Hiroki Hayata, Marin Okamoto, Shinji Takeoka, Eiji Iwase, Toshinori Fujie, Hiroyasu Iwata

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

In this paper, we present a simple method for manufacturing electronic devices using ultrathin polymer films, and develop a high-frequency RF identification. To expand the market for flexible devices, it is important to enhance their adhesiveness and conformability to surfaces, to simplify their fabrication, and to reduce their cost. We developed a method to design an antenna for use on an operable RF identification whose wiring was subjected to commercially available inkjet or simple screen printing, and successfully fabricated the RF identification. By using ultrathin films made of polystyrene-block-polybutadiene-block-polystyrene (SBS) as substrates - less than 750 nm - the films could be attached to various surfaces, including soft surfaces, by van der Waals force and without using glue. We succeeded in the simple fabrication of an ultrathin RF identification including a commercial or simple printing process.

Original languageEnglish
Article number05EC01
JournalJapanese Journal of Applied Physics
Volume56
Issue number5
DOIs
Publication statusPublished - 2017 May 1

Fingerprint

Ultrathin films
Polymer films
adhesives
Adhesives
antennas
Antennas
printing
Polystyrenes
polystyrene
polymers
Fabrication
antenna design
polybutadiene
Van der Waals forces
fabrication
glues
Screen printing
wiring
Glues
Polybutadienes

ASJC Scopus subject areas

  • Engineering(all)
  • Physics and Astronomy(all)

Cite this

Printed high-frequency RF identification antenna on ultrathin polymer film by simple production process for soft-surface adhesive device. / Hayata, Hiroki; Okamoto, Marin; Takeoka, Shinji; Iwase, Eiji; Fujie, Toshinori; Iwata, Hiroyasu.

In: Japanese Journal of Applied Physics, Vol. 56, No. 5, 05EC01, 01.05.2017.

Research output: Contribution to journalArticle

@article{73cc02fc5f914076a8618eca544cf065,
title = "Printed high-frequency RF identification antenna on ultrathin polymer film by simple production process for soft-surface adhesive device",
abstract = "In this paper, we present a simple method for manufacturing electronic devices using ultrathin polymer films, and develop a high-frequency RF identification. To expand the market for flexible devices, it is important to enhance their adhesiveness and conformability to surfaces, to simplify their fabrication, and to reduce their cost. We developed a method to design an antenna for use on an operable RF identification whose wiring was subjected to commercially available inkjet or simple screen printing, and successfully fabricated the RF identification. By using ultrathin films made of polystyrene-block-polybutadiene-block-polystyrene (SBS) as substrates - less than 750 nm - the films could be attached to various surfaces, including soft surfaces, by van der Waals force and without using glue. We succeeded in the simple fabrication of an ultrathin RF identification including a commercial or simple printing process.",
author = "Hiroki Hayata and Marin Okamoto and Shinji Takeoka and Eiji Iwase and Toshinori Fujie and Hiroyasu Iwata",
year = "2017",
month = "5",
day = "1",
doi = "10.7567/JJAP.56.05EC01",
language = "English",
volume = "56",
journal = "Japanese Journal of Applied Physics, Part 1: Regular Papers & Short Notes",
issn = "0021-4922",
publisher = "Japan Society of Applied Physics",
number = "5",

}

TY - JOUR

T1 - Printed high-frequency RF identification antenna on ultrathin polymer film by simple production process for soft-surface adhesive device

AU - Hayata, Hiroki

AU - Okamoto, Marin

AU - Takeoka, Shinji

AU - Iwase, Eiji

AU - Fujie, Toshinori

AU - Iwata, Hiroyasu

PY - 2017/5/1

Y1 - 2017/5/1

N2 - In this paper, we present a simple method for manufacturing electronic devices using ultrathin polymer films, and develop a high-frequency RF identification. To expand the market for flexible devices, it is important to enhance their adhesiveness and conformability to surfaces, to simplify their fabrication, and to reduce their cost. We developed a method to design an antenna for use on an operable RF identification whose wiring was subjected to commercially available inkjet or simple screen printing, and successfully fabricated the RF identification. By using ultrathin films made of polystyrene-block-polybutadiene-block-polystyrene (SBS) as substrates - less than 750 nm - the films could be attached to various surfaces, including soft surfaces, by van der Waals force and without using glue. We succeeded in the simple fabrication of an ultrathin RF identification including a commercial or simple printing process.

AB - In this paper, we present a simple method for manufacturing electronic devices using ultrathin polymer films, and develop a high-frequency RF identification. To expand the market for flexible devices, it is important to enhance their adhesiveness and conformability to surfaces, to simplify their fabrication, and to reduce their cost. We developed a method to design an antenna for use on an operable RF identification whose wiring was subjected to commercially available inkjet or simple screen printing, and successfully fabricated the RF identification. By using ultrathin films made of polystyrene-block-polybutadiene-block-polystyrene (SBS) as substrates - less than 750 nm - the films could be attached to various surfaces, including soft surfaces, by van der Waals force and without using glue. We succeeded in the simple fabrication of an ultrathin RF identification including a commercial or simple printing process.

UR - http://www.scopus.com/inward/record.url?scp=85019138964&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85019138964&partnerID=8YFLogxK

U2 - 10.7567/JJAP.56.05EC01

DO - 10.7567/JJAP.56.05EC01

M3 - Article

VL - 56

JO - Japanese Journal of Applied Physics, Part 1: Regular Papers & Short Notes

JF - Japanese Journal of Applied Physics, Part 1: Regular Papers & Short Notes

SN - 0021-4922

IS - 5

M1 - 05EC01

ER -