Production of A1-12 mass%Si alloy rapidly solidified clad strip by melt drag process

Shinsuke Suzuki, Mitsugu Motomura

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

This study was attempted to produce rapidly solidified clad strip by a melt drag process and to examine the clad strip properties. Roll speed V and cooling length L were chosen as principal producing factors. Clad strips consisting of base and overlay strips rigidly bonded with clear bonding interface are produced under the condition where roll speed V was j varied from 30 to 70 m/min and cooling length L was varied from 25 to 100 mm. Clad strips of base and overlay strip both rapidly solidified are produced by cooling length between 75 and 100 mm with a constant rolling velocity 50 m/ min.

Original languageEnglish
Pages (from-to)685-690
Number of pages6
JournalJournal of Japan Institute of Light Metals
Volume45
Issue number12
DOIs
Publication statusPublished - 1995 Jan 1

    Fingerprint

Keywords

  • clad metal
  • melt drag process
  • rapid solidification
  • single roll
  • strip casting

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

Cite this